Environmental

Voltage Tab

Index

A monotonic, increasing integer. When it reaches the maximum value the agent wraps the value back to 1.

Voltage type

Value which indicates the sensor monitoring voltage. Values are:

v2p5- 2.5v sensor. This monitors L3 cache core voltage, micro-processor and co-processor I/O voltage, and Field-Programmable Gate Array (FPGA) memories I/O voltage.
v3p3 - 3.3V sensor. This monitors general TTL supply rail, control logic, micro-processor; micro-processor and co-processor; and SDRAM voltage.
v5 - 5V sensor. This monitors fans and micro-processor core voltage regulator.
CPU sensor. This monitors CPU voltage and micro-processor core voltage.

Description

The description of the entity being monitored for voltage. Values are:

2.5V voltage (millivolts)
3.3V voltage (millivolts)
5V voltage (millivolts)
CPU voltage (millivolts)

Current voltage (millivolts)

The current voltage measurement, in millivolts, if available. A value of -1 indicates that the monitor cannot obtain a value.

Sensor state

The current state of the voltage for the device being monitored. Values are:

Host Processor 7450 and 7455
normal range: 1.55v to 1.65v
minor range: 1.4v to 1.55v or 1.65v to 1.8v
shutdown range: <1.4v or >1.8v
Host Processor 7457
Version 1.0
normal range: 1.35v to 1.45v
minor range: 1.00v to 1.35v or 1.45v to 1.6v
shutdown range: <1.0v or >1.6v
Version 1.1 and later
normal range: 1.25v to 1.35v
normal range: 1.25v to 1.35v
minor range: 1.00v to 1.25v or 1.35v to 1.6v
shutdown range: <1.0v or >1.6v

Slot ID

The slot on which this voltage is found.

Slot type

The type of module found in this slot.

Temperature Tab

Index

A monotonic, increasing number. When this number reaches the maximum value, the agent wraps the value back to 1.

Temperature source

The entity being monitored for temperature.

Description

A description of the temperature being monitored.

Current temperature (degrees Celsius)

The current temperature of the main board PROM in Celsius.

Sensor state

Current state of the temperature which can have one of the following values:

initial—The temperature is at its initial state.
normal—The temperature is normal.
minor alarm—The temperature is greater than or equal to 53 degrees Celsius and less than 63 degrees Celsius.
major alarm—The temperature is greater than or equal to 63 degrees Celsius and less than 73 degrees Celsius.
critical alarm—The temperature is greater than 73 degrees Celsius.
shutdown—The system should be shutdown immediately.
not present—The temperature sensor does not exist.
not functioning—The temperature sensor is not functioning properly.
unknown—Information cannot be obtained because of an internal error.

Slot ID

The slot on which this temperature is found.

Slot type

The type of module found in this slot.

Fans Tab

Index

A monotonic, increasing number. When this number reaches the maximum value, the agent wraps the value back to 1.

Location

Location of the fan. Values are:

left fan
middle fan
right fan

Description

The description of the fan. Values are:

fan 1
fan 2
fan 3

Current speed (% or range)

The current fan speed percentage.

Fan state

The current fan speed state. Values are:

initial: fan speed is at its initial state
normal: fan speed is normal
minor: fan speed is between 75% and 90% of the full fan speed
major: fan speed is between 50% and 75% of the full fan speed
critical: fan speed is less than 50% of the full fan speed
shutdown: system should be shutdown immediately
not present: fan sensor does not exist
not functioning—The fan sensor is not functioning properly.
unknown—Information cannot be obtained due to an internal error.

Slot ID

The slot in which this fan is found.

Power Supplies Tab

Index

A monotonic, increasing integer. When it reaches the maximum value, the agent wraps the value back to 1.

Location

The location of the power supply. Values are:

Left power supply (A)
Right power supply (B)

Description

The description of the power supply. Values are:

Power supply (A)
Power supply (B)

State

The current state of the power supply. Values are:

normal—The power supply is normal.
unknown—The power supply sensor does not exist.

Cards Tab

Index

A monotonic, increasing integer. When it reaches the maximum value the agent wraps the value back to 1.

Type

The location of the phy card. Values are:

left phy card (Phy 0)
right phy card (Phy 1)

Description

Description of the phy card. Values are:

Phy 0 for the left phy card
Phy 1 for the right phy card

State

The current state of the phy card. Values are:

normal—The state of the phy card is normal.
unknown—The phy card is not present.