Revision History

The following table shows the dates and descriptions of revisions to the S-Cz9.2.0 ACLI Configuration Guide.

Date Description
March 2024
  • Initial release.
March 2024
  • Adds corrID for authentication feature content.
May 2024
  • Updates NTP Using an FQDN - Wancom with a note regarding the configuration of network interfaces on a wancom interface.
  • Updates SDES Profile Configuration for accuracy.
  • Updates IDS Phase 2 (Advanced Reporting) to clarify that it is supported on both Enterprise and Service Provider platforms and does not require a special license.
  • Clarifies the impact of changing the add-icmp-ip and remove-icmp-ip parameters on established calls.
  • Removes Note on limitation to Surrogate Agent SPL feature.
July 2024
  • Updates the Add an SSH Known Host Key to correct the ssh-key command syntax.
  • Adds a note to the Manual Trigger Confirmation topic regarding the show sipd endpoint-ip <phone-number> output.
  • Updates the Manipulation Modes and Manipulation Modes in Codec Policies with note about using the Force attribute.
  • Adds features for S-Cz9.2.0p2.
  • Adds AHNT example with TCP CWIN behavior.
October 2024
  • Clarifies the NTP sync process for a standby system.
  • Removes unsupported Enhanced Reason Header Configuration copy.
  • Adds features for S-Cz9.3.0p3.
  • Adds missing cipher for DTLS-SRTP.
  • Removes eap-md5 value from eap-protocol.
  • Updates Many-to-Many Support within Early Dialog Support for accuracy.
  • Removes outdated note on add-sdp-baseBehavior.
  • Corrects the RTC behavior for the access-control element.
  • Adds conditions for populating the Flow-Status AVP (511) over the Rx interface.
  • Adds note indicating the HeaderNat SPL is not supported on the Session Router.
  • Adds note confirming the system brings SAs in service when receiving any SIP request.
  • Updates TLS Session Caching Configuration to note that the session-caching parameter is not RTC supported.
  • Adds change-contact-user to SIP Interface Options.
  • Updates Media Interface Link Detection and Gateway Polling Configuration 2 for accuracy.
  • Updates Access Control Lists Configuration for accuracy.
  • Corrects Opus transcoding bit rates.
  • Clarifies the UDP+TCP SA transport-method parameter.
  • Updates HA Node Parameter Configuration to correct the becoming-standby-time parameter's default and maximum acceptable values.
  • Corrects examples for the P-Asserted-Identity-For parameter in PAI Header Manipulation and Configure Manipulation Attributes on a Realm.
  • Makes assorted corrections to EVS Codec Transcoding Support.
  • Updates Setting Up an IPSec Profile for IMS-AKA Use to correct the red-ipsec-port parameter's default and valid values.
  • Updates P-Early-Media ACLI Configuration to add support as a valid p-early-media-header value.
  • Removes erroneous references to the deprecated TSCF feature.
  • Clarifies SSH key authentication.
December 2024
  • Adds note to clarify format the system uses to map a JSON claim object or array to a target-header.
  • Clarifies entry requirements for running test-translation.
  • Adds features for S-Cz9.3.0p4.
  • Adds an extended key usage configuration requirement for the certificate of a TLS profile with mutual authentication.
  • Updates Configuring SDP Insertion for SIP INVITEs and Configuring SDP Insertion for SIP ReINVITEs for accuracy.
  • Corrects Accommodating m=line Omissions During Call Setup to state that the fix-missing-mlines option is configured under media-manager.
February 2025
  • Adds 15 second check and trap interval for memory utilization alarms/traps.
  • Adds features for S-Cz9.3.0p5.
  • Updates certificate examples to use sha256 signature.
  • Adds missing CA Store feature