March 2023 |
|
May 2023 |
- Clarifies the effect on media release when
you set nat-traversal to always.
- Provides a use case for the
release-of-bearer signaling flow subscription setting on
an external policy server.
- Clarifies that wancom-health-score has no
effect on a phy-interface set to media.
- Clarifies the effect of
stop-sag-recurse.
- Corrects value to NMC treatment
parameter.
- Removes weak ciphers from ipsec-algorithms
attribute.
- Updates DH groups available in
ike-config.
- Updated values of
session-max-life-limit.
- Corrects max values in
media-manager-config.
- Corrects max values in
network-parameters.
- Adds recommendation that the user does not
disable and re-enable an operational sip-interface with
TCP ports.
- Corrects the value range for
nat-interval.
- Clarifies the use of default-2833-duration
and rfc2833-timestamp.
- Adds 9 missing parameters to
media-manager-config.
- Updates the maximum value allowed for
account-config, imtermediate-period.
- Corrects various typographical errors.
- Updates acceptable values for the following
dnsalg-constraints parameters:
- burst-rate-window
- max-sustain-rate
- max-inbound-sustain-rate
- max-outbound-sustain-rate
- sustain-rate-window
- max-latency
- time-to-resume
- max-burst-rate
- max-inbound-burst-rate
- max-outbound-burst-rate
- Adds the following parameters to the
certificate-record topic:
- key-algor
- digest-algor
- ecdsa-key-size
- cert-status-profile-list
- Adds the following parameters to the
cert-status-profile topic:
- trusted-cas
- crl-update-interval
- crl-list
- Adds CRL protocol option to the
cert-status-profile, type parameter.
- Updates the accepted values for the
following access-control parameters:
- deny-period
- untrusted-signal-threshold
- maximum-signal-threshold
- invalid-signal-threshold
- average-rate-limit
- transport-protocol
- Adds the nat-invalid-message-threshold
access-control parameter.
- Updates the bfd-config, bfd-session,
hold-down-time parameter's description for clarity.
|
August 2023 |
- Adds values to standard-pkt-rate in
media-profile.
- Adds clock-rate attribute to
media-profile.
- Adds the sdp-ip-port parameter to
restricted-latching at S-Cz9.2.0p2.
- Lots of minor corrections.
- Corrects the disabled value for
operation-type parameter.
|
October 2023 |
- Adds the sa-routes-traps parameter.
- Clarifies DynamicTCP and DynamicTLS
operation.
- Adds protocols to system-access-list.
- Corrects output for show MBCD and show MBCD
errors.
|
December 2023 |
- Adds topic for 'show platform
nftables'.
- Removes deprecated show algd command.
- Removes deprecated load image command.
- Updates the session-agent, allow-next-hop-lp
parameter to show as unsupported.
- Adds the httpclient-cache-size-multiplier
parameter at S-Cz9.2.0p4.
- Clarifies that network-interface is not RTC
supported.
|
February 2024 |
- Adds dos-action-at-session parameter to
realm-config at S-Cz9.1.0p10.
- Adds static-tcp-source-port to
session-agent.
- Removed AP1100 restriction on management
interface VLANs.
- Update values for eap-protocol.
- Updates the sti-server-group, straregy
parameter to mark the least-busy and prop-dist values as
unsupported.
|
April 2024 |
- Updates the sti-server, sti-attest
description for accuracy.
- Adds description to show arp's active-count
argument.
- Clarifies the impact of changing the
add-icmp-ip and remove-icmp-ip parameters on established
calls.
|
June 2024 |
- Corrects issue with package-logfiles
command.
|
November 2024 |
- Adds clarification on the format for
specifying IPv6 addressing in the access-control
element.
- Updates tls-global's session-caching
parameter to note that this parameter is not RTC
supported.
- Updates the network-interface,
gw-heartbeat's state parameter default value for
accuracy.
- Adds a note to the local-account command
regarding the resetting of passwords.
- Updates media-manager-config to indicate
deprecated parameters.
- Clarifies the UDP+TCP SA transport-method
parameter.
- Corrects ipsec, ipsec-global-config's
red-ipsec-port parameter's default and valid
values.
- Removes erroneous references to the
deprecated TSCF feature.
- Removes ladder-diagram-rows parameter from
sip-monitoring.
- Clarifies entry requirements for running
test-translation.
- Adds an extended key usage configuration
requirement for the certificate of a TLS profile with
mutual authentication.
|
January 2025 |
- Updates sip-interface, add-sdp-invite to
include the both option.
- Corrects the sdes-profile, mki parameter's
description to state that the default value is
disabled.
- Corrects the show configuration command
syntax.
- Updates session-recording-group to correct
the simultaneous-recording-server parameter's default
value.
|
March 2025 |
- Removes IPv6 from address attribute of syslog-servers element.
- Adds IPv6 as valid entry for local and remote-ip-addr-match
parameters.
- Corrects the syntax for the allow-any parameter within the
allowed-elements-profile element.
- Adds SNMP limitation on show uptime.
- Adds note on restore-backup-config.
|