March 2022 |
|
May 2022 |
- Adds local-port-match-max and remote-port-match-max
in Sample Security Policy Configuration in IMS Support
chapter.
- Adds local-port-match-max and remote-port-match-max
in Security Policy Configuration in Security chapter.
- Adds Local Route Table Performance topic.
- Clarifies sequence for sending queries to the
primary and backup DNS servers.
- Highlights that save and activate are not relevant
to a standby system in HA pair feature setup procedure.
- Reorganization changing Surrorgate Agent
placement.
- Add username restrictions to local-accounts.
|
August 2022 |
- Updated certificate record config to include limits
of 'state' field.
- Removed ECDSA from PKCS12 note.
- Fixed typographical error in Number Translation
chapter.
- Clarified use of add-index in
translation-rules.
- Corrects default tls-version.
- Adds limitation that hardware platform SBCs support
a maximum of 4 ENUM servers.
- Adds content for S-Cz9.1.0p2.
- Adds reference to OCSR support or STIR/SHAKEN at
S-Cz9.1.0p2.
- Adds a note about
sip-dynamic-hnt in Adaptive NHT
Configuration section.
- Adds details about
min-reg-expire in HNT Configuration
section.
|
October 2022 |
- Adds recommendation on forwarding core configuration
based on the use of PMD drivers,
- Clarifies the requirement for media-policy for
setting all DSCP codes on egress, and includes passthrough
configuration.
- Updates note about order of codecs in Conditional
Codec Policies section.
- In local-policy, changed the date format's colon to
a dash in activate-time (after the year) and deactivate time
(after the year and after the month).
- Various typographical error fixes.
|
November 2022 |
- Corrects use of anonymous-priority in local-policy
configuration.
- Fixes various typographical errors.
- Updates "Telephony Fraud Protection Target Matching
Rules" section to include information about realm
precedence.
- Update values for transport-method within
session-agent.
- Updates "Configuring a PLMN INFO Change
Subscription" for accuracy.
|
December 2022 |
- Updates the "MSRP Management Monitoring"
topic.
|
February 2023 |
- Updates LRT details in Multi-Tiered LRT Route
Selection section in Session Routing and Load Balancing
chapter.
- Removes unsupported feature Daylong Transcoding
Session Cleanup section from Transcoding chapter.
- Updates comfort noise transcoding support details
in Supported and Unsupported Platforms and Behavior section in
transcoding chapter.
- Updates Voice Scenario 3 in Transcoding
chapter.
- Adds missing DSCP for NSEP tasks.
- Corrects range for security-policy's priority
attribute.
- Clarifies partial support for ITU Q.1912.5.
- Adds the Reason Attestation and SIP to HTTP Header
Mapping features at 910p5.
- Adds port 3799 to the authentication source-port
parameter.
- Corrects value list for manual, auth-algo
parameter.
|
May 2023 |
- Corrects STIR/SHAKE Add/Modify header behavior.
- Adds HTTP client management description.
- Corrects the sip-interface, sip-ports' ports
minimum acceptable value.
- Corrects the sip-config acceptable values for the
following parameters:
- inactive-dynamic-conn
- invite-expire
- trans-expire
- max-timer
- init-timer
- Fixes various typographical errors.
- Clarifies the effect on media release when you set
nat-traversal to always.
- Updates the "HMU Support for RTP to SRTP
Interworking" and "HMU Configuration" topics. Removes the
"Configure HMU Support for RTP and SRTP Interworking"
topic.
- Provides a use case for the release-of-bearer
signaling flow subscription setting on an external policy
server.
- Clarifies the effect of stop-sag-recurse.
- Adds valid range values for q850-cause.
- Corrects value to NMC treatment parameter.
- Fixes various typographical errors.
- Corrects the following sip-interface acceptable
values:
- max-nat-interval
- nat-int-increment
- nat-test-increment
- Corrects max values in TCP port configuration
- Corrects max values in network-parameters.
- Adds recommendation that the user does not disable
and re-enable an operational sip-interface with TCP ports.
- Removes media-if-peercheck-time switchover
warning.
- Adds detail wherein the system suppresses a
re-INVITE during REPLACES processing.
- Adds limitation when using the SurrogateContact SPL
module.
- Adds PSAP callback and Pooled transcoding features
at S-Cz9.1.0p6.
- Adds the "SIP hold-refer-reinvite" topic to the SIP
chapter.
- Removes "Configuring Local Media Playback using SPL"
section as it is unsupported.
- Updates AMR-NB and AMR-WB Specifications for
accuracy.
- Adds missing redirect-action parameter.
- Adds note indicating that the ELIN SPL is not
supported on the Session Router.
- Removes deprecated translate-non-inband-event.
- Corrects the system's Subscriber Information AVP
behavior.
- Corrects the value range for nat-interval.
- Adds a Note to the "Telephony Fraud Protection"
topic that the Enterprise Session Router does not support
Telephony Fraud Protection.
- Corrects ptimes for ILBC (13.33 and 15.2).
- Differentiates ptimes for transcodable codecs for
vSBC and points to the release notes for the vSBC transcodable
codec list.
- Clarifies the use of default-2833-duration and
rfc2833-timestamp.
- Updates TACACS cmd/cmd-arg description.
|
July 2023 |
- Clarifies that ssh-config governs SSH server not
SSH client.
- Adds TCM3 content at S-Cz9.1.0p7.
- Removed duplicate Restricted Media Latching
content.
|
September 2023 |
- Adds steering pool content at S-Cz9.1.0p8.
- Adds the sa-routes-stats and sa-routes-traps
parameters.
- Clarifies where Baudot to T.140 is available.
|
November 2023 |
- Clarifies DynamicTCP and DynamicTLS operation.
- Adds protocols to system-access-list.
- Adds Codec table with EVS details.
- Corrects caps in proxy-mode values.
- Adds OCSP cert-status-profile details.
- Fixed alarm-threshold value range.
- Adds Intel limitation for software transcoding.
- Adds the httpclient-cache-size-multiplier parameter
at S-Cz9.1.0p9.
- Adds the verstat delimiter option to
STIR/SHAKEN.
- Updates NPLI deployment caveat to include
location-optimization-on-aar
exclusion.
- Removes references to the deprecated session-agent,
allow-next-hop-lp parameter.
|
February 2024 |
- Updates "SIP HNT Forced Unregistration
Configuration" with a note clarifying force-unregistration
option's requirements.
- Clarifies that network-interface is not RTC
supported.
- Provides reasoning for r-factor data seeming to
conflict with MOS.
- Adds Subscription-Id-Data AVP as feature at
S-Cz9.1.0p10.
- Adds session-level DoS feature at
S-Cz9.1.0p10.
- Adds http-clearDead-conn-timer feature at
S-Cz9.1.0p10.
- Adds the exclusive-http-client-port-range feature
at S-Cz9.1.0p10.
- Updates note about iLBC call establishment in
transcoded call topic.
|
April 2024 |
- Adds info about SSH keys for HA.
- Updates SDES Profile Configuration for accuracy.
- Updates IDS Phase 2 (Advanced Reporting) to clarify that it is
supported on both Enterprise and Service Provider platforms and
does not require a special license.
|
June 2024 |
- Clarifies the impact of changing the add-icmp-ip and remove-icmp-ip
parameters on established calls.
- Updates the Add an SSH Known Host Key to correct the ssh-key
command syntax.
- Adds a note to the Manual Trigger Confirmation topic regarding
the show sipd endpoint-ip <phone-number> output.
- Updates the Manipulation Modes and Manipulation Modes in Codec
Policies with note about using the Force attribute.
|
August 2024 |
- Updates the Add an SSH Known Host Key to include examples of the
ssh-key command.
|
October 2024 |
- Updates Many-to-Many Support within Early Dialog Support for
accuracy.
- Removes outdated note on add-sdp-baseBehavior.
- Corrects the RTC behavior for the access-control element.
- Adds pre-requisites for populating the Flow-Status AVP.
- Adds conditions for populating the Flow-Status AVP (511) over the Rx
interface.
- Adds note indicating the HeaderNat SPL is not supported on the
Session Router.
- Adds note confirming the system brings SAs in
service when receiving any SIP request.
- Updates TLS Session Caching Configuration to note that the
session-caching parameter is not RTC supported.
- Adds change-contact-user to SIP Interface Options.
- Updates Media Interface Link Detection and Gateway Polling
Configuration 2 for accuracy.
- Updates Access Cotrol List Configuration for accuracy.
- Corrects Opus transcoding bit rates.
- Clarifies the UDP+TCP SA transport-method
parameter.
- Updates HA Node Parameter Configuration to correct the
becoming-standby-time parameter's default and maximum acceptable
values.
- Makes assorted corrections to EVS Codec Transcoding
Support.
- Updates Setting Up an IPSec Profile for IMS-AKA Use to correct
the red-ipsec-port parameter's default and valid values.
- Updates P-Early-Media ACLI Configuration to add support as a
valid p-early-media-header value.
- Removes erroneous references to the deprecated TSCF
feature.
|