Parameters

address

Enter the IP address of the host associated with the sip-port entry

An IPV6 address is valid for this parameter.

port

Enter the port number for this sip-port

• Default: 5060
• Values: Min: 1 / Max: 65535

transport-protocol

Select the transport protocol associated for this sip-port

• Default: UDP
• Values:
  • TCP
  • UDP
  • TLS
  • SCTP

multi-homed-addrs

Enter one or more IP addresses that are multihomed on this SIP Interface, for use with SCTP. Multiple IP addresses are entered in parentheses, separated by spaces.

tls-profile

Select the type of anonymous connection from session agents allowed.

Note:

This parameter is only visible with appropriate licensing.

allow-anonymous

Select the type of anonymous connection from session agents allowed.

• Default: all
• Values:
  • all—Allow all anonymous connections
  • agents-only—Only requests from session agents allowed
  • realm-prefix—Session agents and address matching realm prefix
  • registered—Session agents and registered endpoints (REGISTER allowed from any endpoint)
  • register-prefix—All connects from SAs that match agents-only, realm-prefix, and registered agents

ims-aka-profile

Enter the name value for the IMS-AKA profile configuration to use for a SIP port


Path

sip-ports is a subelement is under the sip-config element. The full path from the topmost ACLI prompt is: configure terminal , and then session-router , and then sip-interface , and then sip-ports.