Constraints

This configuration element is not available for the Enterprise Session Border Controller or for the Subscriber-Aware Load Balancer.

Parameters

name

Configured name of this manipulation rule. This is the key field.

• Default: empty
• Values: Character string, no special characters with the exception of the underscore characters. Do not start name with numeric character.

avp-code

AVP in the Diameter message to be of manipulated by this rule. This parameter must be configured.

• Default: 0
• Values: Valid AVP code

descr-avp-code

Description of AVP code to be manipulated.

• Default: empty
• Values: 256 character string

avp-type

The data type of the content of the field the system PD is parsing to perform a manipulation on. This parameter must be configured with an enumerated value. Refer to the Diameter standards document for the encodings of individual AVPs.

• Default: none
• Values: none | octet-string | octet-hex | integer32 | unsignedint32 | address | diameteruri | enumerated

action

Type of manipulation action to perform on this AVP.

• Default: none
• Values: none | add | delete | store | diameter-manip | group-manip | find-replace-all | replace

comparison-type

Select the comparison type that the match-value uses.

• Default: case-sensitive
• Values: case-sensitive | case-insensitive | pattern-rule | boolean

msg-type

The message type to which this Diameter manipulation rule applies.

• Default: any
• Values:
  • any—Both Requests and Reply messages
  • request—Request messages only
  • reply— Reply messages only

msg-cmd-code

The Diameter message code that this rule applies to. This parameter must be configured or the manipulation can not be applied to any message.

• Default: 0
• Values: Valid Diameter message code

match-value

Enter the exact value to be matched. The action you specify is only performed if the header value matches. The entered value must match the comparison type.

• Default: empty

new-value

The explicit value for a new element or replacement value for an existing element. You can enter an expression that includes a combination of absolute values, pre-defined parameters, and operators.

• Default: empty

avp-header-rule

Access the avp-header-rule subelement.

Path

diameter-manip-rule is a subelement under the diameter-manipulation element in the session-router path. The full path from the topmost ACLI prompt is: session-router, and then diameter-manipulation, and then diameter-manip-rule