1. ACLI Reference Guide
  2. ACLI Configuration Elements A-M
  3. account-config > push-receiver

account-config > push-receiver

You can configure multiple CDR push receivers for use with the FTP push feature.

Parameters

server
Set the IP address of the SFTP server to which you want the Oracle Communications Session Border Controller to push CDR files
  • Default: 0.0.0.0
port
Enter the port number on the FTP/SFTP server to which the Oracle Communications Session Border Controller will send CDR files.
  • Default: 21
  • Values: Min: 1 / Max: 65535
admin-state
Set the state of an FTP/SFTP push receiver to enabled for the Oracle Communications Session Border Controller to send CDR files to it
  • Default: enabled
  • Values: enabled | disable
remote-path
Enter the absolute path on which the CDR files are sent to the push receiver. CDR files are placed in this location on the FTP/SFTP server.
  • Default: empty
  • Values: <string> remote pathname
filename-prefix
Enter the filename prefix to prepend to the CDR files the Oracle Communications Session Border Controller sends to the push receiver. The Oracle Communications Session Border Controller does not rename local files.
  • Default: none
  • Values: <string> prefix for filenames
priority
Enter a number 0 through 4 to set the priority of this push receiver in relation to the others you configure on the system. The highest priority—and the push receiver the system uses first—is 0. The lowest priority—and the push receiver the system uses last—is 4.
  • Default: 4
  • Values: Min: 0 (highest) / Max: 4 (lowest)
protocol
Select the transport protocol to be used for this push receiver.
  • Default: ftp
  • Values: ftp | sftp
username
Enter the username the Oracle Communications Session Border Controller uses to connect to push receiver.
password
Enter the paissword corresponding to the username of this push receiver.
public-key
Leave blank, regardless of authentication type.
temp-remote-file
When enabled, the system prepends the characters "tmp-" to a CDR file during transfer.
  • Default: disabled
  • enabled

Path

push-receiver is a subelement under the account-config element. The full path from the topmost ACLI prompt is: configure terminal > session-router > account-config > push-receiver.