June 2021 |
- Initial
release.
- Removes reference to the deprecated SRR
feature.
- Updates the reset command.
|
September 2021 |
- Clarifies behavior of the
allow-local-authorization parameter.
|
December 2021 |
- Corrects values for session-agent,
transport-method.
- Updates for default value and range of
values for becoming-standby-time parameter in redundancy
section.
- Removes call-recording-server-id, xnq-state
and hairpin-id parameters from realm-config as SBC no
longer supports these parameters.
- Adds default value and range of values for
subscription-id-type parameter in realm-config
section.
- Replaces ext-policy-server with
ext-policy-svr in ACLI Configuration Elements
chapter.
- Updates for default value and range of
values for rtcp-muxi parameter in realm-config
section.
- Updates for default value for
tcp-keepalive-idle-timer parameter in network-parameters
section.
- Updates for default, min and max values for
tcp-keepalive-count parameter in network-parameters
section.
- Updates for default value and range of
values for media-type parameter in network-interface
section.
- Updates for tos-values parameter in
media-policy > tos-settings section.
- Updates for default value and range of
values for retarget-requests parameter in
local-routing-config section.
- Updates for file-name parameter in
local-routing-config section.
- Updates for default value of q850-cause
parameter in local-response-map > entries
section.
- Updates for default value of signaling-mtu
parameter in network-interface section.
- Removes edit parameter from
local-response-map as SBC no longer supports this
parameter.
- Updates for default value of eloc-str-lkup
parameter in local-policy-attributes section.
- Updates for default value of https-state
parameter in http-server section.
- Updates for default value of state
parameter in http-client section.
- Updates for range of values for
cache-inactivity-timer parameter in enum-config
section.
- Updates for default value and range of
values for timeout parameter in enum-config
section.
- Adds new parameter trap-on-status-change in
dns-config section.
- Updates for default value of
extra-dnsalg-stats parameter in dns-config section.
- Updates for default, min and max values for
port in comm-monitor monitor-collector section.
- Updates for default value of dtmf-in-audiop
parameter in codec-policy section.
- Adds new parameter evrc-tty-baudot-transcode
in codec-policy section.
- Adds new parameter secure-dtmf-cancellation
in codec-policy section.
- Updates for range of values for
extended-key-usage-list parameter in certificate-record
section.
- Updates for range of values for
key-usage-list parameter in certificate-record
section.
- Updates for default value of
authentication-methods parameter in authentication >
tacacs-servers section.
- Updates for default value and range of
values of authentication-methods parameter in
radius-servers section.
- Updates for default value of
server-assigned-privilege parameter in authentication
section.
- Adds new parameter diameter-out-manip in
account-config account-servers section.
- Adds new parameter diameter-in-manip in
account-config account-servers section.
- Adds new parameter watchdog-ka-timer in
account-config account-servers section.
- Adds new parameter domain-name-suffix in
account-config account-servers section.
- Adds new parameter origin-realm in
account-config account-servers section.
- Updates for default and min values for
file-rotate-time parameter in account-config
section.
- Updates for mm-in-system parameter in
realm-config section.
- Updates of values for options in
network-parameters section.
- Updates of values for string-lookup in
local-routing-config section.
- Changes in local-error parameter as SIP
response defaults to “licensed-session-capacity-reached”
in local-response-map > entries section.
- Adds new parameter
verify-certificate-info-register in enforcement-profile
section.
- Adds note for submet-mask in
local-address-pool address-range section.
- Corrects the maximum value of
tcp-number-of-ports-per-flow to 4.
- Clarifies that the standard maximum
character limit applies to the alternate-name and
local-policy parameters.
- Updates local-error parameter in
local-response-map-entries section.
|
April 2022 |
- Updates to support information about
capture command.
- Corrects default value for
ping-all-addresses parameter in session-agent.
- Updates for default and range of values for
kpml-interworking parameter in session-agent
section.
- Renames kpmlRFC2833-iwf-on-hairpin to
kpml2833-iwf-on-hairpin in session-agent parameter and
updates for default and range of values.
- Updates for default and range of values for
ringback-trigger parameter in session-agent
section.
- Adds spl-options parameter in
session-agent.
- Adds sip-recursion-policy parameter in
session-agent-group.
- Adds force-parity parameter in
session-recording-server.
- Updates for default and range of values for
reject-message-window in session-router-config.
- Updates for default and range of values for
force-reinvite in session-timer-profile.
- Adds auto-realm-id, pac-method,
pac-interval,pac-strategy, pac-load-weight,
pac-session-weight,pac-route-weight,
pac-callid-lifetime, pac-user-lifetime parameters for
sip-config.
- Updates for default and range of values for
nsep-user-sessions-rate parameter in sip-config.
- Updates for default and range of values for
allow-pani-for-trusted-only parameter in
sip-config.
- Updates for default value for
sag-lookup-on-redirect parameter in sip-config.
- Adds default value and range of values for
create-dynamic-sa parameter in sip-config.
- Updates default value and range of values
for npli-upon-register parameter in sip-config.
- Updates default value and range of values
for cache-loc-info-expire parameter in sip-config.
- Adds default value and range of values for
retry-after-upon-offline parameter in sip-config.
- Adds a note for burst-rate-window in
session-constraints.
- Updates bootparam parameters.
- Adds public-key as unsupported in ACLI
Configuration Elements N-Z.
- Updates default and range of values for
comm-monitor in system-config.
- Defines properly mps-volte parameter in
sip-config.
- Updates default value for allow-any
parameter in allowed-elements-profile.
- Updates default and range of values for
tls-version in tls-profile parameter.
- Adds allow-self-signed-cert parameter in
tls-profile.
- Removes inapplicable parameters from
tcp-media-profile.
- Removes inapplicable parameter from
tcp-media-profile > profile-entry.
- Renames tcp-media-profile >
tcp-media-profile-entry to tcp-media-profile >
profile-list.
- Adds msrp related parameters to
tcp-media-profile > profile-list.
- Adds default and range of values for
push-success-trap-state in system-config >
collect.
- Adds new values for type parameter in
system-config > alarm-threshold.
- Adds new parameters - register-mode,
triggered-inactivity-interval and triggered-oos-response
in surrogate-agent.
- Updates default value for proto-neg-time in
ssh-config parameter.
- Adds spl-options in spl-config
- Renames view name to name,
included-sub-trees to included-list and
excluded-sub-trees to excluded-list in
snmp-view-entry.
- Renames group-name to name and sec-level to
security-level. Adds default value for security-level.
Removes sec-model. Adds mp-model and write-view
parameters in snmp-group-entry.
- Renames group-name to name and sec-level to
security-level. Adds default value for security-level.
Removes sec-model. Adds mp-model and write-view
parameters in snmp-group-entry.
- Adds default value for default-v6-gateway.
Adds new parameters - http-timeout, pko-rake-pkt ,
pko-rake-burst, ecc-chk-pkt, forwarding-cores,
dos-cores, transcoding-cores in system-config.
- Adds default value for cleanup-time-of-day
in system-config.
- Adds telnet-timeout in system-config.
- Adds default value and range of values for
global-count in sip-recursion-policy.
- Corrects the default value for redirection
in sip-profile.
- Adds media-type in sip-manipulation >
mime-sdp-rules > sdp-media-rules.
- Corrects the values for action parameter and
adds definition of out-of-dialog msg-type in
sip-manipulation > mime-sdp-rules.
- Corrects the values for action parameter and
path for mime-header-rules in sip-manipulation >
mime-isup-rules > mime-header-rules.
- Adds content-type and format parameters,
corrects the values for action and changes mime-headers
to mime-header-rules in sip-manipulation >
mime-rules.
- Renames parameter-format to format,
parameter-type to type and corrects values for action in
sip-manipulation > mime-isup-rules >
isup-param-rules.
- Renames mime-headers to
mime-header-rules,corrects values for isup-spec and
action, adds out-of-dialog for msg-type in
sip-manipulation > mime-isup-rules.
- Adds values for action,comparison-type and
match-val-type in sip-manipulation > header-rules
> sip-element-rules.
- Removes duplicate entry of sdp-line-rules
element,updates action values and adds sdp-line-rules in
sip-manipulation > mime-sdp-rules >
sdp-session-rules > sdp-line-rules.
- Adds new values for action and msg-type in
sip-manipulation > header-rules
- Adds atcf-icsi-match,service-tag and
spl-options parameters in sip-interface.
- Updates values for hist-to-div-for-cause-380
in sip-interface.
- Updates 183-no-sdp value for
ringback-trigger parameter in sip-interface
- Updates ims-aka-feature as unsupported in
sip-interface.
- Updates default value for redirect-action in
sip-interface.
- Updates default value and range of values
for atcf-management-uri in sip-feature-caps.
- Updates default and range of values for
start-time, end-time and sample-interval in
system-config > collect > group-settings .
- Updates tacas-authorization-arg-mode as
unsupported in authentication > tacacs-servers.
- Adds options parameter in phy-interface.
- Updates examples for included-list and
excluded-list in snmp-view-entry.
- Adds note about virtual platform in show
interfaces command.
- Updates system-config >
directory-cleanup as unsupported.
- Updates average-rate-limit as unsupported
in static-flow parameter.
- Updates state as not RTC supported
parameter under media-manager-config.
- Adds RDs Terminated, CSs Terminated, and
CSs Not Established counters in show rec section.
- Updates lrt<filename> in synchronize
arguments.
- Updates dest-network, netmask and gateway
values and adds note about IPV4 in host-route
element.
- Adds clarification about Transport and
Secure parameter to 'show registration sipd by-user'
output
- Removed obsolete complexity requirements
from the secret command.
- Added example of alternate-name
- Clarified parameters in
ikev2-ipsec-wancom0-params
- Adds local-port-match-max and
remote-port-match-max in ipsec >
security-policy.
- Adds audit-logging element
|
July 2022 |
- Updates 'show security' for TLS stats
- Adds comment that add-index is not used in
a translation-rule when the type is set to replace
|
September 2022 |
- Adds the
http-strict-transport-security-policy parameter to the
"http-server" topic.
- Updates the "log-level" topic with tasks you
cannot set with the log-level command.
|
November 2022 |
- Removes "surrogate-agent" option from
clear-cache registration sip command.
- Fixes min/max ranges on various
parameters.
|
February 2023 |
- Adds OCSP element.
- Updates ssh-key command.
|
March 2023 |
- States limitations with ike-sainfo on
virtual platforms.
- Corrects value list for manual, auth-algo
parameter.
- Updates the valid values for the following
sip-interface parameters:
- invite-expire
- trans-expire
- registration-interval
- tcp-nat-interval
- nat-interval
- contact-mode
- Updates the valid values for the following
sip-config parameters:
- inactive-dynamic-conn
- invite-expire
- trans-expire
- max-timer
- init-timer
|
May 2023 |
- Clarifies the effect on media release when
you set nat-traversal to always.
- Provides a use case for the
release-of-bearer signaling flow subscription setting on
an external policy server.
- Clarifies that wancom-health-score has no
effect on a phy-interface set to media.
- Clarifies the effect of
stop-sag-recurse.
- Updates the reset auth and reset radd
descriptions for accuracy.
- Corrects value to NMC treatment
parameter.
- Adds recommendation that the user does not
disable and re-enable an operational sip-interface with
TCP ports.
- Updates local-policy, activate-time and
deactivate-time parameters' acceptable syntax.
- Changes media-profile, average-rate-limit
values for SD5 platforms at 900p9.
- Clarifies the use of default-2833-duration
and rfc2833-timestamp.
- Adds 9 missing parameters to
media-manager-config.
- Corrects various typographical errors.
- Updates the maximum value allowed for
account-config, imtermediate-period.
- Updates the valid values for the following
dnsalg-constraints parameters:
- burst-rate-window
- max-sustain-rate
- max-inbound-sustain-rate
- max-outbound-sustain-rate
- sustain-rate-window
- max-latency
- time-to-resume
- max-burst-rate
- max-inbound-burst-rate
- max-outbound-burst-rate
- Adds the following parameters to the
certificate-record topic:
- key-algor
- digest-algor
- ecdsa-key-size
- cert-status-profile-list
- Adds the following parameters to the
cert-status-profile topic:
- trusted-cas
- crl-update-interval
- crl-list
- Adds CRL protocol option to the
cert-status-profile, type parameter.
|
August 2023 |
- Fixes various typographical errors.
- Adds the access-control,
nat-invalid-message-threshold parameter.
- Updates the accepted values for the
following access-control parameters:
- deny-period
- untrusted-signal-threshold
- maximum-signal-threshold
- invalid-signal-threshold
- average-rate-limit
- transport-protocol
- Updates the bfd-config, bfd-session,
hold-down-time parameter's description for clarity.
- Adds values to standard-pkt-rate in media-profile.
- Updates max value in police-rate in media-profile.
- Adds clock-rate attribute to media-profile.
- Updates max value for tolerance-window.
- Lots of minor corrections.
- Corrects the disabled value for operation-type parameter.
|
December 2023 |
- Adds the sa-routes-traps parameter.
- Clarifies DynamicTCP and DynamicTLS operation.
- Adds protocols to system-access-list.
- Corrects output for show MBCD and show MBCD errors.
- Removes deprecated show algd command.
- Removes deprecated load image command.
- Updates the session-agent, allow-next-hop-lp parameter
to show it is unsupported.
- Clarifies that network-interface is not RTC supported.
|