Parameters

name

Name of this session recording server element.

description

Brief description of this session recording server. This parameter is optional.

realm

Realm in which this session recording server is located.

mode

Operating mode of this session recording server.

• selective—Unique recording server created per communication session
• persistent

destination

Address of the session recording server that defines the SIP address (request URI) of the session recording server. Enter values in the format IP address or FQDN. Default is no value specified.

port

The port portion of the destination address.

• Default: 5060
• Min: 1025 / Max: 65535

transport-method

Protocol used to communicate with the recording server.

• Default: DynamicTCP
• UDP
• UDP+TCP
• DynamicTCP
• StaticTCP
• DynamicTLS
• StaticTLS
• DTLS
• TLS+DTLS
• StaticSCTP

force-parity

Enables the system to enforce port number parity for flows between the system and the session recording server.

• Default: Disabled
• Values: Enabled | Disabled

ping-method

SIP method type to ping with session recording server.

ping-interval

Rate at which to ping the Session Agent configured as a session recording server.

• Default: 0
• Min: 0 / Max: 4294967295

refresh-interval

Enables the SIP OPTIONS request/response mechanism, and assign a value to the refresh-timer toward the SIPREC server. This measures the maximum allowed interval (in seconds) between the OPTIONS request sent by the call-recording client and the OPTIONS response returned by the call-recording server.

By default, refresh-interval is set to 0, which disables detection of a failed recording session dialog. Assignment of any non-zero value enables detection and sets the allowable interval between OPTIONS requests and responses.

• Default: 0
• Min: 0 / Max: 4294967295

Path

session-recording-server is an element under the session-router path. The full path from the topmost ACLI prompt is: configure terminal , and then session-router , and then session-recording-server.