1. ACLI Reference Guide
  2. ACLI Configuration Elements A-M
  3. iwf-config

iwf-config

The iwf-config element enables the H.323—SIP interworking (IWF) and provides a list of media profiles to use when IWF translations occur.

Parameters

state
Enable or disable the Oracle Communications Session Border Controller’s IWF
  • Default: disabled
  • Values: enabled | disabled
media-profiles
Set the default media SDP profiles that Oracle Communications Session Border Controller uses for Slow Start IWF calls. This field does not have a relationship with the media-profiles field found in the h323-stack subelement, as the values configured there affect calls that take place entirely in H.323. This list must be populated with the SDP codec names.
  • Values: PCMU | PCMA | G722 | G723 | G726-32 | G728 | G729 | H261 | H263
logging
Enable or disable IWF-related SIP messages logging
  • Default: disabled
  • Values: enabled | disabled
add-reason-hdr
Enable or disable adding the Reason header to IWF calls
  • Default: disabled
  • Values: enabled | disabled

Path

iwf-config is an element under the session-router path. The full path from the topmost ACLI prompt is: configure terminal , and then session-router , and then iwf-config.

Note:

This is a single instance configuration element.