Revision History

The following table lists the dates and description of the revisions to this document.

Date Description
March 2025
  • Initial release.
June 2025
  • Updates the following for accuracy:
    • sip-interface, contact-mode
    • authentication, radius-servers, authentication-mode
    • ntp-sync
  • Adds New Features for S-Cz10.0.0p2.
  • Add the hops parameter for use with the ping-method OPTIONS configuration syntax.
  • Adds a note to system-config stating that telnet-timeout is deprecated.
  • Fixes various typographical errors.
  • Corrects the description of the ftp-push parameter.
  • Adds caveat with using 0.0.0.0 as a source-address.
August 2025
  • Removed claim that SNMP/SSH IP are lists rather than single-value parameters.
  • Adds note that network-interface and phy-interface are not RTC.
October 2025
  • Adds network-interface requirement for TACACS and RADIUS.
  • Add SIPREC statement for suppress-hold-resume-reinvite.
  • Adds right-to-left note on codec-policy.
  • Clarifies show backup-config.
  • Clarifies partial RTC support for access-control.
  • Adds or updates the following for S-Cz10.0p4 features:
    • Adds response-code-and-phrase-config and response-code-and-phrase-entry configuration elements.
    • Adds security > global-trusted-ca configuration element and global-trusted-ca command.
    • Adds show reroute command.
    • Adds sip-invites-detail to list of group names under system-config > collect > group-settings.
    • Adds detail argument to show sipd <message>, when message is INVITE.
    • Adds response-code-and-phrase-config-name to sip-config.
    • Adds ESNET as a valid namespace for r-value in rph-profile.
December 2025
  • Adds or updates the following for S-Cz10.0p5 features:
    • Adds http-enable parameter to system-config> comm-monitor
    • Adds HTTP-STIR type and session-agent parameter to comm-monitor > filter-profile
    • Adds tone-detection-xcode-only parameter to codec-policy
    • Adds modem-ans and modem-orig as options for tone-detection in codec-policy
    • Adds default-teams-realm in realm-config
    • Adds use-rtp-marker-bit in media-manager-config
  • Adds cpu-datapath and memory-datapath as values for the type parameter in system-config > alarm-threshold, specifies that value must be more than 30 for these.
  • Updates list of supported crypto algorithms in sdes-profile.
April 2026
  • Updates comm-monitor, filter-profile's "type" and "method' parameter descriptions for clarity.
  • Corrects the date format in local-policy, activate-time and deactivate-time and session-router, holidays, date.
  • Updates the description of password-policy for accuracy.
  • Updates crypto-list in sdes-profile to clarify platform-specific values.
  • Adds missing parameters in http-profile, all parameters now include accurate min/max information.
  • Removes the ssh-password command. This command was deprecated and replaced with the local-accounts command in a previous release.
  • Adds the refer-fail-resume parameter to realm-config.
June 2026
  • Clarifies that changing the log level for some tasks is not RTC-supported in log-level command and system-config topic.
  • In the certificate-record configuration element, adds values supported for compatibility with imported certificate records in key-usage, extended-key-usage, and digest-algor.
  • Adds topics for error-announcement-map and error-announcement-map > entries configuration elements, adds announcement-on-error parameter in realm-config and sip-interface.
  • Adds that fiber interfaces do not support manual speed/duplex configuration
  • Updated local-error values for local-response-map entries.
  • In the ping-response parameter in the session-agent topic, adds note about response in offline mode.
August 2026
  • Updates the media-profile, average-rate-limit's minimum acceptable value.
  • Adds or updates the following for S-Cz10.0p9 features:
    • Updates the resource-type parameter in resource-monitor-profile with new resources.
    • Adds the fax-conti-sess-ext parameter in sip-interface.
    • Adds the retry-after-enhancement parameter in sip-config.
    • Updates the rtcp-generate parameter in rtcp-policy with new values.
September 2026 In system-config > collect > push-receiver, removes the auth-type and port parameters, and references to them in the password parameter. The related feature has been removed.