4 Known Issues
The following tables list the known issues in version 9.1 and unresolved known issues from previous releases. You can reference known issues by ID number and you can identify the issue, any workaround, when the issue was found, and when it was fixed using this table. Issues not carried forward in this table from previous Release Notes are not relevant to this release. You can review delivery information, including defect fixes in this release's Build Notes.
Known Issues
The following table lists unresolved Known Issues.
| ID | Description | Severity | Found In |
|---|---|---|---|
| 30783830 | SD-WAN Edge does not support GRE wrapped packets that are fragmented before being encapsulated into the GRE wrapper. | 2 | 8.1.0.2.0 |
| 34027399 | D2000 core dump causing Active/Active HA. | 2 | 9.1.0.1.0 |
| 34043683 | Switching management IP between DHCP and static is failing. | 3 | 8.2.1.9.0 |
| 34001818 | In the conduit basic settings, there is a "Disable Reverse Also" option, but there is no "Enable Reverse Also" option. | 2 | 8.2.1.9.0 |
| 33935424 | Error message EC261 about duplic WAN link names displays, when no error exists. | 3 | 9.1.0.1.0 |
| 33271781 | When the Internet service at a site goes down, the routes for that service will still be exported out to the client sites by way of WAN to WAN forwarding. The route still shows as reachable on the client site and traffic is not directed to an alternate path. | 2 | 8.2.1.5.1 |
| 33470576 | NCN Drops Conduits to all Sites and Shows Deadman timeouts. | 2 | 8.2.1.7.0 |
| 33909829 | Unable to Perform Basic Web UI Functions and Unable to Import Current Running Configuration to Editor. | 2 | 9.1.0.1.0 |
| 33847288 | NCN does not pick up the correct public IP address
with the autodetect public IP address enabled.
Workaround: Statically configure the public IP address. |
2 | 8.2.1.6.1 |
| 33775603 | The client site and NCN temporarily detect a configuration mismatch, but no configuration changes occurred at either site. | 3 | 8.2.1.5.1 |
| 33585765 | D2000 Interface 9 and 10 do not work after trying
different SFP+ transceivers, cabling, and peer devices.
Workaround: Upgrade the firmware of the SFP+ interfaces. |
3 | 8.2.1.7.0 |
| 33702817 | Some of the log files like dynamic_routing.log are
not recreated after deleting them.
Workaround: Restart the BIRD process which recreates the dynamic_routing.log. |
3 | 8.2.1.7.0 |
| 33789553 | Packet Captures on Trunked Interfaces do not work correctly when applying a filter. | 3 | 9.1.1.0.0 |
| 33391550 | When DNS Proxy is enabled, TCP based DNS request and response can cause a service impacting core dump. Workaround: Turn off DNS proxy. | 3 | 8.2.1.6.1 |
| 33391550 | When the DNS Proxy is enabled, TCP based DNS
requests and responses can cause a service impacting core dump.
Workaround: Turn off DNS proxy. |
3 | 8.2.1.6.1 |
| 33541888 | Edge is sending a NAS-IP-Address of 127.0.0.1 instead of its real IP address. | 3 | 9.0.1.2.0 |
| 33618327 | All HTTP and HTTPS traffic between certain sites and the NCN was significantly degraded. A forced HA swap improves the performance. | 3 | 8.2.1.7.0 |
| 33286234 | All HTTP and HTTPS traffic between certain sites and the NCN was significantly degraded. A forced HA swap improves the performance. | 3 | 8.2.1.7.0 |
| 33286234 | Munin logging is not included in diagnostics. | 4 | 8.2.1.7.0 |
| 33806764 | Performance reports show incorrect Information. | 4 | 8.2.1.8.0 |
Resolved Issues
The following table lists previous Known Issues that are resolved.
| ID | Description | Found In | Fixed In |
|---|---|---|---|
| 33359757 | Problem statement: A service impacting core dump may occur in a client site when a configuration change is applied in NCN. | 9.1.0.0.0 | 9.1.1.0.0 |
| 33416733 |
Problem statement:You cannot add multiple WAN links with the DHCP Virtual Interface. Workaround: 1.Add a Virtual Interface with Static IP address. 2.Create a WAN link using this Virtual Interface. 3.Edit the Virtual Interface as DHCP. The WAN link will be automatically converted to a WAN link with the DHCP Virtual Interface. |
9.1.0.0.0 | 9.1.1.0.0 |
| 33427548 | Problem statement: Support migration of controller functionality between SD-WAN Edge NCN and OSOC (Oracle SD-WAN Orchestration Cloud service). | N/A | 9.1.0.1.0 |
| 32807705 | Problem statement: Virtual Interfaces with the same routing domains, even having different names are considered as same, so does not show one of them. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33295659 | Problem statement: A service impacting core dump may occur on VT800 when performing network reboot. | 9.1.0.1.0 | 9.1.0.1.0 |
| 33136899 | Problem statement: The Interface List view does not refresh the total number of Ethernet Ports based on the site selection change, resulting in wrong data displayed. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33136867 | Problem statement: Downloading a configuration file from the 8.2 release with Import Filter with Service Type as Local and importing it into 9.1 release changes the Service Type to Passthrough. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33308843 | Problem statement: BGP may restart during a configuration update causing the network to go down. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32982732 | Problem statement: The init.log file grows to a very large size. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32962206 | Problem statement: 1. Service impacting memory dump or system slowness may be observed due to stress on available system memory. 2. A service impacting memory dump may occur during a configuration update. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33193092 | Problem statement: Dynamic Routing does not restart from GUI or command line. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33239642 | Problem statement: You may not be able to install the zip package containing software and configuration. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33236355 | Problem statement: You may not be able to use SSH to the edge device using radius credentials. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32724191 | Problem statement: The database clean script is unable to clean the stats database. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32975725 | Problem statement: The priority for User Defined Application compared to Oracle Defined Application was not given, leading to flows matching the wrong application. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32724305 | Problem statement: Slowness reported in appliance after configuration update. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32723200 | Problem statement: In the Performance Reports, whenever Active WAN Link goes down, so does the Last Resort WAN Link. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32724823 | Problem statement: Not able to load the configuration file extracted from diagnostics when there was an Identity certificate included in the configuration. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33215349 | Problem statement: The browser continues to use the older HTTPS certificate after uploading the new certificate and key. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32955491 | Problem statement: Management Packet Capture Option was missing as for the hardware model E100 and E50 we were not considering MGT attribute. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33294543 | Problem statement: You may not be able to create a DHCP subnet using the configuration editor. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33344915 | Problem statement: The database clean script is unable to clean the stats database. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33312790 | Problem statement: You may not be able to add a global firewall policy template from the web UI. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32729388 | Problem statement: The hard disk usage alert continues to display in the UI after addressing the issue. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33381683 | Problem statement: 1. You may observe poor performance for traffic going from NCN to client sites. 2. A service impacting memory dump may occur during change management. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32241462 |
Problem statement: On the QoS, Rules statistics page the table column headers are shifted right by one column. Workaround: Read the data in the table by associating the data in the column to one header to left. |
9.0.1.1.0 | 9.1.0.0.0 |
| 32240517 |
Problem statement: Instead of showing the application name, the application index is displayed on the filter policies statistics page. Workaround: Determine the application name from the application index on the ,Firewall Filter Policies page. Go to Configuration,View Configuration, Firewall,Firewall Filter Policies page. |
9.0.1.1.0 | 9.1.0.0.0 |
Resolved Issues
The following table provides a list of previous Known Issues that are resolved.
| ID | Description | Found In | Fixed In |
|---|---|---|---|
| 34025694 | init.log filling up with snmpd status messages. | 9.1.1.1.0 | 9.1.1.2.0 |
| 33788673 | GUI does not set Swap when importing cfg of swapped Pri-Sec HA. | 9.1.1.0.0 | 9.1.1.2.0 |
| 33792919 | DHCP clients cannot acquire IP address during lease renewal since the request is forwarded to an incorrect DHCP server. | 9.1.0.1.0 | 9.1.1.1.1 |
| 33934012 | Service impacting core dump can occur when DNS proxy is configured and DNS over TCP is used by the customer. | 9.1.1.0.0 | 9.1.1.2.0 |
| 33898137 | Return internet flows are being dropped unexpectedly. | 9.1.1.0.0 | 9.1.1.2.0 |
| 33894232 | Customer unable to configure IPSec tunnel for Internet and Intranet services if their WAN Gateway router is running in a HSRP setup. | 9.1.1.0.0 | 9.1.1.2.0 |
| 32372402 | Request to allow for up to 8 standby WAN links. | 8.2.1.4.0 | 9.1.1.2.0 |
| 33450579 | Problem Statement: Repeated service impacting core dumps may occur resulting in service getting automatically disabled when High Availability is configured with bigger site name and virtual interface names. | 9.1.0.0.0 | 9.1.1.1.0 |
| 33846288 | Problem Statement: Operation failed error reported on clicking Site, Advanced, Firewall in the configuration editor. | 9.1.0.1.0 | 9.1.1.1.0 |
| 33557280 | Problem Statement: Selected packet capture interface captures different interface in Troubleshoot, packet capture. | 9.1.0.1.0 | 9.1.1.1.0 |
| 33513838 | Problem Statement: Service impacting core dump may occur on a VT800 appliance. | 9.1.0.1.0 | 9.1.1.1.0 |
| 33367170 | Problem Statement: Log files may grow to a very large size due to log rotation not working as expected. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33522570 | Problem Statement: Client Conduit does not establish after a Configuration change occurs while the Client is down. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33526722 | Problem Statement: Running diagnostics can cause the NCN active HA peer to failover and become the standby HA peer. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33575873 | Problem Statement: Removal of the PA service chain can result in high disk usage which may cause service to clean and restart. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33574101 | Problem Statement: The ingress or egress packet size may be different than the configured MTU size. |
9.1.1.0.0
|
9.1.1.1.0
|
| 33767386 | Problem Statement: Dynamic Conduit may form only in one direction in a high traffic scenario. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33557280 | Problem Statement: Selected Packet Capture Interfaces Capture Different Interface. | 9.1.0.1.0 | 9.1.1.1.0 |
| 33791833 | Problem Statement: You will be unable to receive email alerts. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33596943 | Problem Statement: You will be unable to push configuration exported from configuration editor to 'ready to stage' screen. Configuration exported from configuration editor to change management cannot be pushed to ready for staged if another configuration is already ready to be staged. | 9.1.0.1.0 | 9.1.1.1.0 |
| 33765021 | Problem Statement: On importing a configuration, the virtual interface name and associated routing domain value is not displayed as per the configuration in OSPF, BGP, DHCP Relay screens in the configuration editor. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33577919 | Problem Statement: Cannot remove Config Audit Errors after Site Deletion Due to Lingering Parameters. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33789235 | Problem Statement: You may be unable to import TALRI-MIB file due to some syntax errors in the file. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33659824 | Problem Statement: Deleting a route filter removes the wrong filter from the configuration. | 9.0.1.2.0 | 9.1.1.1.0 |
| 33821307 | Problem Statement: The packet capture filter does not accept the host filter. | 9.1.0.1.0 | 9.1.1.1.0 |
| 33585945 | Problem Statement: SNMP v3 test command options are incorrect when encryption NONE is chosen. | 9.1.0.1.0 | 9.1.1.1.0 |
| 33833518 | Problem Statement: Ethernet numbers incorrect in packet capture drop-down selection. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33718417 | Problem Statement: SNMP commands can be executed even though it is disabled from the UI. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33797147 | Problem Statement: SMTP Server Hostname is not permitted when setting up email alerts. | 9.1.1.0.0 | 9.1.1.1.0 |
| 33359757 |
Problem Statement: A service impacting core dump may occur in a client site when a configuration change is applied in NCN. |
9.1.0.0.0 | 9.1.1.0.0 |
| 33416733 |
Problem Statement: You cannot add multiple WAN links with the DHCP Virtual Interface. Workaround: 1. Add a Virtual Interface with Static IP. 2. Create a WAN link using this Virtual Interface. 3. Edit the Virtual Interface as DHCP. The WAN link automatically converts to a WAN link with DHCP Virtual Interface. |
9.1.0.0.0 | 9.1.1.0.0 |
| 33427548 (Enhancement Request) | Problem Statement: Support for migration of controller functionality between SD-WAN Edge NCN and OSOC (Oracle SD-WAN Orchestration Cloud service). | 9.1.0.1.0 | |
| 32807705 | Problem Statement: Virtual Interfaces with the same routing domains, even with different names are considered as the same, so it will not show one of them. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33295659 | Problem Statement: A service impacting core dump may occur on VT800 when performing network reboot. | 9.1.0.1.0 | 9.1.0.1.0 |
| 33136899 | Problem Statement: The Interface List view does not refresh the total number of Ethernet Ports based on the site selection change, resulting in wrong data displayed. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33136867 | Problem Statement: Downloading a configuration file from the 8.2 release having Import Filter with Service Type as Local and importing it into 9.1 release changes the Service Type to Passthrough. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33308843 | Problem Statement: BGP may restart during a configuration update causing the network to go down. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32982732 | Problem Statement: The init.log file grows to a very large size. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32962206 |
Problem Statement: 1. A service impacting memory dump or system slowness may be observed due to stress on available system memory. 2. A service impacting memory dump may occur during a configuration update. |
9.1.0.0.0 | 9.1.0.1.0 |
| 33193092 | Problem Statement: Dynamic Routing does not restart from the GUI or the command line. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33239642 | Problem Statement: You may not be able to install the zip package containing software and configuration. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33236355 | Problem Statement: You may not be able to use SSH to connect to the edge device using radius credentials. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32724191 | Problem Statement: The database clean script is unable to clean the stats database. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32975725 | Problem Statement: The priority for User Defined Application compared to Oracle Defined Application was not given, leading to flows matching the wrong application. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32724305 | Problem Statement: Slowness reported in appliance after configuration update. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32723200 | Problem Statement: In the Performance Reports, whenever the Active WAN Link goes down, so does the Last Resort WAN Link. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32724823 | Problem Statement: Unable to load the configuration file extracted from diagnostics when there was an identity certificate included in the configuration. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33215349 | Problem Statement: The browser continues to use the older HTTPS certificate even after uploading the new certificate and key. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32955491 | Problem Statement: The Management Packet Capture Option was missing hardware models E100 and E50 which did not consider the MGT attribute. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33294543 | Problem Statement: You may not be able to create a DHCP subnet using the configuration editor. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33344915 | Problem Statement: The database clean script is unable to clean the stats database. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33312790 | Problem Statement: You may not be able to add a global firewall policy template from the Web UI. | 9.1.0.0.0 | 9.1.0.1.0 |
| 32729388 | Problem Statement: The hard disk usage alert continues to display in the UI after addressing the issue. | 9.1.0.0.0 | 9.1.0.1.0 |
| 33381683 |
Problem Statement: 1. You may observe poor performance for traffic going from NCN to client sites. 2. A service impacting memory dump may occur during change management. |
9.1.0.0.0 | 9.1.0.0.1 |
| 32241462 |
Problem Statement: On the QoS, Rules Statistics page the table column headers are shifted right by one column. Workaround: Read the data in the table by associating the data in the column to one header to left. |
9.0.1.1.0 | 9.1.0.0.0 |
| 32240517 |
Problem Statement: Instead of showing the application name, the filter policies statistics page displays the application index. Workaround: Determine the application name from the application index. Go to Configuration, View, Configuration, Firewall, Firewall Filter Policies page. |
9.0.1.1.0 | 9.1.0.0.0 |