A Pre-defined Scripts
This appendix describes the pre-defined scripts that are supplied with Oracle Communications IP Service Activator.
Save to NVRAM
The NVRAM.py script copies the Cisco running configuration to startup configuration (NVRAM). This is particularly useful if a number of changes have taken place during the current run period of the system and ensures these changes are saved for any future restarts.
Device Driver
Cisco IOS device driver
Objects Applied To
Script Type = Device
Device Role = Any Role
Scheduling Requirements
Installed = After configuration changes
Frequency = Once only
Install on restart = False
Variables Required
N/A
Commands Applied During Install
copy running-config startup-config
Commands Applied During Remove
N/A
Add VLAN to CatOS
The CatosAddVlna.py script adds a VLAN to a CatOS switch.
Device Driver
CatOS script driver
Objects Applied To
Script Type = Device
Device Role = Any Role
Scheduling Requirements
Installed = After configuration changes
Frequency = Repeatedly
Install on restart = False
Variables Required
newVlanNum
newVlanName
Commands Applied During Install
copy running-config startup-config
Commands Applied During Remove
N/A
Force a FastStart Mode Exit for Cisco Devices
The NullCiscoScript.py script forces Cisco devices to exit from the FastStart mode.
Device Driver
Cisco IOS device driver
Objects Applied To
Script Type = Device
Device Role = Any Role
Scheduling Requirements
Installed = After configuration changes
Frequency = Once only
Install on restart = False
Variables Required
N/A
Commands Applied During Install
N/A
Commands Applied During Remove
N/A