1. Administrator's Guide
  2. Applicable Platforms
  3. Oracle Server X9-2 Platform Preparation
  4. Install the Software on the Oracle Server X9-2

Install the Software on the Oracle Server X9-2

ECB requires software installation when deployed on the Oracle Server X9-2.

Software installation to Oracle Server X9-2 includes the following high-level steps:

  1. Insert your installation media into the USB slot or connect the ISO image by way of Oracle Integrated Lights Out Manager (ILOM) virtual media.
  2. Power on the Oracle Server X9-2.
  3. Observe the startup process, and press F8 to enter the boot menu when it becomes available.
  4. Select the bootable USB or ISO setting.

    Note:

    You may need to scroll through the list to reach the ISO setting.

    Note:

    If you are performing ISO installation for the 2nd, or the 3rd time onwards (not the 1st time.)
    1. Press 'e' when the screen prompts.
    2. Type factory-default at the end of the line.
    3. Press Ctrl-x.
  5. Save and exit the boot menu.
    The Oracle Server X9-2 starts the ECB installation.
  6. Change the Console Device boot parameter to COM1 during installation. If you miss this change during the installation, power on and off the device or catch the boot parameter interrupt and change as soon as possible.
  7. Remove the USB media when prompted by the Oracle Server X9-2.
  8. Allow the Oracle Server X9-2 complete the installation process and boot to the newly installed ECB software.