Running Setup

Initialize the System

The Oracle Enterprise Communications Broker (OECB) requires initialization upon the first startup. You can initialize the OECB from the GUI.

Caution:

If you ever need to initialize the system again, be aware that all configuration is lost during initialization and that the system reboots when you click Complete.

If you plan to configure High Availability (HA), note that you use the Set Initial Configuration wizard to configure the primary OECB first. Upon successful configuration of the primary, HA operations begin as soon as you complete the Set Initial Configuration on the secondary OECB.

To initialize the system, navigate to the Configuration screen and select the Set initial configuration wizard from the wizard drop-down list.

The system displays the Configure system dialog.

On the Configure System dialog, do the following:

High Availability mode

Select one of the following modes:

standalone—You want to deploy a single OECB.
high availability—You want to deploy OECBs in pairs, connecting them together and configuring one as primary and the other as a secondary.

Unique target name of this ECB

Type the name of this system. This setting has an operational impact on your high availability configuration.

Management interface IP address

Type the IP address to use for accessing the Web GUI, and press Enter.

Management interface subnet mask

Type subnet mask to use for accessing the Web GUI, and press Enter.

Management interface gateway IP address

Type the IP address to use for reaching this network's gateway, and press Enter.

SIP interface VLAN ID

Type the VLAN ID, if any, required for operation on the network of your SIP interface. Range: 0-4095

SIP interface IP address

Type the IP address to use for accessing the SIP interface, and press Enter. This step is required.

SIP interface subnet mask

Type subnet mask to use for accessing the SIP interface, and press Enter.

Setup system time zone

Select one of the following settings:

Yes—to set the system time zone.
No-to skip setting the system time zone.

System time zone

Select your time zone from the drop-down list.

Session capacity

Type the number of sessions you purchased for this OECB.

Click Complete to proceed with deleting the existing configuration, setting the values in your wizard, and rebooting your OECB.