8 IP Tables
This chapter describes IP table data reports.
8.1 IPLINK (rtrv-ip-lnk)
The output content for rtrv-ip-lnk lists all the attributes of the IPLINK table.
Table 8-1 Output Content for rtrv-ip-lnk
| Field Name | Description | Data |
|---|---|---|
| LOC | The card location | Integer |
| PORT | The Ethernet interface port ID, A or B | ASCII text |
| IPADDR | The IP address for the specified port | ASCII text |
| SUBMASK | The subnet mask of the IP interface | ASCII text |
| DUPLEX | The mode of operation of the interface, HALF or FULL | ASCII text |
| SPEED | The bandwidth for the interface in megabits per second, 10 or 100 | Integer |
| MACTYPE | The Media Access Control type of the interface | ASCII text |
| AUTO | Whether or not to automatically determine duplex and speed | ASCII text |
| MCAST | Multicast control; enables or disables multicast support for the interface | ASCII text |
Example Output File: iplink_20070515_1504
Abbreviated example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"<cr><lf>
"tekelecstp","EAGLE 44.0.0-64.3.1","482","2011-05-10","11:48:23","2011-05-11","10:29:49","India Standard Time","IP LINK","8","512","2%"<cr><lf>
“LOC","PORT","IPADDR","SUBMASK","DUPLEX","SPEED","MACTYPE","AUTO","MCAST"<cr><lf>
1113,"A","---------------","---------------","HALF","10","DIX","NO","NO"<cr><lf>
1115,"A","---------------","---------------","HALF","10","DIX","NO","NO” <cr><lf>
1211,"A","150.123.123.123","255.255.255.0","HALF",”10”,"DIX","NO","YES"<cr><lf>
1211,"B","150.123.123.124","255.255.255.0","HALF",”10”,"DIX","NO","NO"<cr><lf>
1213,"A","150.123.123.125","255.255.255.0","----",”---“,"DIX","YES","NO"<cr><lf>
1213,"B","150.123.123.126","255.255.255.0","----",”---“,"DIX","YES","NO"<cr><lf>
1215,"A","150.123.123.127","255.255.255.0","FULL",”100”,"DIX","NO","YES"<cr><lf>
1215,"B","150.123.123.128","255.255.255.0","FULL",”100”,"DIX","NO"<cr><lf>
Maximum File Size
System header + Report header + Report data
250 + 75 + 512 x 86 = 44,357 bytes
8.2 IPHOST (rtrv-ip-host)
The output content for rtrv-ip-host lists
all the attributes of the IPHOST table.
Table 8-2 Output Content for rtrv-ip-host
| Field Name | Description | Data |
|---|---|---|
| LOCAL IPADDR | The IP address associated with the local hostname. | ASCII text |
| LOCAL HOST | The logical name of the device associated with the indicated local IP address. | ASCII text |
| LOCAL REALM | Realm associated with the local diameter hostname. Diameter hostname are those hostnames specified by associations with adapter = DIAM. | ASCII text |
| REMOTE IPADDR | The IP address associated with the remote hostname. | ASCII text |
| REMOTE HOST | The logical name of the device associated with the indicated remote IP address. | ASCII text |
| REMOTE REALM | Realm associated with the remote diameter hostname. Diameter hostname are those hostnames specified by associations with adapter = DIAM. | ASCII text |
Example Output File: iphost_20130830_1504
Abbreviated example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"<cr><lf>
"tekelecstp","EAGLE 45.1.0-64.74.1","482","2013-08-30","11:48:23","2013-08-30","10:29:49","India Standard Time","IPHOST","58","4096","1%"<cr><lf>
“LOCAL IPADDR”,”LOCAL HOST”,”LOCAL REALM” <cr><lf>
“192.168.63.51”,”tekelecdmz11”,”Aricent.com” <cr><lf>
“REMOTE IPADDR”,”REMOTE HOST”,”REMOTE REALM” <cr><lf>
“192.168.63.235”,” tekelecdmz21.com”,”” <cr><lf>
“127.1.1.1”,”tekelec0.com”,” ” <cr><lf>
"192.168.63.235","tekelecdmz21.com",” ”<cr><lf>
"192.168.45.1","a.com",”temp.com”<cr><lf>
"192.168.45.2","b.com",” ”<cr><lf>
"192.168.45.3","c.com",” ”<cr><lf>
"192.168.45.4","d.com",” ”<cr><lf>
"192.168.45.5","e.com",” ”<cr><lf>
"192.168.45.6","f.com",” ”<cr><lf>
"192.168.45.7","g.com",” ”<cr><lf>
"192.168.45.8","h.com",” ”<cr><lf>
"192.168.45.9","i.com",” ”<cr><lf>
"192.168.46.3","c.cam",” ”<cr><lf>
"192.168.46.4","d.cam",” ”<cr><lf>
"192.168.46.5","e.cam",” ”<cr><lf>
"192.168.46.6","f.cam",” ”<cr><lf>
"192.168.46.7","g.cam",”lmp.com ”<cr><lf>
"192.168.46.8","h.cam",” ”<cr><lf>
"192.168.46.9","i.cam",” ”<cr><lf>
"192.168.46.1","j.cam",” ”<cr><lf>
"192.168.46.2","k.cam",” ”<cr><lf>
"192.168.47.3","c.cbm",” ”<cr><lf>
"192.168.47.4","d.cbm",” ”<cr><lf>
"192.168.47.5","e.cbm",” ”<cr><lf>
"192.168.47.6","f.cbm",” ”<cr><lf>
"192.168.47.7","g.cbm",” ”<cr><lf>
"192.168.47.8","h.cbm",” ”<cr><lf>
"192.168.47.9","i.cbm",” ”<cr><lf>
"192.168.47.1","j.cbm",” ”<cr><lf>
"192.168.47.2","k.cbm",” ”<cr><lf>
"192.168.48.3","c.ccm",” ”<cr><lf>
"192.168.48.4","d.ccm",” ”<cr><lf>
"192.168.48.5","e.ccm",” ”<cr><lf>
"192.168.48.6","f.ccm",” ”<cr><lf>
"192.168.48.7","g.ccm",” ”<cr><lf>
"192.168.48.8","h.ccm",” ”<cr><lf>
"192.168.48.9","i.ccm",” ”<cr><lf>
"192.168.48.1","j.ccm",” ”<cr><lf>
"192.168.48.2","k.ccm",” ”<cr><lf>
"192.168.49.3","c.cdm",” ”<cr><lf>
"192.168.49.4","d.cdm",” ”<cr><lf>
"192.168.49.5","e.cdm",” ”<cr><lf>
"192.168.49.6","f.cdm",” ”<cr><lf>
"192.168.49.7","g.cdm",” ”<cr><lf>
"192.168.49.8","h.cdm",” ”<cr><lf>
"192.168.49.9","i.cdm",” ”<cr><lf>
"192.168.49.1","j.cdm",” ”<cr><lf>
"192.168.49.2","k.cdm",” ”<cr><lf>
"192.168.40.3","c.cem",” ”<cr><lf>
"192.168.40.4","d",”xyz.com ”<cr><lf>
"192.168.40.5","e.cem",” ”<cr><lf>
"192.168.40.6","f.cem",” ”<cr><lf>
"192.168.40.7","g.cem",” ”<cr><lf>
"192.168.40.8","h.cem",”tekelec.com”<cr><lf>
"192.168.40.9","i.cem",” ”<cr><lf>
"192.168.40.1","j.cem",” ”<cr><lf>
"192.168.40.2","k.cem",” ”<cr><lf>
Example: iphost_20191218_2022.csv
Abbreviated example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"e1111201","EAGLE 47.0.0.0.0-78.8.0","798187","2019-12-18","20:22:18","2021-03-18","02:11:11","Eastern Standard Time","IPHOST","31","4096","1%"
"LOCAL IPADDR","LOCAL HOST","LOCAL REALM"
"10.75.146.124","meas.1113a.t100",""
"10.75.146.125","meas.1115a.t100",""
"10.75.146.7","host01",""
"10.75.146.16","eaglehost1",""
"10.254.107.5","red1",""
"10.254.102.81","eir3315","s13eir.com"
"10.254.103.45","sip2201b",""
"10.254.101.7","host03",""
"10.254.101.12","host05",""
"10.254.102.17","eir1101","s13eir.com"
"10.254.103.4","eir1101c","s13eir.com"
"REMOTE IPADDR","REMOTE HOST","REMOTE REALM"
"46.2.0.1","eaglecfg",""
"0.0.46.0","eaglerls",""
"10.254.104.12","ipsgi5107b.stpa030","dummy.tekelec.com"
"10.75.137.31","meatnew",""
"10.254.104.35","ipsgi1102b.stpa030","dummy.tekelec.com"
"10.254.103.73","ipsgi5101a.stpa030","dummy.tekelec.com"
"10.254.104.39","ipsgi5101b.stpa030","dummy.tekelec.com"
"10.75.146.193","host02",""
"10.254.103.16","ipsgi2303a.stpb080","dummy.tekelec.com"
"10.254.107.227","red2",""
"10.254.104.10","ipsgi2305a.stpb080","dummy.tekelec.com"
"10.254.103.17","ipsgi2311a.stpb080","dummy.tekelec.com"
"10.254.104.11","ipsgi2313a.stpb080","dummy.tekelec.com"
"10.196.218.77","seast4",""
"10.75.136.127","meat",""
"10.75.146.21","h1106",""
"10.254.101.73","host04",""
"10.254.101.52","host06",""
"10.254.102.96","mme01","tekelec.com"
"10.254.103.78","mme01c","tekelec.com"
Maximum File Size
System header + Report header + Report data
250 + 43 + 4096 x 32 = 131,365 bytes
8.3 IPCARD (rtrv-ip-card)
The output content for rtrv-ip-card lists all the attributes of the IPCARD table.
Table 8-3 Output Content for rtrv-ip-card
| Field Name | Description | Data |
|---|---|---|
| LOC | The card location | Integer |
| SRCHORDR | The host table search order | ASCII text |
| DNSA | The IP address of domain server A | ASCII text |
| DNSB | The IP address of domain server B | ASCII text |
| DEFROUTER | The IP address for the default router | ASCII text |
| DOMAIN | The Domain name of the domain server | ASCII text |
| SCTPCSUM | The SCTP checksum algorithm type | ASCII text |
| BPIPADDR | The bonded port IP address | ASCII text |
| BPSUBMASK | The bonded port IP submask | ASCII text |
| DSCP | The DSCP value | Integer |
Example Output File: ipcard_20070515_1504
Abbreviated example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"<cr><lf>
"tekelecstp","EAGLE 43.0.0-63.51.0","482","2011-02-12","11:48:23","2011-02-14","10:29:49","India Standard Time","IPCARD","5","256","2%"<cr><lf>
"LOC","SRCHORDR,DNSA,DNSB,DEFROUTER,DOMAIN,SCTPCSUM,BPIPADDR,BPSUBMASK,DSCP"<cr><lf>
1105,"LOCAL”,”---------------“,”---------------“,”---------------“,”---------------“,”crc32c”,”192.168.124.2”,”255.255.255.0",“---“<cr><lf>
1107,"LOCAL”,”---------------“,”---------------“,”---------------“,”---------------“,crc32c”,”192.168.124.4”,”255.255.255.0",“---“<cr><lf>
1111,"LOCAL”,”---------------“,”---------------“,”---------------“,”---------------“,”crc32c”,”192.168.124.3”,”255.255.255.0",“---“<cr><lf>
1113,"SRVR","---------------","---------------","---------------","---------------",
"crc32c","---------------","---------------",“---“<cr><lf>
1115,"SRVR","---------------","---------------","---------------","---------------",
"crc32c","---------------","---------------",“---“<cr><lf>
Maximum File Size
System header + Report header + Report data
250 + 76 + 256 x 94 = 24,390 bytes
8.4 IPAPSOCK (rtrv-assoc)
The output content for rtrv-assoc lists
all the attributes of the IPAPSOCK table.
Table 8-4 Output Content for rtrv-assoc
| Field Name | Description | Data |
|---|---|---|
| ANAME | Name assigned to this association (in IPAPSOCK table). | ASCII text |
| LOC | The card location. | Integer |
| IPLINK PORT | Port A or B. | ASCII text |
| LINK | The signaling link for this association. | ASCII text |
| ADAPTER | The adapter layer for this association. | ASCII text |
| VER | Version. This parameter specifies the M2PA version supported by the association. | ASCII text |
| LHOST | The local host name as defined in the IP Host table. | ASCII text |
| ALHOST | Name of alternate local host. When specified, this parameter configures the SCTP association as a multi-homed endpoint. | ASCII text |
| RHOST | Name of remote host as defined in the IP host table. | ASCII text |
| ARHOST | Name of alternate remote host. | ASCII text |
| LPORT | Local TCP port number. | ASCII text |
| RPORT | Remote TCP port number. | ASCII text |
| ISTRMS | SCTP inbound stream value. A 16-bit unsigned integer that defines the number of streams the sender allows the peer end to create in this association. | Integer |
| OSTRMS | SCTP outbound stream value. This parameter specifies the 16-bit unsigned integer that defines the number of streams the sender wants to create in this association. | Integer |
| BUFSIZE | Association buffer size in Kilobytes. | Integer |
| RMODE | Retransmission mode. This parameter specifies the retransmission policy used when packet loss is detected. | ASCII text |
| RMIN | Minimum retransmission timeout. This parameter specifies the minimum value of the calculated retransmission timeout in milliseconds. | Integer |
| RMAX | Maximum retransmission timeout. This parameter specifies the maximum value of the calculated retransmission timeout in milliseconds. | Integer |
| RTIMES | Maximum retransmission retries. This parameter specifies the number of times a data retransmission will occur before closing the association. | Integer |
| CWMIN | Minimum congestion window. This parameter specifies the minimum and initial sizes, in bytes, of the association's congestion window. | Integer |
| UAPS | This column contains the UAPS value. | Integer |
| OPEN | Socket open capability. | ASCII text |
| ALW | Socket allowed for ss7 traffic. | ASCII text |
| RTXTHR | Retransmission threshold. This parameter specifies the value of the retransmission threshold to tune the IP Connection Excess Retransmits alarm. | Integer |
| RHOSTVAL | Remote host value. | ASCII text |
| HBTIMER | Heartbeat Timer. This parameter specifies the value of the heartbeat timer in milliseconds for the association. | Integer |
| M2PATSET | This column contains M2PATSET when ADAPTER Layer is M2PA. | Integer |
Example Output File: ipapsock_20130830_1504
The following example shows output for rtrv-assoc:display=all
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"<cr><lf>
"eagle2","EAGLE 45.1.0-64.74.1","108","2013-08-30","01:48:18","2013-08-30","15:49:52","India Standard Time","IPAPSOCK","17","4000","1%"<cr><lf>
"ANAME","LOC","IPLINK PORT","LINK","ADAPTER","VER","LHOST","ALHOST","RHOST","ARHOST","LPORT","RPORT","ISTRMS","OSTRMS","BUFSIZE","RMODE","RMIN","RMAX","RTIMES","CWMIN","UAPS","OPEN","ALW","RTXTHR","RHOSTVAL","HBTIMER",”M2PATSET”<cr><lf>
"a456",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a457",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a458",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a459",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a460",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a461",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a462",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a463",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a464",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a465",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a466",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a467",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a468",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a469",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
"a470",1211,"A","A ","M3UA","M3UA RFC","tekelecdmz13.com","---","---","---","---","---",2,2,16,"LIN",120,800,10,3000,10,"NO","NO",0,"RELAXED",500,”---”<cr><lf>
“as11”,1111,”A”,”A “,”M2PA”,”M2PA RFC”,”tekelecdmz01.com”,”---“,”---”,”---“,10011,10011, 2,2,200,LIN,120,800,10,3000,10,NO,NO,0,RELAXED,500,1<cr><lf>
“dia11”,1301,”B”,”- “,”DIAM”,”Diameter RFC”,”lhost1”,”---“,”rhost1”,”---“,10012,10012, 2,2,200,LIN,120,800,10,3000,10,YES,NO,0,RELAXED,500,1<cr><lf>
Example: ipapsock_20191218_2022.csv
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"e1111201","EAGLE 47.0.0.0.0-78.8.0","798187","2019-12-18","20:22:18","2021-03-18","02:10:52","Eastern Standard Time","IPAPSOCK","3","4000","1%"
"ANAME","LOC","IPLINK PORT","LINK","ADAPTER","VER","LHOST","ALHOST","RHOST","ARHOST","LPORT","RPORT","ISTRMS","OSTRMS","BUFSIZE","RMODE","RMIN","RMAX","RTIMES","CWMIN","UAPS","OPEN","ALW","RTXTHR","RHOSTVAL","HBTIMER","M2PATSET"
"assoc5",1313,"A","A4 ","M3UA","M3UA RFC","eaglehost1","---","meatnew","---",2004,2004,2,2,200,"LIN",120,800,10,3000,10,"YES","NO",0,"RELAXED",500,"---"
"assoc6",1313,"A","A5 ","M3UA","M3UA RFC","eaglehost1","---","meatnew","---",2005,2005,2,2,200,"LIN",120,800,10,3000,10,"YES","NO",0,"RELAXED",500,"---"
"meat5211a4",1313,"B","B2 ","M3UA","M3UA RFC","red1","---","red2","---",5000,5000,2,2,200,"LIN",120,800,10,3000,10,"YES","NO",0,"RELAXED",500,"---"
Maximum File Size
System header + Report header + Report data
250 + 229 + 4000 x 342 = 1,368,479 bytes
8.5 IPOPTION (rtrv-appl-rtkey)
The output content for rtrv-appl-rtkey lists all the attributes of the IPOPTION table.
Table 8-5 Output Content for rtrv-appl-rtkey
| Field Name | Description | Data |
|---|---|---|
| RCONTEXT | The rcontext parameter is used to display the routing key with the specified routing context. | Integer |
| PC TYPE | Point code type. Possible values can be DPC, DPCI, DPCN, DPCN24, or DPCN16. | ASCII text |
| DPC | ANSI destination point code. | ASCII text |
| SI | Service indicator. | Integer |
| SSN | Subsystem number. | Integer |
| OPC | ANSI originating point code. | ASCII text |
| CICS | The start range of circuit identification codes assigned to the routing key. | Integer |
| CICE | The end range of circuit identification codes assigned to the routing key. | Integer |
| ADPTR | The adapter layer for this association. | ASCII text |
| TYPE/DUP | The type of routing key. | ASCII text |
| ASNAME | Application server (AS) name assigned to this routing key. | ASCII text |
Example Output File: applrtkey_20070515_1504
Note:
This output file name does not follow table name as for other commands. This has been explicitly done to satisfy requirements of PR 155136.Abbreviated example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"<cr><lf>
" tekelecstp","EAGLE 41.0.0-62.34.41","108","2002-01-01","01:48:18","2009-08-01","15:49:52","India Standard Time","APPL RTKEY","11","2500","1%"<cr><lf>
"RCONTEXT","PC TYPE","DPC","SI","SSN","OPC","CICS","CICE","ADPTR","TYPE","ASNAME",”DSCP”<cr><lf>
100,"DPC"," 008-008-008",3,5,"--------------","----------","----------","M3UA","FULL","a567"<cr><lf>
200,"DPC"," 008-005-009",5,"---"," 003-003-003",0,0,"M3UA","FULL","a569"<cr><lf>
444444,"DPC"," 008-009-008","**","***","**************","**********","**********","M3UA","PARTIAL","a564"<cr><lf>
4294967295,"DPCI"," 1-002-3",13,"---"," 4-011-1",4294967295,4294967295,"M3UA","FULL","a560"<cr><lf>
305419896,"DPCI"," 3-002-1",13,"---"," 4-011-1",305419896,305419896,"M3UA","FULL","a561"<cr><lf>
2271560481,"DPCI"," 3-003-1",13,"---"," 4-011-1",2271560481,2271560481,"M3UA","FULL","a562"<cr><lf>
0,"DPCN24"," 007-002-004",0,"---","--------------","----------","----------","M3UA","FULL","a568"<cr><lf>
102,"DPCN24"," 007-002-005","**","***","**************","**********","**********","M3UA","PARTIAL","a563"<cr><lf>
5555555,"DPC","*************",5,"---","**************","**********","**********","M3UA","PARTIAL","a565"<cr><lf>
1111104,"DPC","*************","**","***","**************","**********","**********","M3UA","DEFAULT","a566"<cr><lf>
111,"DPC","*************",0,"---","--------------","----------","----------","M3UA","PARTIAL","a570"<cr><lf>
J7 Point Code Support Example: applrtkey_20020304_2041.csv
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"eagle3","EAGLE 45.1.0-64.75.0","273","2002-03-04","20:41:11","2013-09-25","15:04:13","India Standard Time","APPL RTKEY","1","1000","1%"
"RCONTEXT","PC TYPE","DPC","SI","SSN","OPC","CICS","CICE","ADPTR","TYPE","ASNAME"
"----------","DPCN16"," 006-06-06",4,"---"," 007-07-07",500,1000,"M3UA","FULL","as161"
Note:
For ANAMEs (association name) associated with an ASNAME (app server), refer to the output of rtrv-as (IPAS (rtrv-as)).Note:
The maximum number of routing keys provisioned in the rtkey table is controlled by the srkq parameter of thechg-sg-opts command.
Maximum File Size
For a report of 1000 routing keys:
System header + Report header + Report data
250 + 88 + 1000 x 84 = 84,338 bytes
For a report of 2500 routing keys:
System header + Report header + Report data
250 + 88 + 2500 x 84 = 210,338 bytes
8.6 NTWRKAPP (rtrv-na)
The output content for rtrv-na lists all the attributes of the NTWRKAPP table.
Table 8-6 Output Content for rtrv-na
| Field Name | Description | Data |
|---|---|---|
| TYPE | Network appearance type being supported | ASCII text |
| GC | Group code | ASCII text |
| NA | Network appearance | Integer |
Example Output File: ntwrkapp_20070515_1504
Abbreviated example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"<cr><lf>
"tekelecstp","EAGLE 40.1.0-62.2.0","482","2008-12-24","11:48:23","2008-12-29","10:29:49","India Standard Time","NA","6","45","13%"<cr><lf>
"TYPE","GC","NA"<cr><lf>
"ANSI","--",0<cr><lf>
"ITUI","--",1<cr><lf>
"ITUN","aa",2<cr><lf>
"ITUN24","--",3<cr><lf>
"ITUIS","--",4<cr><lf>
"ITUNS","--",5<cr><lf>
J7 Point Code Support Example: ntwrkapp_20020304_2041.csv
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"eagle7","EAGLE 46.3.0.0.0-68.7.0","293","2016-01-25","22:27:58","2016-01-08","03:55:02","Eastern Standard Time","NA","0","46","0%"
"TYPE","GC","NA"
"ITUN16","--",1
Maximum File Size
System header + Report header + Report data
250 + 18 + 46 x 25 = 1,418 bytes
8.7 IPRTE (rtrv-ip-rte)
The output content for rtrv-ip-rte lists all the attributes of the IPRTE table.
Table 8-7 Output Content for rtrv-ip-rte
| Field Name | Description | Data |
|---|---|---|
| LOC | Card location | Integer |
| DEST | The IP address of a remote destination host or network | ASCII text |
| SUBMASK | Subnet mask | ASCII text |
| GTWY | The IP address assigned to the gateway router | ASCII text |
Example Output File: iprte_20120805_1504
Abbreviated example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"<cr><lf>
"tekelecstp","EAGLE 45.0.0-64.40.0","482","2012-08-04","11:48:23","2012-08-05","10:29:49","India Standard Time","IPRTE","5,"2048","1%"<cr><lf>
"LOC","DEST","SUBMASK","GTWY"<cr><lf>
1301,"128.252.10.5","255.255.255.255","140.188.13.33"<cr><lf>
1301,"128.252.0.0","255.255.0.0","140.188.13.34"<cr><lf>
1301,"150.10.1.1","255.255.255.255","140.190.15.3"<cr><lf>
1303,"192.168.10.1","255.255.255.255","150.190.15.23"<cr><lf>
1303,"192.168.0.0","255.255.0.0","150.190.15.24"<cr><lf>
Maximum File Size
System header + Report header + Report data
250 + 31 + 2048 x 38 = 78,105 bytes
8.8 SNMPOPTS (rtrv-snmpopts)
The output content for rtrv-snmpopts lists all the attributes of the SNMPOPTS table.
Table 8-8 Output Content for rtrv-snmpopts
| Field Name | Description | Data |
|---|---|---|
| OPTION | Option name | ASCII text |
| VALUE | Current value for the option | ASCII text |
Example Output File: snmpopts_20120614_1600.csv
Abbreviated example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"tekelecstp","EAGLE 44.0.0-64.33.0","2117","2012-06-14","16:00:22","2012-06-14","16:01:30","Eastern Standard Time","SNMP OPTIONS","3","3","100%"
"OPTION","VALUE"
"SNMPUIM","on"
"GETCOMM","eagle.get.pwd"
"SETCOMM","private"
Maximum File Size
System header + Report header + Report data
258 + 16 + 103 = 377 bytes
8.9 SNMPHOST (rtrv-snmp-host)
The output content for rtrv-snmp-host lists all the attributes of the SNMPHOST table.
Table 8-9 Output Content for rtrv-snmp-host
| Field Name | Description | Data |
|---|---|---|
| IPADDR | IP Address of SNMP Manager | ASCII text |
| HOST | Hostname of SNMP Manager | ASCII text |
| CMDPORT | Port which Agent will monitor for commands | Integer |
| TRAPPORT | Destination port for outgoing traps | Integer |
| HB | Heartbeat interval | Integer |
| TRAPCOMM | Trap community string | ASCII text |
Example Output File: snmphost_20120614_1600.csv
Example output file format:
"CLLI","SWREL","DBLEVEL","DBDATE","DBTIME","RPTDATE","RPTIME","TZ","RPTDATA","NUMENTRIES","MAXENTRIES","PCNTFULL"
"tekelecstp","EAGLE 44.0.0-64.33.0","2117","2012-06-14","16:00:22","2012-06-14","16:01:34","Eastern Standard Time","SNMP HOSTS","1","2","50%"
"IPADDR","HOST","CMDPORT","TRAPPORT","HB","TRAPCOMM"
"192.168.54.100","snmphost1",161,162,60,"public"
Maximum File Size
System header + Report header + Report data
258 + 52 + 104 = 414 bytes