1. EAGLE Commands User's Guide
  2. Pass-Through Commands
  3. soipdata

6.17 soipdata

This command is used to display the SOIP operational data captured for the last 24 hours.

Options

Options and option parameters that are underlined indicate that a value must be specified for that option or parameter.

-f

This option displays full operational data (all counts).

-s

This option displays the number of errors received with error type Bad Source.

-d

This option displays the number of of errors received with error type Bad Destination.

-v

This option displays the number of errors received with error type Bad Version.

-g

This option displays the number of Good Day messages received.

-e

This option displays the number of error messages sent (Sum of Bad Version, Bad Source and Bad Destination).

-u

This option displays the number of UPL messages received.

-t

This option displays the number of UPL messages transmitted.

-r

This option resets the specified error count.

-h

This option displays help for the command.

Example

soipdata –h

soipdata –f

soipdata –r

soipdata –u

Dependencies

None

Notes

None

Output

pass:loc=1305:cmd= “soipdata –h” 

    Usage: soipdata [[-f ] | [[-s] [-d] [-v] [-g] [–e] [-u] [-t] [-r][-h]]                   
                
    Options:
    -f  Display Full Operational data (all the counts)
    -s  Display number of SR-5129 Messages received with Bad Source
    -d  Display number of SR-5129 Messages received with Bad Destination
    -v  Display number of SR-5129 Messages received with Bad Version
    -g  Display number of Good Day Messages Received.
    -e  Display number of error messages sent (Sum of BadVersion, BadSource and BadDestination)
    -u  Display number of Number of UPL messages received
    -t   Display number of Number of UPL messages transmitted.
    -r   Reset the Specified Error Count          
    -h  display command help
pass:loc=1305:cmd=” soipdata –f” 

    SOIPDATA: SR-5129 Operational Data Report
                           
    Operational Data
    ______________________________________________________________________________
    reason                                                                count
    -----------------------------                                     -----------
    Message Recived with Bad Source                1
    Message Recived with Bad Destination        2
    Message Recived with Bad Version               0
    Number of Goodday Messages Received    1
    Number of Error Messages Sent                    10
    Number of UPL Messages Received             12000
    Number of UPL Messages Sent                      19000
pass:loc=1105:cmd=pass:loc=1305:cmd=”soipdata –r” 

    SOIPDATA  : All SOIP Operational data has been reset
pass:loc=1305:cmd=”soipdata –r –u” 

    SOIPDATA: Number of UPL Messages Received has been reset.
pass:loc=1305:cmd=”soipdata –u” 

    SOIP Operational Data
    _____________________________________________________________________________       
    reason                                                             count
    -----------------------------                                 -----------
    Number of UPL Messages Received           0
None.