5 Maintenance
This chapter describes the maintenance information that is available from the EAGLE for the Logging and Visualization feature. The information includes status, alarms (UAMs), and information messages (UIMs).
Alarms
UIMs
Refer to Unsolicited Alarms and Information Messages Reference for descriptions of EAGLE UIMs.
The following table lists the UIMs supported for the Logging and Visualization feature:
Table 5-1 Logging and Visualization UIMs
UIM # | Message Text | Output Group |
---|---|---|
1501 | Visualization connection terminated | LINK |
1502 | Visualization connection established | LINK |
The following table lists the UIM formats that are supported for visualization:
Table 5-2 UIM Format List for Visualization
UIM Format | Format Type |
---|---|
I12 | SCCP UDT |
I13 | SCCP INV TCAP |
I14 | SCCP Class |
I15 | SCCP Message |
I16 | SCCP CDPA |
I17 | SCCP Routing |
I18 | SCMG |
I38 | SCCP INV LENGTH |
I39 | SCCP INV TCAP W/ DATA |
I43 | SCCP CDPA for EGTT |
I44 | SCCP routing for EGTT |
I48 | GSM MAP Screening |
I91 | GTT ACTION |
I92 | MBR MSG |
I93 | TCAP CDPA |
Maintenance Commands
Debug Commands
The Commands User's Guide contains descriptions of debug commands that can be used in assessing and modifying system status and operation. Most of the debug commands are used only under the direction of Oracle support personnel.
Refer to Commands User's Guide for complete descriptions of the commands.
Status Reporting and Problem Identification
EAGLE commands can be used to obtain status and statistics for the EAGLE system, system devices including Service Module cards, local subsystems, and SCCP services.
Refer to Commands User's Guide for complete descriptions of the commands, including parameters and valid values, rules for using the commands correctly, and output examples.
Refer to Unsolicited Alarm and Information Messages Reference for descriptions and recovery procedures for UAMs and UIMs.