Table of Contents
- Title and Copyright Information
- My Oracle Support (MOS)
- Acronyms
- What's New in This Guide
- 1 Introduction
-
2
Database Management Procedures
- 2.1 Introduction
- 2.2 Removable USB Drive
- 2.3 Verifying the Database
- 2.4 Backing Up the Database Locally
- 2.5 Restoring the Database Locally
- 2.6 Repairing the Database
- 2.7 Copying the Database from the Active to the Standby Fixed Disk
- 2.8 Backing Up System Data to the Removable Media
- 2.9 Restoring System Data from a Removable Media
- 2.10 Formatting the Fixed Disk of the Standby E5-TDM
- 2.11 Formatting Removable Media
-
3
GPL Management Procedures
- 3.1 Introduction
- 3.2 Updating the BLMCAP and OAMHC GPLs
- 3.3 Updating the Signaling Link and Data Link GPLs
- 3.4 Updating the Service GPLs
- 3.5 Updating the Flash GPLs
- 3.6 Updating the HIPR2 GPL
- 3.7 Making the Trial Utility GPL the Approved Utility GPL
- 3.8 Reloading the TDM LCA Clock Bitfile
- 3.9 Updating the BLIXP GPL
- 3.10 Updating a High-Capacity Card to Run the BLIXP GPL
- 3.11 Conversion of SM8G-B Cards
- 3.12 Conversion of SLIC Cards
-
4
System Administration Procedures
- 4.1 Introduction
- 4.2 Setting the Clock and Date on the EAGLE
- 4.3 Changing the Security Defaults
- 4.4 Configuring the Unauthorized Use Warning Message
- 4.5 Changing the Security Log Characteristics
- 4.6 Copying the Security Log to the File Transfer Area
- 4.7 Adding a User to the System
- 4.8 Removing a User from the System
- 4.9 Changing User Information
- 4.10 Changing a Password
- 4.11 Changing Terminal Characteristics
- 4.12 Changing Terminal Command Class Assignments
- 4.13 Configuring Command Classes
- 4.14 Adding a Shelf
- 4.15 Removing a Shelf
- 4.16 Adding an SS7 LIM
- 4.17 Removing an SS7 LIM
- 4.18 Configuring the UIM Threshold
- 4.19 Removing a UIM Threshold
- 4.20 Configuring the Measurements Terminal for an EAGLE Containing 700 Signaling Links
- 4.21 Adding a Measurement Collection and Polling Module (MCPM)
- 4.22 Removing an MCPM
- 4.23 Activating the Fan Feature
- 4.24 Configuring the Measurements Platform Feature
- 4.25 Adding an FTP Server
- 4.26 Removing an FTP Server
- 4.27 Changing an FTP Server
- 4.28 Adding an E5-IPSM
- 4.29 Removing an E5-IPSM
- 4.30 Configuring the Options for the Network Security Enhancements Feature
- 4.31 Configuring the Restore Device State Option
- 4.32 Adding an Entry to the Frame Power Alarm Threshold Table
- 4.33 Removing an Entry from the Frame Power Alarm Threshold Table
- 4.34 Changing an Entry in the Frame Power Alarm Threshold Table
- 4.35 Configuring the IMT Bus Alarm Thresholds
- 4.36 Configuring the Integrated Measurements Feature
- 4.37 Configuring the MFC Option
- 5 SEAS Over IP Configuration Procedures
-
A
Controlled Feature Activation Procedures
- A.1 Introduction
- A.2 Activating Controlled Features
- A.3 Activating the EAGLE OA&M IP Security Enhancement Controlled Feature
- A.4 Unmate IP Security for Terminal and Measurements
- A.5 Activating the 15 Minute Measurements Controlled Feature
- A.6 Clearing a Temporary FAK Alarm
- A.7 Deactivating Controlled Features
- A.8 Activating the HIPR2 High Rate Mode Feature
- A.9 Turning Off the HIPR2 High Rate Mode Feature
- B Setting Up a Secure Telnet Connection to the EAGLE using PuTTY
- C Setting Up a Secure Telnet Connection to the EAGLE using OpenSSH
- D Remote Database Backup and Restore Procedures