chg-bip-fld

Use this command to manually update the board identification PROM (BIP) data during an upgrade in the field.

Note:

Initial programming of the BIP data occurs during manufacturing.

Parameters

data (mandatory)

Board Identification (BID) record field data.

Range:: zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
A character string, specifying board identification field data based on the value of the fld parameter.

fld (mandatory)

Board identification field.

Range:

loc (mandatory)

The card location as stenciled on the shelf of the system.

Range:: 1101 - 1112, 1201 - 1218, 1301 - 1318, 2101 - 2118, 2201 - 2218, 2301 - 2318, 3101 - 3118, 3201 - 3218, 3301 - 3318, 4101 - 4118, 4201 - 4218, 4301 - 4318, 5101 - 5118, 5201 - 5218, 5301 - 5318, 6101 - 6118, 6202 - 6212, 6302 - 6312

type (optional)

Type of board.

Range:

Example

This example shows changing of the sm (Software MatchID) field in BIP data of Main assembly:

chg-bip-fld:loc=1102:fld=sm:data="001"

Dependencies

The value of the loc parameter cannot specify a location for a fixed disk or removable drive.

2242 E2242 Cmd Rej: Destination card invalid

Notes

The card in the specified location must be inhibited.

Output

chg-bip-fld:loc=1103:fld=rev:data="B"


    tekelecstp 10-04-01 12:05:44 IST  EAGLE 42.0.0
    Board ID Prom updated. 
;