Media and Signaling Network Interfaces

The media and signaling uses optical SFP+ connectors. Either 10-gigabit single mode or multimode fiber optic cabling with duplex LC connectors are used to connect the SFP+ ports.

Fiber Optic Cable Handling

When handling a fiber optic cable, please take these precautions:

  1. Never touch the polished end of the fiber cable.
  2. To prevent serious eye damage, never look directly into a fiber optic cable connector or mating adapter.
  3. Clean all fiber optics before installing them into your network according to prescribed procedures.
  4. Ensure that the bend radius of your fiber cables is kept to a minimum of 3” or that specified by the fiber cable manufacturer.
  5. Perform all cabling procedures according to the established standards for your organization.
  1. Insert the duplex LC connector on the end of the fiber cable into one of the SFP+ optical transceivers. The connector should click and lock in place when you insert it properly.
  2. Route the cable away from the system. Make sure that the fiber optic cables are not stretched tightly or subjected to extreme stress.