PRVE-00453
Reverse path filter parameter "rp_filter" for private interconnect network interfaces "{0}" is not set to 0 or 2 on node "{1}".
Cause
The reverse path filter parameter 'rp_filter' is not set to 0 or 2 for the identified private interconnect network interfaces on the specified node.
Action
Ensure that the 'rp_filter' parameter is correctly set to the value of 0 or 2 for each of the interfaces used in the private interconnect classification. If the 'rp_filter' value is set globally with 'all' for private network interfaces, then ensure that the maximum between 'all' and the interface value is either 0 or 2. This will disable or relax the filtering and allow Oracle Clusterware to function correctly. Use the 'sysctl' command to modify the value of this parameter. In the case of a container environment, modify the value of the parameter by re-creating the container with the --sysctl option.
PRVE-00453
Reverse path filter parameter "rp_filter" for private interconnect network interfaces "{0}" is not set to 0 or 2 on node "{1}".
Cause
Reverse path filter parameter 'rp_filter' was not set to 0 or 2 for identified private interconnect network interfaces on specified node.
Action
Ensure that the 'rp_filter' parameter is correctly set to the value of 0 or 2 for each of the interface used in the private interconnect classification, This will disable or relax the filtering and allow Oracle Clusterware to function correctly. Use 'sysctl' command to modify the value of this parameter.
PRVE-00453
Reverse path filter parameter "rp_filter" for private interconnect network interfaces "{0}" is not set to 0 or 2 on node "{1}".
Cause
Reverse path filter parameter 'rp_filter' was not set to 0 or 2 for identified private interconnect network interfaces on specified node.
Action
Ensure that the 'rp_filter' parameter is correctly set to the value of 0 or 2 for each of the interface used in the private interconnect classification, This will disable or relax the filtering and allow Oracle Clusterware to function correctly. Use 'sysctl' command to modify the value of this parameter.
