Database Error Messages

The error occurred due to one of the following reasons:

1. The locator was not enabled for buffering.
2. The locator was not updated but was used for a write or a flush

operation.

Choose the action corresponding to the cause as numbered:

1. Enable the locator for buffering.
2. Use only an updated locator for an LOB update operation.

There are several causes: (1) the locator was never enabled for buffering (2) it is not an updated locator but is being used for a write/flush operation

For (1) enable the locator for buffering; (2) ensure that only an updated locator is used for a LOB update operation

There are several causes: (1) the locator was never enabled for buffering (2) it is not an updated locator but is being used for a write/flush operation

For (1) enable the locator for buffering; (2) ensure that only an updated locator is used for a LOB update operation

There are several causes: (1) the locator was never enabled for buffering (2) it is not an updated locator but is being used for a write/flush operation

For (1) enable the locator for buffering; (2) ensure that only an updated locator is used for a LOB update operation

There are several causes: (1) the locator was never enabled for buffering (2) it is not an updated locator but is being used for a write/flush operation

For (1) enable the locator for buffering; (2) ensure that only an updated locator is used for a LOB update operation