1. Exadata Server X11M Service Manual
  2. Appendices: Server Reference
  3. Server Installation Information
  4. Rackmounting the Server
  5. Install Mounting Brackets on the Server

Install Mounting Brackets on the Server

To install the mounting brackets on the sides of the server:

  1. Position a mounting bracket against the chassis so that the slide-rail lock is at the server front, and the five keyhole openings on the mounting bracket are aligned with the five locating pins on the side of the chassis.
    Figure showing the mounting bracket aligned with server chassis locating pins.
    Call Out Description

    1

    Chassis front

    2

    Slide-rail lock

    3

    Mounting bracket

    4

    Mounting bracket clip
  2. When the heads of the five chassis locating pins protrude through the five keyhole openings in the mounting bracket, pull the mounting bracket toward the front of the chassis until the mounting bracket clip locks into place with an audible click.
  3. Verify that the back locating pin is engaged with the mounting bracket clip.
  4. Repeat Step 1 through Step 3 to install the other mounting bracket on the other side of the server.