Error Messages

B Error Messages

The following messages are logged to the USERLOG file from an Oracle Tuxedo Mainframe Adapter for SNA Gateway (GWSNAX) and the Communications Resource Manager (CRM).

1118:INFO	A BLOCKING timeout has occurred on an outbound request
	DESCRIPTION	A blocking time out has occurred on a request to the host.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Check configuration and increase the BLOCKTIME value, if needed.
1121:ERROR	Bad action state
	DESCRIPTION	An internal error has been detected processing the action.
	ACTION	Contact Oracle Customer Support.
1122:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected, `gw_nw_acall` has returned a failure.
	ACTION	Contact Oracle Customer Support.
1600:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected, `gw_nw_connect` has returned a failure.
	ACTION	Contact Oracle Customer Support.
1602:ERROR	Cannot open SNA connection
	DESCRIPTION	Unable to allocate a network context. `gw_nw_AllocNwCtx` failed.
	ACTION	See previously printed ULOG message for cause.
1604:ERROR	Initialization of environment failed
	DESCRIPTION	Unable to initialize the conversation environment.
	ACTION	See previously printed ULOG message for cause.
1621:ERROR	Bad action state
	DESCRIPTION	An internal error has been detected processing the action.
	ACTION	Contact Oracle Customer Support.
1622:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected, `gw_nw_convsend` has returned a failure.
	ACTION	Contact Oracle Customer Support.
1625: ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected, `gw_nw_convsend` has returned a failure.
	ACTION	Contact Oracle Customer Support.
1625:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected, `gw_nw_disconnect` has returned a failure.
	ACTION	Contact Oracle Customer Support.
1630:ERROR	Unable to send data on sna_conv_idx .
	DESCRIPTION	A network error has occurred while processing a send to the CRM. `gw_nw_convsend` failed.
	ACTION	Determine if CRM is still active. Look for other ULOG messages that specify a reason for this failure.
1989:ERROR	External encode/decode service returned error: \n\tTUXEDO code ()
	DESCRIPTION	A Tuxedo error has occurred in the Data Integration portion of the product.
	ACTION	Use the Tuxedo error to resolve the Data Integration problem. If unable to resolve the problem, contact Oracle Customer Support.
1990:ERROR	Cannot create external decode action!
	DESCRIPTION	An internal error has occurred in the Data Integration portion of the product.
	ACTION	Contact Oracle Customer Support.
1991:ERROR	Cannot create external encode action!
	DESCRIPTION	An internal error has occurred in the Data Integration portion of the product.
	ACTION	Contact Oracle Customer Support.
1992:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected, `gw_nw_decode` has returned a failure.
	ACTION	Contact Oracle Customer Support.
1993:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected, `gw_nw_encode` has returned a failure.
	ACTION	Contact Oracle Customer Support.
1994:ERROR	Context data incorrect - null context index
	DESCRIPTION	An internal error has been detected, `gw_nw_decode` has returned a failure.
	ACTION	Contact Oracle Customer Support.
1995:ERROR	Context data incorrect - null context index
	DESCRIPTION	An internal error has been detected, `gw_nw_encode` has returned a failure.
	ACTION	Contact Oracle Customer Support.
2200:ERROR	Cannot malloc remote domain structure
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2204:ERROR	Cannot malloc local SNA structur
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2205:ERROR	Unable to obtain local snadom information from shmem
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to get needed information from shared memory.
	ACTION	Contact Oracle Customer Support.
2206:ERROR	Cannot malloc remote service structure
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2207:ERROR	Cannot malloc remote SNA structure
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2210:ERROR	Can't create listener for this GATEWAY
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to create a listener.
	ACTION	Contact Oracle Customer Support.
2211:WARNING	NO SNA conversations waiting for startup
	DESCRIPTION	No conversations are waiting at startup.
	ACTION	Contact Oracle Customer Support.
2214:ERROR	Unable to set APPC_GATEWAY environment variable
	DESCRIPTION	An internal error has been detected, `_gp_get_nodename` failed.
	ACTION	Contact Oracle Customer Support.
2220:ERROR	Memory Allocation Failure
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2221:ERROR	Memory Allocation Failure
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2222:ERROR	Memory Allocation Failure for RDOM table
	DESCRIPTION	An internal error has been detected,`gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2223:ERROR	Memory Allocation Failure for SNALINK table
	DESCRIPTION	An internal error has been detected, gw_nw_init was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2224:ERROR	Memory Allocation Failure for CRM table
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2225:ERROR	Memory Allocation Failure for SNASTACK table
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2226:ERROR	Unable to access SNALINK information from memory
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to get needed information from shared memory.
	ACTION	Contact Oracle Customer Support.
2227:ERROR	Unable to access CRM information from memory
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to get needed information from shared memory.
	ACTION	Contact Oracle Customer Support.
2228:ERROR	Unable to convert CRM network address for <text>
	DESCRIPTION	An error has occurred while trying to contact the CRM during startup.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Probably due to a configuration problem.
2229:ERROR	Unable to access SNASTACK information from memory
	DESCRIPTION	An internal error has been detected, `gw_nw_init` was unable to get needed information from shared memory.
	ACTION	Contact Oracle Customer Support.
2230:ERROR	Unable to build internal network tables
	DESCRIPTION	An internal error has been detected, `gw_nw_build_nwtbls` failed.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Probably due to a configuration problem.
2231:ERROR	Unable to connect to CRM <text>
	DESCRIPTION	An error has occurred while trying to contact the CRM during startup.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Possible reasons are: The CRM server was not configured in the `UBBCONFIG`. The `//host:port` parameters as specified in the `DMCONFIG` and the `CRM` command line parameters in the `UBBCONFIG` do not agree
2232:ERROR	Unable to SIGNON to CRM <text>
	DESCRIPTION	An error has occurred while signing on to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2233:ERROR	Unable to send STACK configuration to CRM <text>
	DESCRIPTION	An error has occurred while sending the stack configuration to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2234:ERROR	Unable to send SNALINK configuration to CRM <text>
	DESCRIPTION	An error has occurred while sending the link configuration to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2235:ERROR	Unable to send START message to CRM
	DESCRIPTION	An error has occurred while sending the START command to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2236:ERROR	Unable to send SHUTDOWN message to CRM <text>
	DESCRIPTION	An error has occurred while sending the SHUTDOWN command to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2237:ERROR	STATE ERROR occurred during initialization, SHUTTING DOWN
	DESCRIPTION	An internal state error has occurred start up.
	ACTION	Contact Oracle Customer Support.
2238:ERROR	Unknown message type received from CRM during initialization
	DESCRIPTION	An unknown message has been received from CRM.
	ACTION	Contact Oracle Customer Support.
2239:ERROR	GATEWAY FAILS to complete connection to the CRM during initialization
	DESCRIPTION	Connection to CRM is incomplete.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2240:ERROR	Unable to send SHUTDOWN message to CRM <text>
	DESCRIPTION	`GWSNAX` is unable to send the SHUTDOWN command to CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. The CRM process has probably already terminated.
2241:ERROR	Unable to access codepage table [<text>], reason= <text> (<number>)
NA	DESCRIPTION	Oracle Tuxedo Mainframe Adapter for SNA Gateway is unable to find the file for the listed codepage for the reason specified. If reason is "Error 0", the () value is the return code from the codepage read routine. 2 - Can't read from file 3 - - Can't allocate memory 4 - Null/invalid pointer 5 - Invalid parameter 10 - Syntax error 11 - Unsupported format version 12 - Unsupported item
NA	ACTION	Examine the DMCONFIG to determine if the CODEPAGE for a remote domain is specified incorrectly. Correct and retry.
2247:INFO	Codepage for Remote Domain : <`Remote Domain Name`> `Codepage`
NA	DESCRIPTION	Examine the ULOG for more information regarding the Codepage used for the remote domain.
	ACTION	No action needs to be taken.
2302:ERROR	Unable to complete initialization with CRM
	DESCRIPTION	Connection to CRM is incomplete.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2509:ERROR	Unable to obtain new convid id for this request
	DESCRIPTION	An internal error has been detected, `gw_nw_getnxt_cd` has returned a failure.
	ACTION	Contact Oracle Customer Support.
2561:ERROR	Action data incorrect - null action index
	DESCRIPTION	An internal error has been detected in `gw_nw_recv`.
	ACTION	Contact Oracle Customer Support.
2601:ERROR	Unable to send data on sna_conv_idx <number>
	DESCRIPTION	An error has occurred while sending reply data (`gw_nw_reply`) to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2602:ERROR	Null send data buffer
	DESCRIPTION	An error has occurred while sending reply data (`gw_nw_reply`) to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2800:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected in `gw_nw_clr_convid`.
	ACTION	Contact Oracle Customer Support.
2801:ERROR	Invalid conversation id
	DESCRIPTION	An internal error has been detected in `gw_nw_clr_convid`.
	ACTION	Contact Oracle Customer Support.
2802:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected in `gw_nw_getnxt_cd`.
	ACTION	Contact Oracle Customer Support.
2805:ERROR	Unable to obtain remote domain info from shared memory
	DESCRIPTION	An internal error has been detected, `gw_nw_init_env` was unable to get needed information from shared memory.
	ACTION	Contact Oracle Customer Support.
2806:ERROR	Unable to obtain snadom info from rdom
	DESCRIPTION	An internal error has been detected, `gw_nw_init_env` was unable to get needed information from shared memory.
	ACTION	Contact Oracle Customer Support.
2808:ERROR	Cannot realloc sna structures
	DESCRIPTION	An internal error has been detected, `gw_nw_AllocNwCtx` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2816:ERROR	Memory allocation failure
	DESCRIPTION	An internal error has been detected, `gw_nw_empty_sndbuf` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
2847:ERROR	SECURITY: Unable to get remote username from shared memory using local principal name <text>
	DESCRIPTION	A security error has occurred, the user is not authorized to access the remote host.
	ACTION	Contact your local security administrator.
2848:ERROR	SECURITY: Unable to get local principal name from shared memory using appkey
	DESCRIPTION	A security error has occurred, the user is not authorized to access the remote host.
	ACTION	Contact your local security administrator.
2849:ERROR	SECURITY: Unable to extract password from shared memory
	DESCRIPTION	A security error has occurred, the user is not authorized to access the remote host.
	ACTION	Contact your local security administrator.
2850:ERROR	SECURITY: Unable to get security schedule
	DESCRIPTION	A security error has occurred, the user is not authorized to access the remote host.
	ACTION	Contact your local security administrator.
2853:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected in `gw_nw_mk_error`.
	ACTION	Contact Oracle Customer Support.
2854:ERROR	Context data incorrect - null context index for action <number>
	DESCRIPTION	An internal error has been detected in `gw_nw_mk_error`.
	ACTION	Contact Oracle Customer Support.
2860:ERROR	SECURITY: Unable to get remote user from shared memory
	DESCRIPTION	A security error has occurred, the remote user is not authorized to access the local Tuxedo host.
	ACTION	Contact your local security administrator.
2935:ERROR	Too many unrecoverable errors occurred - deleting action
	DESCRIPTION	An error has occurred in `gw_nw_mk_error`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
2938:ERROR	SECURITY: Unable to get appkey for this outbound request
	DESCRIPTION	A security error has occurred, the user is not authorized to access the remote host.
	ACTION	Contact your local security administrator.
2939:ERROR	Deleting the action with the invalid context, <number>
	DESCRIPTION	An internal error has been detected in `gw_nw_snd failure`.
	ACTION	Contact Oracle Customer Support.
3028:ERROR	Can't find transaction node for Network TMS event!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranCommon`.
	ACTION	Contact Oracle Customer Support.
3029:WARNING	Shutting down GWSNAX!
	DESCRIPTION	A severe error such as a protocol error or memory corruption has occurred and has already been logged. The GWSNAX process will shutdown.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
3030:ERROR	Unknown input transactional event (<number>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranCvtMsgEvt2TranEvt`.
	ACTION	Contact Oracle Customer Support.
3031:ERROR	Invalid input object pointer!
	DESCRIPTION	An internal error has been detected in `gw_nw_BindStateObject`.
	ACTION	Contact Oracle Customer Support.
3032:ERROR	Invalid input object initial state!
	DESCRIPTION	An internal error has been detected in `gw_nw_BindStateObject`.
	ACTION	Contact Oracle Customer Support.
3033:ERROR	Invalid input object type!
	DESCRIPTION	An internal error has been detected in `gw_nw_BindStateObject`.
	ACTION	Contact Oracle Customer Support.
3034:ERROR	Invalid input state object event(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_StateObjectTestEvent`.
	ACTION	Contact Oracle Customer Support.
3035:ERROR	Event <text> is not allowed for state <text> !
	DESCRIPTION	An internal error has been detected in `gw_nw_StateObjectTestEvent`.
	ACTION	Contact Oracle Customer Support.
3036:ERROR	Invalid object event test metric with value <number> for <text>!
	DESCRIPTION	An internal error has been detected in `gw_nw_StateObjectTestEvent`.
	ACTION	Contact Oracle Customer Support.
3037:ERROR	Invalid input trace object pointer!
	DESCRIPTION	An internal error has been detected in `gw_nw_InitEventTrace`.
	ACTION	Contact Oracle Customer Support.
3038:ERROR	Invalid input trace object pointer!
	DESCRIPTION	An internal error has been detected in `gw_nw_AddEventTrace`.
	ACTION	Contact Oracle Customer Support.
3039:ERROR	Input event <number> out of range <number> !
	DESCRIPTION	An internal error has been detected in `gw_nw_AddEventTrace`.
	ACTION	Contact Oracle Customer Support.
3040:ERROR	Invalid input trace object pointer!
	DESCRIPTION	An internal error has been detected in `gw_nw_QueryEventTrace`.
	ACTION	Contact Oracle Customer Support.
3041:ERROR	Invalid input trace object pointer!
	DESCRIPTION	An internal error has been detected in `gw_nw_PrintEventTrace`.
	ACTION	Contact Oracle Customer Support.
3042:ERROR	Invalid input event identification(<number>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_EventToString`.
	ACTION	Contact Oracle Customer Support.
3044:WARNING	Transaction table already exists!
	DESCRIPTION	An attempt has been made to create the node table and it already exists.
	ACTION	No action needs to be taken.
3045:ERROR	Invalid input parameters!
	DESCRIPTION	An internal error has been detected in `gw_nw_AssociateTranByTXID`.
	ACTION	Contact Oracle Customer Support.
3046:ERROR	Requires CRM id to create transaction!
	DESCRIPTION	An internal error has been detected in `gw_nw_AssociateTranByTXID`.
	ACTION	Contact Oracle Customer Support.
3047:ERROR	Cannot associate with network transaction!
	DESCRIPTION	An internal error has been detected in `gw_nw_AssociateTranByTXID`.
	ACTION	Contact Oracle Customer Support.
3048:ERROR	Invalid input transaction context!
	DESCRIPTION	An internal error has been detected in `gw_nw_AssociateTranByTCTXT`.
	ACTION	Contact Oracle Customer Support
3049:ERROR	Invalid input transaction event(<number>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_AssociateTranByTCTXT`.
	ACTION	Contact Oracle Customer Support.
3050:ERROR	Invalid input transaction context pointer!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranCreateTCTXT`.
	ACTION	Contact Oracle Customer Support.
3051:ERROR	Exceeded local transaction limit (<number>)!
	DESCRIPTION	Number of concurrent transactions using this domain gateway exceeded the configured limit.
	ACTION	Examine the DMCONFIG file for the MAXTRAN parameter, this number is the limit. If MAXTRAN is not specified, then examine the ubbconfig file for the MAXGTT parameter. In the later case MAXGTT is the limit. Modify the limit if necessary.
3052:ERROR	Can not create shared memory nettxid!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranCreateTCTXT`.
	ACTION	Contact Oracle Customer Support.
3053:ERROR	Create transaction tree node failed!
	DESCRIPTION	`gw_nw_TranCreateTCTXT` failed to create the transaction tree node object. This can be caused by reaching the configured transaction limit or by a memory allocation failure.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. If the cause is the limit being reached, update the configuration. If the cause is a memory allocation failure, update the system and/or the system configuration.
3054:ERROR	Invalid input transaction handle!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranGetTCTXT`.
	ACTION	Contact Oracle Customer Support.
3055:ERROR	Invalid input transaction handle!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranGetTXID`.
	ACTION	Contact Oracle Customer Support.
3056:ERROR	Invalid input parameter!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranProcessEvent`.
	ACTION	Contact Oracle Customer Support.
3057:ERROR	Unable to calculate transaction handle!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranProcessEvent`.
	ACTION	Contact Oracle Customer Support.
3058:ERROR	Input Gateway event not transactional!
	DESCRIPTION	The service request inbound from a remote host is transactional but the Oracle Tuxedo Mainframe Adapter for SNA Gateway is not configured as a transactional gateway.
	ACTION	The MAXSYNCLVL specified in the DMCONFIG must be 2 if transactional requests are to be processed.
3059:ERROR	Transaction does not exist!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranProcessEvent`.
	ACTION	Contact Oracle Customer Support.
3060:ERROR	Invalid input transaction handle!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranProcessEvent`.
	ACTION	Contact Oracle Customer Support.
3061:ERROR	Invalid Gateway action identification!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranSetUpExtTmsEvent`.
	ACTION	Contact Oracle Customer Support.
3062:ERROR	Decoding input transaction message failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranSetUpExtTmsEvent`.
	ACTION	Contact Oracle Customer Support.
3063:ERROR	CRM verb <number> is not for TMS event!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranSetUpExtTmsEvent`.
	ACTION	Contact Oracle Customer Support.
3064:ERROR	Invalid input transaction context!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranRelease`.
	ACTION	Contact Oracle Customer Support.
3065:ERROR	Transaction for context(<number>) not found!
	DESCRIPTION	The specified context for the transaction to be released could not be found by `gw_nw_TranRelease`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
3066:ERROR	Cannot disassociate with network transaction!
	DESCRIPTION	An error has been returned by `gw_tx_end`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
3067:ERROR	Cannot set remote domain for transaction!
	DESCRIPTION	An error has been returned by `gw_tx_set_rdom`. Several possibilities exist for this failure. The process is unable to obtain the shared memory lock. The configured limit for the number of remote domains that can be involved in the same transaction has been reached. This limit is specified in the MAXRDTRAN in the DMCONFIG.
	ACTION	Examine the `DMCONFIG` and compare with the number of remote domains which might become involved in the same transaction. Update the `DMCONFIG` if necessary. Also examine the ULOG for more information concerning possible reasons for the failure.
3068:ERROR	Invalid input transaction handle!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranGetNodePtr`.
	ACTION	Contact Oracle Customer Support.
3069:ERROR	Transaction handle not in use!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranGetNodePtr`.
	ACTION	Contact Oracle Customer Support.
3070:ERROR	Transaction processing not yet initialize!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranGetNodePtr`.
	ACTION	Contact Oracle Customer Support.
3071:ERROR	Defined transaction limit reached!
	DESCRIPTION	The number of concurrent transactions using this domain gateway has exceeded the limit.
	ACTION	Examine the `DMCONFIG` file for the MAXTRAN parameter, this number is the limit. If MAXTRAN is not specified, then examine the ubbconfig file for the MAXGTT parameter. In the later case MAXGTT is the limit. Modify the limit if necessary.
3072:ERROR	Allocate CRM branch structure failed!
	DESCRIPTION	An internal error has been detected in `gw_nw__gw_nw_AllocateNode`.
	ACTION	Contact Oracle Customer Support.
3073:ERROR	Unable to bind outbound node state object!
	DESCRIPTION	A failure was returned by `gw_nw_BindStateObject`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
3074:ERROR	Unable to bind inbound node state object!
	DESCRIPTION	A failure was returned by `gw_nw_BindStateObject`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
3075:ERROR	Unable to bind recover node state object!
	DESCRIPTION	A failure was returned by `gw_nw_BindStateObject`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
3076:ERROR	Invalid event to create transaction tree node!
	DESCRIPTION	An internal error has been detected in `_gw_nw_AllocateNode`.
	ACTION	Contact Oracle Customer Support.
3077:ERROR	Memory allocation failure!
	DESCRIPTION	An internal error has been detected in `gw_nw_AllocBranch`.
	ACTION	Contact Oracle Customer Support.
3078:ERROR	Event(<text>) is not allowed to create CRM branch!
	DESCRIPTION	An internal error has been detected in `gw_nw_AllocBranch`.
	ACTION	Contact Oracle Customer Support.
3079:ERROR	Free more branch than transaction tree node has!
	DESCRIPTION	An internal error has been detected in `gw_nw_FreeBranch`.
	ACTION	Contact Oracle Customer Support.
3080:ERROR	Protocol violation, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_3`.
	ACTION	Contact Oracle Customer Support.
3081:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_4`.
	ACTION	Contact Oracle Customer Support.
3082:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_5`.
	ACTION	Contact Oracle Customer Support.
3083:ERROR	Branch in a bad state(<text>) to issue prepare!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_5`.
	ACTION	Contact Oracle Customer Support.
3084:WARNING	Inconsistent branch state for prepare(<number>,<number> )!
	DESCRIPTION	The transaction branch is in an inconsistent state for issuing a prepare. It will be assumed that they are all prepared.
	ACTION	No action needs to be taken.
3085:INFO	Transaction node is deallocated because of ABEND!
	DESCRIPTION	Informational message. Oracle Tuxedo Mainframe Adapter for SNA Gateway detected an ABEND condition or received an ABEND event from the CRM which caused the node object to be destroyed.
	ACTION	No action needs to be taken.
3086:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_7`.
	ACTION	Contact Oracle Customer Support.
3087:ERROR	Branch in a bad state(<text>) to issue prepare!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_7`.
	ACTION	Contact Oracle Customer Support.
3088:WARNING	Inconsistent branch state for rollback(<number>,<number> )!
	DESCRIPTION	The transaction branch was in an inconsistent state for issuing a rollback. It will be assumed that they are all rolled back.
	ACTION	No action needs to be taken.
3089:WARNING	Inconsistent branch accounting for rollback(<number>, <number>,<number> )!
	DESCRIPTION	The transaction branch accounting was inconsistent while issuing a rollback.
	ACTION	No action needs to be taken.
3090:WARNING	Incorrect branch accounting for rollback(<number>)!
	DESCRIPTION	The transaction branch accounting was incorrect while issuing a rollback.
	ACTION	No action needs to be taken.
3091:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_8`.
	ACTION
3092:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_9`.
	ACTION	Contact Oracle Customer Support
3093:ERROR	Invalid Gateway action, receive event(<text >) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_10`.
	ACTION	Contact Oracle Customer Support.
3094:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_11`.
	ACTION	Contact Oracle Customer Support.
3095:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_12`.
	ACTION	Contact Oracle Customer Support.
3096:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_13`.
	ACTION	Contact Oracle Customer Support.
3097:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_14`.
	ACTION	Contact Oracle Customer Support.
3098:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_15`.
	ACTION	Contact Oracle Customer Support.
3099:ERROR	Retired node method!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_Retired`.
	ACTION	Contact Oracle Customer Support.
3100:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_16`.
	ACTION	Contact Oracle Customer Support.
3101:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_17`.
	ACTION	Contact Oracle Customer Support.
3102:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_18`.
	ACTION	Contact Oracle Customer Support.
3103:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_19`.
	ACTION	Contact Oracle Customer Support.
3104:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_20`.
	ACTION	Contact Oracle Customer Support.
3105:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_21`.
	ACTION	Contact Oracle Customer Support.
3106:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_22`.
	ACTION	Contact Oracle Customer Support.
3107:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_23`.
	ACTION	Contact Oracle Customer Support.
3108:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_24`.
	ACTION	Contact Oracle Customer Support.
3109:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_25`.
	ACTION	Contact Oracle Customer Support.
3110:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_26`.
	ACTION	Contact Oracle Customer Support.
3111:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_27`.
	ACTION	Contact Oracle Customer Support.
3112:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_28`.
	ACTION	Contact Oracle Customer Support.
3113:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_29`.
	ACTION	Contact Oracle Customer Support.
3114:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_30`.
	ACTION	Contact Oracle Customer Support.
3115:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_31`.
	ACTION	Contact Oracle Customer Support.
3116:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_32`.
	ACTION	Contact Oracle Customer Support.
3117:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_33`.
	ACTION	Contact Oracle Customer Support.
3118:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_39`.
	ACTION	Contact Oracle Customer Support.
3119:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_40`.
	ACTION	Contact Oracle Customer Support.
3120:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_42`.
	ACTION	Contact Oracle Customer Support.
3121:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_43`.
	ACTION	Contact Oracle Customer Support.
3122:ERROR	Encoding transaction message for verb(<number>) failed!
	DESCRIPTION	A failure was returned by `CRM_tx_msg`.
	ACTION	Contact Oracle Customer Support.
3123:ERROR	CRM(<number>) in bad state(<text>) to issue verb(<number>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeSendToBranch`.
	ACTION	Contact Oracle Customer Support.
3124:ERROR	Send verb <number> to CRM failed!
	DESCRIPTION	A failure has been detected while sending the specified verb to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Determine if the CRM process is still active.
3125:ERROR	Encoding transactional message for verb(<number>) failed!
	DESCRIPTION	A failure was returned by CRM_tx_msg.
	ACTION	Contact Oracle Customer Support.
3126:ERROR	CRM(<number>) in bad state(<text>) to issue verb(<number>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeSendToSubordinate`.
	ACTION	Contact Oracle Customer Support.
3127:ERROR	Send verb(<number>) to CRM failed!
	DESCRIPTION	A failure has been detected while sending the specified verb to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Determine if the CRM process is still active.
3128:ERROR	Encoding transactional message for verb(<number>) failed!
	DESCRIPTION	A failure was returned by CRM_tx_msg
	ACTION	Contact Oracle Customer Support.
3129:ERROR	CRM(<number>) in bad state(<text>) to issue verb(<number>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeSendToSubordinate`.
	ACTION	Contact Oracle Customer Support.
3130:ERROR	Send verb(<number>) to CRM failed!
	DESCRIPTION	A failure has been detected while sending the specified verb to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Determine if the CRM process is still active.
3131:ERROR	Protocol violation, branch id[<number>] at state(<text>) receive event(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_BranchMethod_1`.
	ACTION
3132:ERROR	Memory allocation error!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranRestart`.
	ACTION	Contact Oracle Customer Support.
3133:ERROR	Unable to get shared memory semaphore lock!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranRestart`.
	ACTION	Contact Oracle Customer Support.
3134:ERROR	Unable to find transaction on GTT!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranRestart`.
	ACTION	Contact Oracle Customer Support.
3135:ERROR	SNAX group is not participating the transaction!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranRestart`.
	ACTION	Contact Oracle Customer Support.
3136:ERROR	Unable to setup transaction recovery!
	DESCRIPTION	A failure was returned by `gw_nw_TranRecover`.
	ACTION	Contact Oracle Customer Support.
3137:ERROR	Unable to setup transaction recovery!
	DESCRIPTION	A failure was returned by `gw_nw_TranRecover`.
	ACTION	Contact Oracle Customer Support.
3138:ERROR	Unable to create recovery action!
	DESCRIPTION	A failure was returned by `gw_new_action`.
	ACTION	Contact Oracle Customer Support.
3139:ERROR	Unable to create recovery action!
	DESCRIPTION	A failure was returned by `gw_chld_action`.
	ACTION	Contact Oracle Customer Support.
3140:ERROR	Unable to setup transaction recovery!
	DESCRIPTION	A failure was returned by `gw_nw_TranRecover`.
	ACTION	Contact Oracle Customer Support.
3141: ERROR	Unable to create recovery action!
	DESCRIPTION	A failure was returned by `gw_new_action`.
	ACTION	Contact Oracle Customer Support.
3142:ERROR	Unable to create recovery action!
	DESCRIPTION	A failure was returned by `gw_chld_action`.
	ACTION	Contact Oracle Customer Support.
3143:ERROR	Unable to setup transaction recovery!
	DESCRIPTION	A failure was returned by `gw_nw_TranRecover`.
	ACTION	Contact Oracle Customer Support.
3144:ERROR	Unable to setup transaction recovery!
	DESCRIPTION	A failure was returned by `gw_nw_TranRecover`.
	ACTION	Contact Oracle Customer Support.
3145:ERROR	Unable to release shared memory lock!
	DESCRIPTION	A failure was returned by `_gw_shmunlock`.
	ACTION	Contact Oracle Customer Support.
3146:ERROR	Unable to find CRM for superior remote domain(<text>)!
	DESCRIPTION	Failed to find the remote domain definition in the configuration in order to get the CRM identification.
	ACTION	Examine the DMCONFIG for changes between the boots that would modify or remove the remote definition. If no such change has occurred, contact Oracle Customer Support.
3147:ERROR	Could not find Remote Domain(<text>) to do recovery!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranRecover`.
	ACTION	Contact Oracle Customer Support.
3148:ERROR	Could not find Remote Domain to do recovery!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranRecover`.
	ACTION	Contact Oracle Customer Support.
3149:ERROR	Could not create transaction tree structure!
	DESCRIPTION	Unable to allocate a transaction tree node structure to represent the transaction recovery object.
	ACTION	Examine the configuration to determine if there has been a change of MAXTRAN in DMCONFIG and/or a change of MAXGTT in UBBCONFIG. This condition may occur if there is a decrease in the number of transactions allowed between boots while many transactions must be recovered. If no changes have been made, contact Oracle Customer Support.
3150:ERROR	Unable to create CRM branch structure!
	DESCRIPTION	A failure was returned by `_gw_nw_AllocBranch`.
	ACTION	Contact Oracle Customer Support.
3151:ERROR	Unable to create CRM branch structure!
	DESCRIPTION	A failure was returned by `_gw_nw_AllocBranch`.
	ACTION	Contact Oracle Customer Support.
3152:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_44`.
	ACTION	Contact Oracle Customer Support.
3153:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_45`.
	ACTION	Contact Oracle Customer Support.
3154:ERROR	Invalid Gateway action, receive event(<text>) at state(<text>)!
	DESCRIPTION	An internal error has been detected in `gw_nw_NodeMethod_46`.
	ACTION	Contact Oracle Customer Support.
3155:ERROR	Invalid transaction context(<number>) from CRM!
	DESCRIPTION	An internal error has been detected in `gw_nw_TranSetUpExtTmsEvent`.
	ACTION	Contact Oracle Customer Support.
3156:WARNING	Undefined instrumentation register <number> specification, ignored!
	DESCRIPTION	An internal error has been detected in `gw_nw_SetUpInstrumentation`.
	ACTION	Contact Oracle Customer Support.
3157:INFO	CONNECTED TO CRM
	DESCRIPTION	The Oracle Tuxedo Mainframe Adapter for SNA Gateway process has successfully started the Gateway connection to the CRM process.
	ACTION	No action needs to be taken.
3158:WARNING	CRM Link <text> InoperablE
	DESCRIPTION	The specified link did not start up correctly.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
3159:ERROR	INVALID STARTTYPE (<text>) - calling shutdown
	DESCRIPTION	The STARTTYPE specified in the `DMCONFIG` must be AUTO or COLD.
	ACTION	Correct the value specified in the DMCONFIG and restart.
3500:ERROR	Unable to find remote service definition link
	DESCRIPTION	An internal error has been detected in `gw_nw_decode`.
	ACTION	Contact Oracle Customer Support.
3501:ERROR	Unable to find local service definition link
	DESCRIPTION	An internal error has been detected in `gw_nw_decode`.
	ACTION	Contact Oracle Customer Support.
3502:ERROR	Buffer type (<text>,<text>) not defined in the buffer type switch!
	DESCRIPTION	The buffer type associated with the inbound message is not specified in the type switch.
	ACTION	Examine the application and the configuration to determine which buffer type is being used. Oracle Tuxedo Mainframe Adapter for SNA Gateway only supports standard Tuxedo buffer types over the domain gateway. If the buffer type is VIEW, VIEW32, then also examine the environment variables VIEWDIR, VIEWFILES, VIEW32DIR, or VIEW32FILES.
3503:ERROR	Failed to tpalloc() STRING buffer of size <number>
	DESCRIPTION	No buffer of type STRING was returned by `tpalloc` for the size specified.
	ACTION	If the size specified is 1, then a length of zero was received. Check the application to determine if it has an error, otherwise contact Oracle Customer Support.
3504:ERROR	Failed to tpalloc() CARRAY/X_OCTET buffer of size <number>
	DESCRIPTION	No buffer of type CARRAY or X_OCTET was returned by tpalloc for the size specified.
	ACTION	If the size specified is 1, then a length of zero was received. Check the application to determine if it has an error, otherwise contact Oracle Customer Support.
3505:ERROR	Input buffer too big (<number>)!
	DESCRIPTION	The buffer received of the size specified, exceeded the maximum allowed of 32767.
	ACTION	Check the application to determine if it has an error, otherwise contact Oracle Customer Support.
3506:ERROR	Missing subtype specification for <text>
	DESCRIPTION	The buffer type specified of VIEW, VIEW32, X_C_TYPE, or X_COMMON requires that a subtype be specified.
	ACTION	Examine the application and the DMCONFIG and correct the problem.
3507:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_decode`.
	ACTION	Contact Oracle Customer Support.
3508:ERROR	Convert buffer type(<text>,<text>) failed, convert failure!
	DESCRIPTION	The conversion of the buffer received from the remote host was unsuccessful.
	ACTION	Examine the application to determine if it has an error, examine the `DMCONFIG` definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3509:ERROR	Convert buffer type(<text>,<text>) failed, length too big!
	DESCRIPTION	The conversion of the buffer received from the remote host was unsuccessful due to the resulting size exceeding the maximum of 32767.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3510:ERROR	Failed to tpalloc() buffer (<text>,<text>) of size <number>
	DESCRIPTION	No buffer was returned by tpalloc for the size specified to hold the converted buffer data.
	ACTION	Examine the application to determine if it has an error, otherwise contact Oracle Customer Support.
3511:ERROR	Missing subtype for FML type buffer!
	DESCRIPTION	The buffer type specified of FML requires that a subtype be specified.
	ACTION	Examine the application and the configuration to determine which buffer type is being used. Oracle Tuxedo Mainframe Adapter for SNA Gateway only supports standard Tuxedo buffer types over the domain gateway. If the buffer type is VIEW, VIEW32, then also examine the environment variables VIEWDIR, VIEWFILES, VIEW32DIR, or VIEW32FILES.
3512:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_decode`.
	ACTION	Contact Oracle Customer Support.
3513:ERROR	Malloc failed, unable to convert!
	DESCRIPTION	The conversion of the buffer received from the remote host was unsuccessful.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3514:ERROR	Failed to malloc temporary buffer of size <number>
	DESCRIPTION	An internal error has been detected in `gw_nw_decode`.
	ACTION	Contact Oracle Customer Support.
3515:ERROR	Convert buffer type(<text>,<text>) failed, convert failure!
	DESCRIPTION	The conversion of the buffer received from the remote host was unsuccessful.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any mistakes in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3516:ERROR	Failed to tpalloc() buffer (<text>,<text>) of size <number>
	DESCRIPTION	No buffer was returned by tpalloc for the size specified to hold the converted buffer data.
	ACTION	Check the application to determine if it has an error, otherwise contact Oracle Customer Support.
3517:ERROR	Missing subtype definition for FML32 buffer type!
	DESCRIPTION	The buffer type specified of FML32 requires that a subtype be specified.
	ACTION	Correct the DMCONFIG definition.
3518:ERROR	Malloc temporary of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_decode`.
	ACTION	Contact Oracle Customer Support.
3519:ERROR	Convert FML32 buffer type(<text>,<text>) failed, convert failure!
	DESCRIPTION	The conversion of the buffer received from the remote host was unsuccessful.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3520:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_decode`.
	ACTION	Contact Oracle Customer Support.
3521:ERROR	Convert FML32 buffer with subtype(<text>) failed!
	DESCRIPTION	The conversion of the buffer received from the remote host was unsuccessful.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3522:ERROR	Failed to tpalloc() FML32 buffer of size <number> for <text>!
	DESCRIPTION	An internal error has been detected in `gw_nw_decode`.
	ACTION	Contact Oracle Customer Support.
3523:ERROR	Fail to convert for FML buffer(<text>), exceeding limit!
	DESCRIPTION	Failed to convert the FML buffer; the buffer size required to process the conversion exceeds the limit.
	ACTION	Examine the application and the view for this buffer for any errors. If no errors are found, contact Oracle Customer Support.
3524:ERROR	Fail to convert for FML32 buffer(<text>), exceeding limit!
	DESCRIPTION	Failed to convert the FML32 buffer; the buffer size required to process the conversion exceeds the limit.
	ACTION	Examine the application and the view for this buffer for any errors. If no errors are found, contact Oracle Customer Support.
3525:ERROR	Fail to retrieve remote service definition!
	DESCRIPTION	Unable to find the remote service definition in shared memory.
	ACTION	Examine the DMCONFIG remote service definitions. Correct any errors found. If no error is found, contact Oracle Customer Support.
3526:ERROR	Fail to retrieve local service definition!
	DESCRIPTION	Unable to find the local service definition in shared memory.
	ACTION	Examine the DMCONFIG local service definitions. Correct any errors found. If no error is found, contact Oracle Customer Support.
3527:ERROR	Must specify subtype for <text>
	DESCRIPTION	The buffer type specified of VIEW, VIEW32, X_C_TYPE, or X_COMMON requires that a subtype be specified.
	ACTION	Correct any errors in the DMCONFIG buffer type definitions. If no errors are found, contact Oracle Customer Support.
3528:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_encode`.
	ACTION	Contact Oracle Customer Support.
3529:ERROR	Convert buffer type <text> with subtype <text> failed(rc=<number>)!
	DESCRIPTION	The conversion of the buffer received from Tuxedo was unsuccessful.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3530:ERROR	Convert buffer type <text> with subtype <text> failed(rc=<number>)!
	DESCRIPTION	The conversion of the buffer received from Tuxedo was unsuccessful due to the resulting size exceeding the maximum of 32767.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3531:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_encode`.
	ACTION	Contact Oracle Customer Support.
3532:ERROR	FML buffer type requires subtype to be specified!
	DESCRIPTION	The buffer type specified of FML requires that a subtype be specified.
	ACTION	Correct the DMCONFIG definition.
3533:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_encode`.
	ACTION	Contact Oracle Customer Support.
3534:ERROR	Convert FML buffer with subtype <text> failed(Ferror=<number>)!
	DESCRIPTION	The conversion of the FML buffer received from Tuxedo was unsuccessfulErrorerror is the return code from the FML conversion routine.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3535:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_encode`.
	ACTION	Contact Oracle Customer Support.
3536:ERROR	Convert FML buffer with subtype <text> failed(Ferror=<number>)!
	DESCRIPTION	The conversion of the FML buffer received from Tuxedo was unsuccessful. Ferror is the return code from the FML conversion routine.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3537:ERROR	Malloc buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected in `gw_nw_encode`.
	ACTION	Contact Oracle Customer Support.
3538:ERROR	FML32 buffer type requires subtype to be specified!
	DESCRIPTION	The buffer type specified of FML32 requires that a subtype be specified.
	ACTION	Correct the DMCONFIG definition.
3539:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected, `gw_nw_Alloc` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
3540:ERROR	Convert FML32 buffer with subtype <text> failed(Ferror=<number>)!
	DESCRIPTION	The conversion of the FML32 buffer received from Tuxedo was unsuccessful. Ferror is the return code from the FML conversion routine.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
3541:ERROR	Malloc temporary buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected, `gw_nw_Alloc` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
3542:ERROR	Convert FML32 buffer with subtype <text> failed(Ferror=<number>)!
	DESCRIPTION	The conversion of the FML32 buffer received from Tuxedo was unsuccessful. Ferror is the return code from the FML conversion routine.
	ACTION	Examine the application to determine if it has an error, examine the DMCONFIG definition for any errors in the buffer type specification. If no errors are found, contact Oracle Customer Support.
4000:ERROR	GP_SEND flow controlled for GPND <number>
	DESCRIPTION	An internal error has been detected, `gw_nw_proto_flow` has detected a flow control callback from `gp_send`.
	ACTION	Contact Oracle Customer Support.
4100:ERROR	Maximum number of pointers exceeded
	DESCRIPTION	An internal error has been detected. The maximum number of pointers has exceeded 500.
	ACTION	Contact Oracle Customer Support.
4124:ERROR	Unable to format CRM_acall
	DESCRIPTION	An internal error has been detected, CRM_acall has returned an error.
	ACTION	Contact Oracle Customer Support.
4125:ERROR	Unable to send data on sna_conv_idx <number>, gpnd = <number>
	DESCRIPTION	An error has occurred while sending acall data (`gw_nw_acall`) to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
4126:ERROR	Unable to format CRM_connect
	DESCRIPTION	An internal error has been detected, CRM_connect has returned an error.
	ACTION	Contact Oracle Customer Support.
4127:ERROR	Unable to send data on sna_conv_idx <number>, gpnd = <number>
	DESCRIPTION	An error has occurred while sending connect data (`gw_nw_connect`) to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
4128:ERROR	Unable to format CRM_send_data
	DESCRIPTION	An internal error has been detected, CRM_send has returned an error.
	ACTION	Contact Oracle Customer Support.
4130:ERROR
	DESCRIPTION	An internal error has been detected, CRM_connect_rsp has returned an error.
	ACTION	Contact Oracle Customer Support
5019:ERROR	Send event for RRCORR() failed!
	DESCRIPTION	An internal error has been detected, `gw_nw_SendEvent` has returned an error.
	ACTION	Contact Oracle Customer Support.
5020:ERROR	Encode ACALL_RSP failed, RRCORR(<number>)!
	DESCRIPTION	An internal error has been detected, CRM_acall_rsp has returned an error.
	ACTION	Contact Oracle Customer Support.
5021:ERROR	Encode reply failed!
	DESCRIPTION	An error was detected while attempting to encode the reply message data destined for the remote host.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5022:ERROR	Invalid network descriptor(<number>)!
	DESCRIPTION	The network descriptor this context is invalid.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5023:ERROR	Could not get transaction
	DESCRIPTION	Failed to associate a transactional ACALL service request to a transaction object. The most likely reasons for this failure are: The locally configured limit has been exceeded, or Memory allocation has failed to create the transaction object.
	ACTION	Determine if the application is licensed to do transactions. Examine the DMCONFIG file for the MAXTRAN parameter, this number is the limit. If MAXTRAN is not specified, then examine the ubbconfig file for the MAXGTT parameter. In the later case MAXGTT is the limit. Modify the limit if necessary. Verify that the remote domain MAXSYNCLVL is set to 2.
5024:ERROR	Could not get API
	DESCRIPTION	An internal error has been detected. The API information is invalid.
	ACTION	Contact Oracle Customer Support.
5025:ERROR	Could not get transaction
	DESCRIPTION	Failed to associate a transactional CONNECT service request to a transaction object. The most likely reasons for this failure are: The locally configured limit has been exceeded, or Memory allocation has failed to create the transaction object
	ACTION	Determine if the application is licensed to do transactions. Examine the DMCONFIG file for the MAXTRAN parameter, this number is the limit. If MAXTRAN is not specified, then examine the ubbconfig file for the MAXGTT parameter. In the later case MAXGTT is the limit. Modify the limit if necessary. Verify that the remote domain MAXSYNCLVL is set to 2.
5026:ERROR	Could not get API
	DESCRIPTION	An internal error has been detected. The API information is invalid.
	ACTION	Contact Oracle Customer Support.
5027:ERROR	Could not get API
	DESCRIPTION	An internal error has been detected. The API information is invalid.
	ACTION	Contact Oracle Customer Support.
5028:ERROR	Protocol violation, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5029:ERROR	Link status down for remote domain <text>
	DESCRIPTION	The link status returned by the CRM is LINK_DOWN.
	ACTION	Determine if the stack is active and check that the session between the stack provider and the remote host is active.
5030:ERROR	Link status pending for remote domain <text>
	DESCRIPTION	The link status returned by the CRM is LINK_PENDING. Transaction recovery for the link is still in progress following a restart. Only non-transactional requests may be sent to this link.
	ACTION	Wait until recovery is complete before requesting transactional services on this link.
5031:ERROR	Transaction not allowed, request rejected!
	DESCRIPTION	Failed to send a transactional ACALL request to the remote domain because MAXSYNCLVL is not 2.
	ACTION	Determine the following things: Oracle Tuxedo Mainframe Adapter for SNA Gateway is licensed for transactions. and DMCONFIG specifies MAXSYNCLVL=2 for the link.
5032:ERROR	Transaction not allowed, request rejected!
	DESCRIPTION	Failed to send a transactional CONNECT request to the remote domain because MAXSYNCLVL is not 2.
	ACTION	Determine the following things: Oracle Tuxedo Mainframe Adapter for SNA Gateway is licensed for transactions and DMCONFIG specifies MAXSYNCLVL=2 for the link.
5033:ERROR	Protocol violation, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5034:ERROR	Allocate context failed!
	DESCRIPTION	An internal error has been detected. An error was returned by `gw_nw_AllocNwCtx`.
	ACTION	Contact Oracle Customer Support.
5035:ERROR	Enter shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5036:ERROR	Invalid conversation identification, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_convsend`.
	ACTION	Contact Oracle Customer Support.
5037:ERROR	Unknown message type, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5038:ERROR	LINK_STATUS state error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5039:ERROR	Protocol violation, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5040:ERROR	Enter shutdown
	DESCRIPTION	An internal error has been detected, an error was returned by `gw_nw_getsncrm_idx`.
	ACTION	Contact Oracle Customer Support.
5041:ERROR	Trans Event Error shutdown
	DESCRIPTION	An internal error has been detected, an error was returned by `gw_nw_TranSetUpExtTmsEvent`.
	ACTION	Contact Oracle Customer Support.
5042:WARNING	SIGNON identify failed, shutdown Gateway!
	DESCRIPTION	CRM returned an error to the SIGNON request by Oracle Tuxedo Mainframe Adapter for SNA Gateway.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5044:ERROR	SIGNON state error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected, an error was returned by `_gw_nw_CRM_nextop`.
	ACTION	Contact Oracle Customer Support.
5045:ERROR	STARTUP state error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected, an error was returned by `_gw_nw_CRM_nextop`.
	ACTION	Contact Oracle Customer Support.
5046:WARNING	LINK_STATUS decode error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected. An error was returned by `CRM_linkstatus_rcv`.
	ACTION	Contact Oracle Customer Support.
5047:WARNING	LINK_STATUS status error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5048:WARNING	LINK_CONFIG state error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected, an error was returned by `_gw_nw_CRM_nextop`.
	ACTION	Contact Oracle Customer Support.
5049:WARNING	STACK_CONFIG state error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected, an error was returned by`_gw_nw_CRM_nextop`.
	ACTION	Contact Oracle Customer Support.
5050:WARNING	SHUTDOWN message received, shutdown Gateway!
	DESCRIPTION	`GWSNAX` has received a SHUTDOWN request from the CRM and will shut down immediately.
	ACTION	Examine the ULOG for more information concerning the reason for the shutdown.
5051:ERROR	LOG_DATA decode error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected. An error was returned by `CRM_log_data_rcv`.
	ACTION	Contact Oracle Customer Support.
5052:ERROR	LOG_DATA state error(<number>), shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5053:ERROR	Protocol violation, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`. Inbound ACALL request contained SEND_INVITE for function DPL.
	ACTION	Contact Oracle Customer Support.
5054:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected by `gw_nw_InBoundConnectRqst`.
	ACTION	Contact Oracle Customer Support.
5055:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected by `gw_nw_OutBoundConnectRsp`.
	ACTION	Contact Oracle Customer Support.
5056:ERROR	Protocol violation, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5057:ERROR	SEND_DATA decode error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5058:ERROR	Cannot create action to send remote disconnect
	DESCRIPTION	An internal error has been detected, an error was returned by `gw_new_action`.
	ACTION	Contact Oracle Customer Support.
5059:ERROR	ACALL decode error, shutdown Gateway!
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5060:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected by `gw_nw_InBoundAcallRqst`.
	ACTION	Contact Oracle Customer Support.
5061:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected by `gw_nw_OutBoundAcallRsp`.
	ACTION	Contact Oracle Customer Support.
5062:ERROR	Failed to find local service(<text>) definition!
	DESCRIPTION	Unable to find the local service definition for the inbound request.
	ACTION	Examine the DMCONFIG local service definitions. Correct any errors found. If no error is found, contact Oracle Customer Support.
5063:ERROR	Invalid link index
	DESCRIPTION	An internal error has been detected, an error was returned by `_gw_nw_set_link_idx`.
	ACTION	Contact Oracle Customer Support.
5064:ERROR	Invalid query_rsp index
	DESCRIPTION	An internal error has been detected by `gw_nw_QueryProcess`.
	ACTION	Contact Oracle Customer Support.
5065:ERROR	Enter shutdown
	DESCRIPTION	A failure has been detected while sending the CRM_QSVC_RSP verb to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Determine if the CRM process is still active.
5066:ERROR	Encode SEND_DATA failed, RRCORR(<number>)!
	DESCRIPTION	An internal error has been detected by `gw_nw_reply`.
	ACTION	Contact Oracle Customer Support.
5067:ERROR	Decode inbound ACALL request failed!
	DESCRIPTION	An error has occurred while decoding an inbound ACALL request in `gw_nw_decode`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5068:ERROR	Could not get FUNC
	DESCRIPTION	An internal error has been detected by `gw_nw_acall`.
	ACTION	Contact Oracle Customer Support.
5069:ERROR	Could not get FUNC
	DESCRIPTION	An internal error has been detected by `gw_nw_connect`.
	ACTION	Contact Oracle Customer Support.
5070:ERROR	SECURITY: Failed in security checking for RRCORR(<number>)!
	DESCRIPTION	Security checking failed for the inbound ACALL request. An error was returned by `gw_nw_SetSecurity`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5071:ERROR	BAD Transaction ID shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_SendData`.
	ACTION	Contact Oracle Customer Support.
5072:ERROR	BAD Transaction ID shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_OutBoundAcallRsp`.
	ACTION	Contact Oracle Customer Support.
5073:ERROR	Could not get API
	DESCRIPTION	An internal error has been detected by `gw_nw_QueryProcess`.
	ACTION	Contact Oracle Customer Support.
5074:ERROR	Decode outbound ACALL response failed, RRCORR(<number>)!
	DESCRIPTION	An error has occurred while decoding the response from the host application to an outbound ACALL.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5075:ERROR	Invalid query_rsp index
	DESCRIPTION	An internal error has been detected by `gw_nw_ConnectError`.
	ACTION	Contact Oracle Customer Support.
5077:ERROR	Enter shutdown
	DESCRIPTION	A failure has been detected while sending the CRM_QSVC_RSP verb to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Determine if the CRM process is still active.
5078:ERROR	Enter shutdown
	DESCRIPTION	A failure has been detected while sending the CRM_CONNECT_RSP verb to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure. Determine if the CRM process is still active.
5079:ERROR	BAD Transaction ID shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_InBoundAcallRqst`.
	ACTION	Contact Oracle Customer Support.
5080:ERROR	Decode inbound connect request failed, RRCORR(<number>)!
	DESCRIPTION	An error has occurred while decoding an inbound connect request in `gw_nw_InBoundConnectRqst`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5081:ERROR	SECURITY: Inbound connect request security check failed, RRCORR(<number>)!
	DESCRIPTION	Security checking failed for the inbound CONNECT request. An error was returned by `gw_nw_SetSecurity`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5082:ERROR	Decode SEND_DATA failed, RRCORR(<number>)!
	DESCRIPTION	An error has occurred while decoding an outbound send data request in `gw_nw_SendData`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5083:ERROR	Invalid buffer type, encode failed!
	DESCRIPTION	The buffer type specified for the outbound message was invalid. Oracle Tuxedo Mainframe Adapter for SNA Gateway only supports standard Tuxedo buffer types over the domain gateway.
	ACTION	Correct the DMCONFIG definition.
5084:ERROR	Outbound ACALL encode failed!
	DESCRIPTION	An error has occurred while encoding an outbound ACALL request in `gw_nw_encode`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5085:ERROR	BAD CRM_IDX shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_InBoundAcallRqst`.
	ACTION	Contact Oracle Customer Support.
5086:ERROR	BAD Context shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_InBoundAcallRqst`.
	ACTION	Contact Oracle Customer Support.
5087:ERROR	Invalid buffer type, decode failed!
	DESCRIPTION	The buffer type specified for the inbound message was invalid. Oracle Tuxedo Mainframe Adapter for SNA Gateway only supports standard Tuxedo buffer types over the domain gateway.
	ACTION	Correct the DMCONFIG definition.
5088:ERROR	Unable to get RDOM
	DESCRIPTION	An internal error has been detected by `gw_nw_init_env`.
	ACTION	Contact Oracle Customer Support.
5089:ERROR	BAD CRM_IDX shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_InBoundConnectRqst`.
	ACTION	Contact Oracle Customer Support.
5090:ERROR	Outbound CONNECT encode failed!
	DESCRIPTION	An error has occurred while encoding an outbound CONNECT request in `gw_nw_encode`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5091:ERROR	Outbound CONVSEND encode failed!
	DESCRIPTION	An error has occurred while encoding an outbound CONVSEND request in `gw_nw_encode`.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5093:ERROR	Bad Connect
	DESCRIPTION	An internal error has been detected by `gw_nw_crmrcv`.
	ACTION	Contact Oracle Customer Support.
5094:ERROR	Unable to send data on sna_conv_idx <number>, gpnd = <number>
	DESCRIPTION	An error has occurred while sending a connect response to the CRM.
	ACTION	Examine the ULOG for more information concerning the reason for the failure.
5095:ERROR	BAD Transaction ID shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_InBoundConnectRqst`.
	ACTION	Contact Oracle Customer Support.
5096:ERROR	Unable to obtain socket id
	DESCRIPTION	An internal error has been detected by `gw_nw_link_gp`.
	ACTION	Contact Oracle Customer Support.
5097:ERROR	Unable to get RDOM
	DESCRIPTION	An internal error has been detected by `gw_nw_link_gp`.
	ACTION	Contact Oracle Customer Support.
5098:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected by `gw_nw_link_gp`.
	ACTION	Contact Oracle Customer Support.
5099:ERROR	Allocate context failed!
	DESCRIPTION	An internal error has been detected, an error was returned by `gw_nw_AllocNwCtx`.
	ACTION	Contact Oracle Customer Support.
5100:ERROR	Unable to obtain socket id
	DESCRIPTION	An internal error has been detected by `gw_nw_init_env.`
	ACTION	Contact Oracle Customer Support.
5101:ERROR	Unable to find view file for <text> <text>
	DESCRIPTION	Failed to find the view file for the FML buffer type specified in the INBUFTYPE for an inbound request.
	ACTION	Examine the environment variables VIEWDIR, VIEWFILES, VIEW32DIR, and VIEW32FILES to determine if the requested view is present.
5102:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected by `gw_nw_reply`.
	ACTION	Contact Oracle Customer Support.
5103:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected by `gw_nw_reply`.
	ACTION	Contact Oracle Customer Support.
5104:ERROR	Invalid action index
	DESCRIPTION	An internal error has been detected by `gw_nw_QueryProcess`.
	ACTION	Contact Oracle Customer Support.
5105:ERROR	Invalid buffer pointer
	DESCRIPTION	An internal error has been detected by `gw_nw_encode`.
	ACTION	Contact Oracle Customer Support.
5106:ERROR	Allocate send buffer failed!
	DESCRIPTION	An internal error has been detected, an error was returned by `gw_nw_empty_sndbuf`.
	ACTION	Contact Oracle Customer Support.
5107:ERROR	Unable to get appkey for this outbound request
	DESCRIPTION	An internal error has been detected, `gw_shm_getbylink` returned an error while getting the remote domain entry.
	ACTION	Examine the DMCONFIG remote domain definitions and its security setting. Correct any errors found. If no error is found, contact Oracle Customer Support.
5108:ERROR	Enter shutdown
	DESCRIPTION	An internal error has been detected by `gw_nw_SendEvent`.
	ACTION	Contact Oracle Customer Support.
5109:ERROR	Unable to find view file for <text> <text>
	DESCRIPTION	Failed to find the view file for encoding outbound FML data as specified in the OUTBUFTYPE.
	ACTION	Examine the environment variables VIEWDIR, VIEWFILES, VIEW32DIR, and VIEW32FILES to determine if the requested view is present.
5110:ERROR	Unable to find view file for <text> <text>
	DESCRIPTION	Failed to find the view file for encoding outbound FML32 data as specified in the OUTBUFTYPE.
	ACTION	Examine the environment variables VIEWDIR, VIEWFILES, VIEW32DIR, and VIEW32FILES to determine if the requested view is present.
5111:ERROR	BAD Context shutdown caused at transaction associate
	DESCRIPTION	An internal error has been detected, an error was returned by `gw_nw_AssociateTranByTCTXT`.
	ACTION	Contact Oracle Customer Support.
5112:ERROR	System full, can't create action, Enter shutdown
	DESCRIPTION	Failed to create GWSNAX Gateway internal scheduled event to handle failure ore disconnect.
	ACTION	Either memory allocation failed or a system limit was reached. Contact Oracle Customer Support.
5113:ERROR	Realloc buffer of size(<number>) failed!
	DESCRIPTION	An internal error has been detected, `gw_nw_Realloc` was unable to allocate memory needed.
	ACTION	Contact Oracle Customer Support.
5114:ERROR	Invalid network descriptor(<number>)!
	DESCRIPTION	An internal error has been detected by `gw_nw_acall`.
	ACTION	Contact Oracle Customer Support.
5115:ERROR	Encryption setup failed, code <number>
	DESCRIPTION	An error has occurred while establishing link-level encryption with the CRM. -1:The processes are using different encryption types (ex. GPE) 6: The processes are using different versions of the encryption protocol. 7: The negotiation of an encryption level has failed. 8: A system error has occurred in the encryption setup
	ACTION	Verify that the setup of encryption on both sides of the link is correct. Verify that there are common encryption levels in the ranges specified on the process command lines. Verify that the correct encryption libraries are installed.
5116:ERROR	CRM authentication setup failed
	DESCRIPTION	An error has occurred while authenticating a CRM client.
	ACTION	Verify that the authentication file(s) for both the CRM and the client are set up correctly, and that both have correct access privileges. Verify that the authentication file is specified correctly on both command lines.
5117:INFO	Link encryption established, <text> bits
	DESCRIPTION	The SNAX has established link-level encryption with the CRM.
	ACTION	No action is required. If the encryption level specified does not match the desired value, verify the encryption level range specified on the SNAX and CRM command lines. A value of ‘40/56’ indicates that encryption is set at 56, even though the specified range may be as low as 40.
6004:ERROR	Fails to propagate USERID for inbound request, RRCORR(%lx)!
	DESCRIPTION	Fails to propagate USERID for inbound call.
	ACTION	Check the DMCONFIG and CICS security configuration to determine if it has an error, otherwise contact Oracle Customer Support.
6005:ERROR	Fails to propagate USERID for conversational inbound request, RRCORR(%lx)!
	DESCRIPTION	Fails to propagate `USERID` for conversational inbound call.
	ACTION	Check the DMCONFIG and CICS security configuration to determine if it has an error, otherwise contact Oracle Customer Support.
6006: ERROR	TDQ encoding failed
	DESCRIPTION	Fails to encode TDQ message.
	ACTION	Contact ORACLE Customer Support.
6007:ERROR	TDQ decoding failed
	DESCRIPTION	Fails to decode TDQ message.
	ACTION	Contact ORACLE Customer Support.
6008:ERROR	Fails to execute TDQ command
	DESCRIPTION	Fails to execute TDQ command.
	ACTION	Check ULOG for additional information.
6011:WARN	Input buffer is bigger than RECORD, received(%ld), configured RECORD length(%ld)
	DESCRIPTION	The `RECORD` buffer received of the size specified is smaller than the actual `RECORD` length configured.
	ACTION	Check the `DMCONFIG` to determine if it has an error, otherwise contact Oracle Customer Support.
6012:ERROR	Both `INBUFTYPE` and `OUTBUFTYPE` should be `RECORD`
	DESCRIPTION	The Gateway can't handle the case if `INBUFTYPE` and `OUTBUFTYPE` are not all `RECORD`.
	ACTION	Change both `INBUFTYPE` and `OUTBUFTYPE` to `RECORD`.
9001:ERROR		`<taskname>` timed out with failCode `<failcode>`
	DESCRIPTION	A conversation has timed out in the CRM with the stack return code of `<failcode>`. A timer event set to watch a conversation has expired. `<taskname>` may appear as: OB-Conversation #nn (`<linkref>`) tx #m `<tranname>`, or IB-Conversation #nn (`<linkref>`) tx #m `<tranname>` where: nn is an internal APPC conversation number and m is the transaction context where -1 signifies non-transactional. Outbound Conversation nnnn Link (`<linkref>`) TCTXT (tctxt) Tran (`<tranname>`), or Inbound Conversation nnnn Link (`<linkref>`) TCTXT (tctxt) Tran(`<tranname>`) where nnnn is the CRM Logical Task Number and tctxt is the transaction context, where FFFFFFFF indicates notn-transactional.
	ACTION	Examine `stderr` and the ULOG for additional information concerning the failure.
9002:ERROR	Unable to create APPC Server for <text>.
	DESCRIPTION	CRM was unable to instantiate the stack object due to an error.
	ACTION	Check for additional messages in stderr. The shared library for the stack or the stack interface might not have been loaded due to an incorrect library path.
9003:ERROR	Server Failed (`<stackref>`), Code = `<returncode>`
	DESCRIPTION	CRM received a bad return code from the stack start-up.
	ACTION	The `<returncode>` is the value returned by the SNA Stack software. Check the status of the stack, the configuration of the stack, and the gateway configuration. Note: Unless you started the CRM as a Tuxedo server, you must manually kill the CRM process.
9004:ERROR	Configuration change on link `<linkref>` requires cold start
	DESCRIPTION	Attempting to do a warm start after changing the domain configuration.
	ACTION	Change start type to COLD and restart.
9005:WARNING	Unrecovered transaction, TCTXT(`<text>`), blob dropped. Transaction presumed forgotten.
	DESCRIPTION	An attempt was make by Tuxedo to recover the specified transaction that was unknown by the CRM. It is presumed that it was already committed or aborted prior to the recovery attempt.
	ACTION	None. This message is for information only.
9006:ERROR	Unable to start the recovery task for link `<linkref>`
	DESCRIPTION	An error occurred during the warm start of Tuxedo.
	ACTION	Cold start the Tuxedo application.
9008:WARNING	Unknown tranid dropped, id=`<tctxt>`
	DESCRIPTION	Recovery was requested by Tuxedo on a transaction that was already forgotten by the CRM.
	ACTION	None. This message is for information only.
9009:ERROR	No blob with recovery request. Transaction dropped, id=`<tctxt>`
	DESCRIPTION	Attempting to warm start after the CRM's `BLOBLOG` has been modified.
	ACTION	Change start type to COLD and restart.
9010:ERROR	`<taskname>` failed with failCode `<failcode>`
	DESCRIPTION	A conversation has failed with the stack return code of `<failcode>`. `<taskname>` may appear as: Outbound Conversation nnnn Link `<linkref>` TCTXT (`<tctxt>`) Tran `<tranname>`, or Inbound Conversation nnnn Link `<linkref>` TCTXT (`<tctxt>`) Tran `<tranname>`, where: nnnn is the CRM Logical TAsk Number. tctxt is the transaction context where FFFFFFFF signifies non-transactional. Possible values for the `<failcode>`are: Communications - unable to create the APPCserver object. MemoryAllocation - internal error allocating memory. InvalidObject - a CRM object could not be created or has been made invalid by some previous error. InputOutput - error occurred during file I/O or an unexpected APPC return code was received. Registration - internal task cannot be registered
	ACTION	Examine `stderr` and the `ULOG` for additional information concerning the failure. For failcode Input/Output, verify that the user starting the CRM process has the proper file permissions for the `BLOBLOG` and `RSTRTLOG`. If no apparent error is found, contact Oracle Customer Support.
9011:ERROR	Attempt to connect as second master refused!
	DESCRIPTION	A second `GWSNAX` is attempting to connect to the CRM as a master gateway. Only one master gateway is allowed.
	ACTION	Ensure that multiple Tuxedo configurations do not use the same CRM address.
9012:ERROR	Attempt to connect as master in autonomous mode refused!
	DESCRIPTION	An attempt to connect to the CRM as a master gateway was made when the CRM was running in autonomous mode.
	ACTION	Ensure that multiple Tuxedo configurations do not use the same CRM address.
9013:ERROR	Attempt to connect with incorrect group name (`<groupname>`) refused!
	DESCRIPTION	The group name in the gateway configuration file does not match the group name specified in the CRM command line.
	ACTION	Correct the group name that is in error and restart.
9014:ERROR	INTERNAL ERROR: memory allocation failed [for new context/data buffer]
	DESCRIPTION	INTERNAL ERROR: memory allocation failed [for new context/data buffer]
	ACTION	Contact Oracle Customer Support.
9015:ERROR	INTERNAL ERROR: server registration failed
	DESCRIPTION	Internal error registering the APPC server. APPC libraries not found. The stack failed.
	ACTION	Contact Oracle Customer Support.
9016:ERROR	Link refers to undefined APPC stack (`<stackref>`)!
	DESCRIPTION	The `stackref` in the link configuration is incorrect.
	ACTION	Correct the `stackref` that is in error, run `dmloadcf`, and restart.
9017:ERROR	INTERNAL ERROR: link registration failed
	DESCRIPTION	Internal error registering the link. The stack failed.
	ACTION	Contact Oracle Customer Support.
9018:ERROR	Invalid Transition <additional information>
	DESCRIPTION	An internal state table failure has occurred. The `<additional information>` will be one of the following: From `<oldstate>` to `<newstate>` for `<dir>`-bound transaction TCTXT `<tid>` To `<newstate>` for inbound transaction TCTXT `<tid>` To `<newstate>` for outbound transaction TCTXT `<tid>`
	ACTION	Contact Oracle Customer Support.
9019:ERROR	Unknown Service Correlator = `<correlator>`, message dropped
	DESCRIPTION	Internal error assigning service correlator values. Message context lost.
	ACTION	Contact Oracle Customer Support.
9020:ERROR	Duplicate Service Correlator = `<correlator>`
	DESCRIPTION	Internal error assigning service correlator values.
	ACTION	Contact Oracle Customer Support.
9021:ERROR	Invalid Remote Link Name `<linkref>`
	DESCRIPTION	The remote link name in a request does not match any defined link name.
	ACTION	Correct the gateway configuration and restart.
9022:ERROR	Invalid transaction context = `<tctxt>`
	DESCRIPTION	Internal error assigning transaction context values. Bad transaction.
	ACTION	Contact Oracle Customer Support.
9023:ERROR	Unknown Service Correlator = `<correlator>`, message dropped
	DESCRIPTION	Internal error assigning service correlator values. Message context lost.
	ACTION	Contact Oracle Customer Support.
9024:ERROR	Invalid initial syncpoint received from subordinate, `TCTXT`(<text>)
	DESCRIPTION	Syncpoint processing protocol violation. Subordinate member of conversation attempted to initiate a syncpoint. XA does not support syncpoints from subordinate members.
	ACTION	Contact Oracle Customer Support.
9025:ERROR	Invalid Input Message Discarded
	DESCRIPTION	Internal error, bad message sent between GWSNAX and CRM. Possibly incompatible Oracle Tuxedo Mainframe Adapter for SNA Gateway and CRM.
	ACTION	Contact Oracle Customer Support.
9026:ERROR	CNOS Notification Received for unknown partner `<partnerLU>`
	DESCRIPTION	Multiple instances of the CRM may be using the same local LU.
	ACTION	Ensure that multiple Tuxedo configurations do not use the same local LU.
9027:WARNING	Remote Stop Received for `<linkref>`
	DESCRIPTION	The remote host has issued a stop for the specified link.
	ACTION	None. This message for information only.
9028:WARNING	Remote Start Received for `<linkref>`
	DESCRIPTION	The remote host has issued a start for the specified link.
	ACTION	None. This message for information only.
9029:ERROR	Undefined Remote LU on link `<linkref>`
	DESCRIPTION	The remote LU does not exist as defined.
	ACTION	Check the gateway configuration file and the stack configuration and correct the mis-match.
9030:ERROR	Unable to start session on link `<linkref>`. Reason=`<reason>`
	DESCRIPTION	Link activation failure due to SNA error.
	ACTION	`<reason>` is the description of the stack return code. Determine the cause and correct.
9031:ERROR	Unable to initialize link `<linkref>`. Reason=`<reason>`
	DESCRIPTION	Link initialization failure due to SNA error.
	ACTION	`<reason>` is the description of the stack return code. Determine the cause and correct.
9032:ERROR	No Available Session on link `<linkref>` for context `<correlator>`
	DESCRIPTION	Max sessions has been exceeded.
	ACTION	Check session limits in gateway configuration, stack configuration, CICS or VTAM. Increase if necessary.
9033:ERROR	Requested Synclevel not supported by link `<linkref>` for context `<correlator>` (synclevel `<level>`)
	DESCRIPTION	Attempted to issue a request at sync level `<level>` on a link that does not support that level.
	ACTION	Correct application or gateway configuration.
9034:ERROR	Service Request at SyncLevel=2 Rejected on PENDING link `<linkref>` for context `<correlator>`
	DESCRIPTION	An attempt to start a new sync level 2 request has been received and the Link is currently processing recovery information.
	ACTION	Wait until recovery is complete to request sync level 2 services.
9035:ERROR	Inbound Request Transform Failed (`<status>`) for context `<correlator>`
	DESCRIPTION	An error has occurred while processing the CICS transform for an inbound DPL request. This normally occurs when the API entry in the gateway configuration for the local service specifies CICS instead of ATMI.
	ACTION	Check gateway configuration for incorrect specification of local service API entry.
9036:ERROR	Inbound Response Transform Failed (`<status>`) for context `<correlator>`
	DESCRIPTION	An error has occurred while processing the CICS transform for an inbound DPL response. This normally occurs when the API entry in the gateway configuration for the local service specifies CICS instead of ATMI.
	ACTION	Check gateway configuration for incorrect specification of local service API entry.
9037:ERROR	Outbound Request Transform Failed (`<status>`) for context `<correlator>`
	DESCRIPTION	An error has occurred while processing the CICS transform for an outbound DPL request. This normally occurs when the API entry in the gateway configuration for the remote service specifies CICS instead of ATMI.
	ACTION	Check gateway configuration for incorrect specification of local service API entry.
9038:ERROR	Outbound Response Transform Failed (`<status>`) for context `<correlator>`
	DESCRIPTION	An error has occurred while processing the CICS transform for an outbound DPL response. This normally occurs when the API entry in the gateway configuration for the remote service specifies CICS instead of ATMI.
	ACTION	Check gateway configuration for incorrect specification of local service API entry.
9039:ERROR	Conversation terminated without confirm for context `<correlator>`
	DESCRIPTION	Sync level 2 conversation was terminated with out confirm.
	ACTION	Check application program and correct.
9040:ERROR	Inbound Confirm not supported
	DESCRIPTION	Host application is requesting an inbound confirm. This is not supported.
	ACTION	Check host application program and correct.
9041:ERROR	Inbound Confirm for multi-ISRT not supported
	DESCRIPTION	Host IMS application is requesting an inbound confirm and using multiple ISRT commands. This is not supported.
	ACTION	Check host application program and correct.
9043:ERROR	Missing send last from host (ATMI request/response) for context `<correlator>`
	DESCRIPTION	Host application did not issue send last during an outbound request/response service. The host application may have abounded.
	ACTION	Check application program and correct.
9044:ERROR	DPL program abounded with CICS code `<abendcode>`, program=`<progname>`
	DESCRIPTION	The specified host DPL program has abounded with the code specified.
	ACTION	None. This message is for information only.
9045:ERROR	DPL program failed with CICS code `<eibrcode>`, program=`<progname>`
	DESCRIPTION	The specified host DPL program has failed with the `eibrcode` specified.
	ACTION	None. This message is for information only.
9046:ERROR	Invalid combination for Service Context `<correlator>`, `<combination>`
	DESCRIPTION	The specified is invalid. It will be one of the following: Sync-Level, function, and API Function and API
	ACTION	Examine the gateway configuration and make corrections.
9047:ERROR	Sequence number error for Service Context <correlator>, sedan <seqno>
	DESCRIPTION	There has been a sequence number failure for the specified context. Context is out of sequence.
	ACTION	Contact Oracle Customer Support
9048:ERROR	Invalid conversation task for Service Context `<correlator>`, task=`<task>`
	DESCRIPTION	The conversation has already been terminated.
	ACTION	Contact Oracle Customer Support.
9049:ERROR	Invalid task switch for Service Context `<correlator>`, from `<task1>` to `<task2>`
	DESCRIPTION	An internal protocol violation has occurred.
	ACTION	Contact Oracle Customer Support.
9050:ERROR	Transformer creation failed for inbound transaction `<trancode>`
	DESCRIPTION	An internal error has occurred. Possibly out of memory.
	ACTION	Contact Oracle Customer Support.
9051:ERROR	Transformer failed for inbound transaction `<trancode>`
	DESCRIPTION	An internal error has occurred. Resource name is not present. Mainframe compatibility problem.
	ACTION	Contact Oracle Customer Support.
9052:WARNING	Inter-task Message dropped (`<verbname>`), farm=`<parm>` From: `<task1>` to `<task2>`
	DESCRIPTION	An internal message between two tasks has been dropped.
	ACTION	None. This message is for information only.
9053:ERROR	Attempt to send <`nnnnn`> bytes (> 32767)
	DESCRIPTION	The length of a send request exceeded 32767 (including overhead).
	ACTION	Check application program and correct.
9054:ERROR	Allocation Failure for `<trancode>` on `<remotesysid>`:`<error>`
	DESCRIPTION	An Allocation error occurred.
	ACTION	The reason for the failure is described by <error>. Correct problem with configuration or application.
9055:ERROR	Invalid Exchange Logs GDS variable received from `<remotesysid>`
	DESCRIPTION	The log files for the CRM have been incorrectly modified.
	ACTION	Run CRMLOGS to examine the CRM log file. Cold start the Tuxedo application.
9056:ERROR	Invalid cold start received from `<remotesysid>`. Unrecoverable local transactions are pending.
	DESCRIPTION	Attempting to cold start host while warm starting Tuxedo.
	ACTION	Run `CRMLOGS` to examine the CRM log file. Cold start the Tuxedo application.
9057:ERROR	Invalid warm start received from `<remotesysid>`. Unknown log name.
	DESCRIPTION	The log files for the CRM have been incorrectly modified.
	ACTION	Run `CRMLOGS` to examine the CRM log file. Cold start the Tuxedo application.
9058:ERROR	Invalid Compare States GDS variable received from `<remotesysid>`
	DESCRIPTION	The log files for the CRM have been incorrectly modified.
	ACTION	Run `CRMLOGS` to examine the CRM log file. Cold start the Tuxedo application.
9059:ERROR	Mixed Heuristic on link `<linkref>` for `<unitofwork>` Corrector [<correlator>]
	DESCRIPTION	One side has reported committed while the other side has reported aborted.
	ACTION	Check the `ULOG` for any additional messages.
9060:WARNING	Inbound Exchange Logs Rejected for <`remotesysid`>
	DESCRIPTION	Link not configured for sync level 2.
	ACTION	None. This message is for information only.
9061:WARNING	Link `<linkref>` not configured for sync level 2
	DESCRIPTION	Link specified by `<linkref>` is not configured for sync level 2.
	ACTION	None. This message is for information only.
9062:ERROR	Exchange Logs Rejected for `<remotesysid>`, Restart Type or Log Name Mismatch
	DESCRIPTION	The log files for the CRM have been incorrectly modified.
	ACTION	Run CRMLOGS to examine the CRM log file. Cold start the Tuxedo application.
9063:ERROR	Exchange Logs failed with `<linkref>`
	DESCRIPTION	An error occurred during the exchange logs process.
	ACTION	Run CRMLOGS to examine the CRM log file. Cold start the Tuxedo application.
9064:ERROR	Invalid initial syncopate received from subordinate, `<text>`
	DESCRIPTION	An internal error has occurred during the commit process. XA does not support syncopates originating from subordinate members.
	ACTION	Contact Oracle Customer Support
9069 ERROR	CRM encryption setup failed
	DESCRIPTION	An error has occurred while establishing link-level encryption with the CRM.
	ACTION	Verify that the setup of encryption on both sides of the link is correct. Verify that there are common encryption levels in the ranges specified on the process command lines. Verify that the correct encryption libraries are installed.
9072 ERROR	Attempted access by unauthorized CRM client
	DESCRIPTION	A client has attempted to access the CRM without the proper authentication or encryption setup.
	ACTION	Verify that the client should have access to the CRM. Verify that encryption is set up correctly in both the CRM and the client, and that the correct security add-on packages are installed. Verify that the authentication file is set up correctly, and that both the CRM and the client have correct access privileges.
9073 ERROR	CRM authentication setup failed
	DESCRIPTION	An error has occurred while authenticating a CRM client.
	ACTION	Verify that the authentication file(s) for both the CRM and the client are set up correctly, and that both have correct access privileges. Verify that the authentication file is specified correctly on both command lines.
9074 ERROR	CRM Logical Unit%s is probably inactive or unconsidered
	DESCRIPTION	An error has occurred while connecting to the APPC stack.
	ACTION	Verify that the CRM Logical Unit name is correct and is defined and active in both the stack and VTAM configuration.
9075 WARNING	WARN: Synclevl on link %s
	DESCRIPTION	The configured Synclevel could not be negotiated.
	ACTION	Verify that the Remote LU is configured for the correct synclevel.
9076 ERROR	CRM Logical Unit %s is probably the wrong type
	DESCRIPTION	An error has occurred while connecting to the APPC stack.
	ACTION	Verify that the CRM Logical Unit is correctly configured.
9077 ERROR	CRM Logical Unit %s is already in use
	DESCRIPTION	An error has occurred while connecting to the APPC stack.
	ACTION	Verify that the CRM Logical Unit is not in use by another application.
9079 ERROR	CRM client message rejected -- incompatible software/protocol version (CRMAPI RC=%s)
	DESCRIPTION	A CRM client has attempted to communicate with the CRM, but the client is at a software version level that is incompatible with and unsupported by the CRM.
	ACTION	The CRM rejects the message and terminates the connection. Check the version levels of the CRM and the client to ensure compatiblity.
9080 ERROR	Gateway Signon request rejected -- CRM disconnect in progress
	DESCRIPTION	The CRM is in the process of stopping all links and de-configuring, and is not able to accept a new Signon request at this time.
	ACTION	The Signon request is rejected. When the CRM has completed disconnect processing and returned to the reset state, retry the Signon request.
9081 ERROR	Failure occurred during Rollback of %s, remote resources may not be backed out
	DESCRIPTION	An Error occurred while performing BACKEDOUT processing. Remote resources may not be backed out.
	ACTION	Check mainframe application transaction logs to determine the cause and take the appropriate action.
9082 INFO	Unable to determine if the transaction was committed on the partner side, possible heuristic situation
	DESCRIPTION	Failed to determine the state of the global transaction due to a partial resynchronization.
	ACTION	Examine the CRM traces for more information concerning the reason for the failure. Check the CICS logs to see the transaction status.
9085:ERROR	Create Tuxedo SSL context failed
	DESCRIPTION	The Gateway failed to create Tuxedo SSL context.
	ACTION	Contact Oracle Customer Support.
9086: ERROR	SSL handshake failed, errno=%d [%s]
	DESCRIPTION	The Gateway failed to shake hands with SSL peer.
	ACTION	Contact Oracle Customer Support.
9087:ERROR	Get SSL Data failed
	DESCRIPTION	The Gateway failed to get SSL data.
	ACTION	Contact Oracle Customer Support.
9088:ERROR	SNACRM Message Buffer Invalid
	DESCRIPTION	The Gateway failed to get crm message buffer.
	ACTION	Contact Oracle Customer Support.
9089:ERROR	Wrong SSL cipher suit range
	DESCRIPTION	The Gateway failed to parse SSL max and min cipher suit.
	ACTION	The minimum key length used in the TLS cipher suite is 128, and the maximum key length is 256.
9090:ERROR	Set TCP option failed(%d)
	DESCRIPTION	The Gateway could not set TCP socket option.
	ACTION	Contact Oracle Customer Support.
9091:ERROR	When environment variable TM_ALLOW_NOTLS is not set, a TLS connection must be specified
	DESCRIPTION	The server needs TM_ALLOW_NOTLS set to use encryption other than TLS.
	ACTION	Set TM_ALLOW_NOTLS to y in order to use encryption other than TLS.