Creating a Network Source

Create a network source in IAM to restrict the set of IP ranges from which users can sign in.

  1. On the Network Sources list page, select Create Network Source. If you need help finding the network sources list page, see Listing Network Sources.
  2. Enter the following information:
    • Name: Enter a unique name for the network source. The name must be unique in the tenancy. You can't change this later. Avoid entering confidential information.
    • Description: A friendly description. You can change this later.
    • Networks: Select one of the following network types:
      • Virtual Cloud Network: Enter the following information for this option:
        • Select VCN: Find the VCN that you want to allow. If needed, select Change Compartment to find a VCN in a different compartment.

        • IP Address/CIDR Block: Enter an IP address from the VCN or a subnet CIDR block. For example: 10.0.0.0/16 or 10.0.0.4.

          To allow all subnets from the specified VCN, enter 0.0.0.0/0.

          Select + Another IP Address/CIDR Block to add another allowed address or range from the same VCN.

      • Public Network: For IP Address/CIDR Block, enter a specific IP address or CIDR block range. For example: 192.0.2.143.

        Select + Another IP Address/CIDR Block to add another allowed address or range.

  3. network sources list page, see Listing Compartments.
  1. To add more IP ranges to this network source, select + Add network.
  2. To add tags to the network resource, select Show advanced options.

    If you have permissions to create a resource, then you also have permissions to apply free-form tags to that resource. To apply a defined tag, you must have permissions to use the tag namespace. For more information about tagging, see Resource Tags. If you're not sure whether to apply tags, skip this option or ask an administrator. You can apply tags later. You can apply tags later.

  3. Optionally, to immediately create another network source, select Create another network source.
  4. When finished, select Create.