This feature, which supported peer-to-peer TCP connections for peers behind NATs, enabling Message Session Relay Protocol (MSRP) clients to communicate with one another, is not supported.

Note that your can still accomplish this function using MSRP B2BUA.

Telnet is not supported. Use SSH for network access to OCSBC management.

Note that references to Telnet and FTP are still present in the S-CZ8.0.0 documentation set because those terms are still used in the ACLI.

For example, the telnet-timeout parameter persists in the guide because it persists in system-config. In the absence of Telnet support, the telnet-timeout parameter now sets the SSH timeout.

The management command is not supported, and removed from the ACLI.

The media-manager-config's dynamic-trusted-drop-threshold feature is not supported, and the parameter is removed from the ACLI.

This version of software does not support the Acme Packet 3820 and the Acme Packet 4500 platforms.

The phy-interface's phy-link redundancy feature, which was available on the Acme Packet 3820 and 4500 platforms, is not supported. The parameter is also removed from the ACLI.

The access-control's minimum-reserved-bandwidth feature, which was available on the Acme Packet 3820 and 4500 platforms, is not supported.

• TLS_DHE_RSA_WITH_DES_CBC_SHA
• TLS_RSA_WITH_DES_CBC_SHA
• TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA

Within the context of the OCSBC's comprehensive SNMPv3 support, the secure-traps value is removed from the snmp-agent-mode parameter.

In addition, the elimination of secure-traps means that the following protocols are deprecated for use by SNMP:

• DES privacy protocol
• MD5 and SHA authentication protocols

The OCSBC deprecates the following ciphers, adhering to recent OpenSSL changes intended to eliminate weak ciphers:

• All DES-CBC ciphers, including:
  • TLS_DHE_RSA_WITH_DES_CBC_SHA
  • TLS_RSA_EXPORT1024_WITH_DES_CBC_SHA

The user should remove any prior Oracle Communications Session Border Controller version configuration that used these ciphers, and not configure a security profile with the expectation that these ciphers are available. Note also that TLS profiles using the ALL (default) value to the cipher-list parameter no longer use these ciphers.

The OCSBC's FTP Server is not supported.

Only FTP client services are supported. For example, FTP client service for HDR/CDR push is supported.

Note that both the SFTP client and server are supported.

MGCP Signaling is not supported.

The SIP Monitor & Trace and WebGUI features are not supported.

The source routing feature as configured by system-config, source-routing is not supported.

Please review the HIP information in the Network Interface section in the System Configuration chapter of the ACLI Configuration guide for background on accessing OCSBC Administrative Applications over media Interfaces.

The Border Gateway and H.248 functionality are not supported.

HMR operations on the Call-ID: header are not supported.

Session Replication for Recording is not supported.

Multimedia Internet KEYing (MIKEY) for SRTP

• VERINT support
• P-DCS-LAES support
• LI complex call flow support - SS8 & Verint
• SDP and CCC IP address and Port number matching for SS8/Verint variants

(Note that it is available in the Oracle Enterprise Session Border Controller.)

• DTMF IWF for H.323
• Media hairpinning involving H.323 and SIP

Linksys SRTP is not supported.