Recommended Cables for a MICROS RS422 ION Network

This sections lists the specifications for the RS422 cabling used for IDN printing devices. For sites not using metal conduit, ensure the cable is shielded appropriately. It is also acceptable to use a shielded Category 6 or better cable.

The following cables are recommended for MICROS RS422 IDN Networks:

• Shielded RS422 Cable (MICROS PN 300319-036-PT)

• Unshielded RS422 Cable (MICROS PN 300319-001-PT)

The following cables are MICROS-approved RS422 IDN equivalents:

• Shielded Cable with PVC Insulation:

• Belden 9829

• Olympic 3929

• Manhattan 3980

• Carol C0829

• Shielded Cables with Teflon Insulation:

• Belden 89855

• Berk Tek 256133

• Olympic 6173T

• Non-Shielded Cables with PVC Insulation:

• Belden 8444

• Olympic 2998

• All CAT6 or better UTP or STP cable that meets the ANSI/EIA/TIA- 568-A/B specifications and has a PVC jacket.

• Non-Shielded Cables with Teflon Insulation

• Belden 89729, 88444

• Olympic 2998T

• All CAT6 or better UTP or STP cable that meets the ANSI/EIA/TIA- 568-A/B specifications and has a Teflon jacket.