Cash Drawer 1 and 2 Connectors
All MICROS Workstations contain a pair of the connectors shown in the figure below.
Figure 33-5 MICROS 4-Pin DIN Cash Drawer Connectors
The Series 2 Cash Drawer connector is an 8-pin Mini-IDN. This pair of Cash Drawer connectors is used by the Workstation 6 and the Base Station.
Figure 33-6 8-Pin Mini-DIN (Series 2) Cash Drawer Connector
The following table describes the signal name and function of each pin:
Table 33-1 Series 2 Cash Drawer Pin and Signal Reference
| Pin # | Signal name | Description |
|---|---|---|
|
1 |
VCC12 or VCC24 |
Cash Drawer power |
|
2 |
CD_OPEN |
Open drawer |
|
3,7,8 |
Ground |
Signal grounds |
|
4 |
CD_ST |
Input status from cash drawer |
|
5 |
MCU_TX_5V |
Tx data to Cash Drawer |
|
6 |
MCURX |
Rx data from Cash Drawer |
Parent topic: Connectors