CLI Command Modes

The following table lists the configuration modes used in this document with their access and exit methods.

Command Mode	Access Method	Prompt	Exit Method
User EXEC	Access SEFOS from Oracle ILOM with read-only rights (privilege level 1).	`SEFOS>`	Use logout or exit to return to the Oracle ILOM prompt.
Privileged EXEC	Access SEFOS from Oracle ILOM with full administrative rights (privilege level 15).	`SEFOS#`	Use the `logout` or `exit` command to return to the Oracle ILOM prompt.
Global Configuration	From Privileged EXEC mode, use the `configure terminal` command.	`SEFOS(config)#`	Use the `end` command to return to Privileged EXEC mode.
Interface Configuration	From Global Configuration mode, use the `interface` interface-type interface-id command.	`SEFOS(config-if)#`	Use the `exit` command to return to Global Configuration mode, or use the `end` command to return to Privileged EXEC mode.
VRRP Router Configuration	From Global Configuration mode, use the `router vrrp` command.	`SEFOS(config-vrrp)#`	Use the `exit` command to return to Global Configuration mode, or use the `end` command to return to Privileged EXEC mode.
VRRP Interface Configuration	From VRRP Router Configuration mode, use the command `interface vlan` vlan-id command.¹	`SEFOS(config-vrrp-if)#`	Use the `exit` command to return to Global Configuration mode, or use the `end` command to return to Privileged EXEC mode.

¹VRRP is not supported on the Sun Blade 6000 Ethernet Switched Network Express Module 24p 10GbE.

Skip Navigation Links
Exit Print View
	Sun Ethernet Fabric Operating System IPv6 Administration Guide