Configuring Static VLAN Entries - Sun Ethernet Fabric Operating System

Skip Navigation Links
Exit Print View
	Sun Ethernet Fabric Operating System VLAN Administration Guide

Oracle Technology Network

Document Information

Using This Documentation

Related Documentation

Acronyms and Abbreviations

CLI Command Modes

Support and Accessibility

Protocol Description

VLAN Configuration

Configuration Guidelines

Default Settings

Configuring Static VLAN Entries

Create Member Ports

Create Forbidden Ports

Viewing VLAN Information

Retrieve the VLAN Summary

Retrieve the Configuration Details for all of the VLANs on a Switch

Retrieve the Configuration Details of a particular VLAN on the Switch

Configure a Static Unicast Entry

Configure a Static Multicast Entry

Configure Dynamic VLAN Learning

Configure Dynamic Multicast Learning

Configure Restricted VLAN Registration

Configure Restricted Group Registration

Configuring QinQ

Enable Tunneling on a Port

Enable STP Packet Tunneling

Configuring Service Classes and Expedited Traffic

Map a Priority to Traffic Class

Configuring Port Filtering

Configure the Acceptable Frame Type

Configure Ingress Filtering

Flow-Based Configuration

Flow-Based Example Topologies

Example Topolgy 1

Example Topolgy 2

Example Topolgy 3

Configuring Static Unicast and Multicast Entries

Configure Static Unicast Entry in Topology 1

Configure Static Unicast Entry in Topology 2

Configuring GVRP

Configure VGRP for Topology 1

Configure VGRP for Topology 2

Configure VLANs on the Nonroot Bridge

Configure Restricted VLAN Registration

Configure Restricted Group Registration

Create Acceptable Frame Types

Configure Ingress Filtering

Configuring Static VLAN Entries

You can configure static VLAN entries with the required number of member ports, untagged ports, and forbidden ports.

Copyright © 2010, 2011, Oracle and/or its affiliates. All rights reserved. Legal Notices

Previous

Next