Listing of sczbt_config

#
# Copyright 2012 Oracle Corporation.  All rights reserved.
# Use is subject to license terms.
#
# ident    "@(#)sczbt_config    1.5    08/04/17"
#
# This file will be sourced in by sczbt_register and the parameters
# listed below will be used.
#
# These parameters can be customized in (key=value) form
#
#               RS - Name of the resource
#               RG - Name of the resource group containing RS
#     PARAMETERDIR - Name of the parameter file direcrory
#       SC_NETWORK - Identifies if SUNW.LogicalHostname will be used
#            true = zone will use SUNW.LogicalHostname 
#                   false = zone will use it's own configuration 
#
#        NOTE: If the ip-type keyword for the non-global zone is set
#              to "exclusive", only "false" is allowed for SC_NETWORK
#
#    The configuration of a zone's network addresses depends on
#      whether you require IPMP protection or protection against
#      the failure of all physical interfaces.
#
#    If you require only IPMP protection, configure the zone's 
#      addresses by using the zonecfg utility and then place the
#      zone's address in an IPMP group. 
#
#          To configure this option set 
#          SC_NETWORK=false
#          SC_LH=Name of the SC Logical Hostname resource
#
#    If IPMP protection is not required, just configure the 
#      zone's addresses by using the zonecfg utility. 
#
#          To configure this option set 
#          SC_NETWORK=false
#          SC_LH=Name of the SC Logical Hostname resource
#
#    If you require protection against the failure of all physical
#      interfaces, choose one option from the following list. 
#
#    - If you want the SUNW.LogicalHostName resource type to manage
#        the zone's addresses, configure a SUNW.LogicalHostName
#        resource with at least one of the zone's addresses. 
#    
#          To configure this option set 
#          SC_NETWORK=true
#          SC_LH=Name of the SC Logical Hostname resource
#
#    - Otherwise, configure the zone's addresses by using the 
#        zonecfg utility and configure a redundant IP address
#        for use by a SUNW.LogicalHostName resource. 
#
#          To configure this option set 
#          SC_NETWORK=false
#          SC_LH=Name of the SC Logical Hostname resource
#
#    Whichever option is chosen, multiple zone addresses can be 
#       used either in the zone's configuration or using several
#      SUNW.LogicalHostname resources.
#
#       e.g.    SC_NETWORK=true
#          SC_LH=zone1-lh1,zone1-lh2
#
#            SC_LH - Name of the SC Logical Hostname resource
#         FAILOVER - Identifies if the zone's zone path is on a 
#                      highly available local file system
#
#      e.g.    FAILOVER=true - highly available local file system
#          FAILOVER=false - local file system
#
#           HAS_RS - Name of the HAStoragePlus SC resource
#

RS=
RG=
PARAMETERDIR=
SC_NETWORK=
SC_LH=
FAILOVER=
HAS_RS=

#
# The following variable will be placed in the parameter file
#
# Parameters for sczbt (Zone Boot)
#
# Zonename      Name of the zone
# Zonebrand    Brand of the zone. Current supported options are
#        "solaris" (default) or "solaris10"
# Zonebootopt   Zone boot options ("-s" requires that Milestone=single-user)
# Milestone     SMF Milestone which needs to be online before the zone is
#        considered booted. This option is only used for the
#        "solaris" Zonebrand.
# LXrunlevel    Runlevel which needs to get reached before the zone is
#        considered booted. This option is only used for the "lx"
#        Zonebrand.
# SLrunlevel    Solaris legacy runlevel which needs to get reached before the
#        zone is considered booted. This option is only used for the
#        "solaris8" or "solaris9" Zonebrand.
# Mounts     Mounts is a list of directories and their mount options, 
#        which are loopback mounted from the global zone into the 
#        newly booted zone. The mountpoint in the local zone can 
#        be different to the mountpoint from the global zone.
#
#        The Mounts parameter format is as follows,
#
#        Mounts="/global zone directory:/local zone directory:mount options"
#
#        The following are valid examples for the "Mounts" variable
#
#        Mounts="/globalzone-dir1:/localzone-dir1:rw"
#        Mounts="/globalzone-dir1:/localzone-dir1:rw /globalzone-dir2:rw"
#
#        The only required entry is the /global zone directory, the
#        /local zone directory and mount options can be omitted.
#
#        Omitting /local zone directory will make the local zone
#        mountpoint the same as the global zone directory.
#
#        Omitting mount options will not provide any mount options
#        except the default options from the mount command.
#    
#        Note: You must manually create any local zone mountpoint
#              directories that will be used within the Mounts variable,
#              before registering this resource within Solaris Cluster.
#

Zonename=""
Zonebrand="solaris"
Zonebootopt=""
Milestone="multi-user-server"
LXrunlevel="3"
SLrunlevel="3"
Mounts=""