Corporate Info  |  News  |  Solutions  |  Products  |  Partners  |  Services  |  Events  |  Download  |  How To Buy
	e-docs.beasys.com   |   Site Map   |   Search   |   PDF Files   |   Contact   |   Glossary
WLE Doc Home   |   Messages   |   Catalog List   |   Previous   |   Next

LIBORBCMD Messages 0-99

2	ERROR: Bad UUID `UUID'.
	Description	The specified UUID is invalid (for example, has illegal characters, has too many characters, has an invalid format, and so on).
	Action	Verify the UUID.
3	ERROR: Bad object name: `ObjectName'.
	Description	The specified object name is not a valid WLE object name (for example, has illegal characters, is too long, has an invalid format, or does not exist).
	Action	Specify a valid WLE object name.
4	ERROR: Bad type `DataType' for argument.
	Description	The data type specified for an argument is not a supported WLE argument data type.
	Action	Specify a valid WLE argument data type.
5	ERROR: Object not deleted.
	Description	For a DELETE REPOSITORY_OBJECT operation, the object was not deleted.
	Action	For more information, see any additional messages.
6	ERROR: Not yet implemented.
	Description	The specified operation is not yet implemented.
	Action	None.
7	ERROR: Object `ObjectName' is damaged.
	Description	The specified object is damaged.
	Action	Verify the object and reload if necessary.
8	ERROR: Bad object type for object `ObjectName'.
	Description	For a SHOW REPOSITORY operation, the object type for the specified object is invalid.
	Action	Reload the object definition.
9	ERROR: Object `ObjectName' not found.
	Description	The specified object was not found.
	Action	Verify the object name and the repository specification.
10	FATAL: Definition file `Filename' contained one or more errors; object(s) not loaded.
	Description	The definition file for the LOAD operation contained errors.
	Action	Because this message is typically displayed immediately after one or more other messages, refer to the previous messages that are displayed to determine the nature of the problem.
11	FATAL: Fatal syntax error.
	Description	A syntax error occurred while the definition file was being parsed.
	Action	Verify the syntax at the designated point in the definition file.
12	FATAL: Unsupported language `LanguageName'.
	Description	The specified programming language is not supported for the GENERATE IMPLEMENTATION or INTERFACE operation.
	Action	Specify a valid language name.
13	FATAL: Exceeded nesting limit for INCLUDE directive.
	Description	The limit of open files for LOAD or COMPILE operations was exceeded.
	Action	Reduce the number of #include directives.
14	FATAL: `MethodServerName' must be an implementation.
	Description	For the GENERATE IMPLEMENTATION operation, the object specified by MethodServerName must be an implementation.
	Action	Verify the object name. Specify a valid implementation.
15	FATAL: Bad or unsupported option.
	Description	UNIX systems only. An invalid option was specified on the WLE command line.
	Action	Verify that all options specified are valid for the command.
16	FATAL: Too many arguments.
	Description	UNIX systems only. Too many arguments were specified on the WLE command line.
	Action	Verify the syntax of the specified command.
17	FATAL: Required arguments are not specified.
	Description	UNIX systems only. Not all required arguments were specified on the command line.
	Action	Verify the syntax of the specified command, and specify the required arguments.
18	FATAL: One or more specified options conflict.
	Description	UNIX systems only. Conflicting options were specified on the command line.
	Action	Verify that all options specified are supported for the specified form of the command.
19	FATAL: Encountered error token generated by SHOW command. Please verify definition file.
	Description	The &BAD& token generated by the SHOW command was encountered during a LOAD operation.
	Action	Verify the definition file, and replace the &BAD& markers with the correct syntax.
20	FATAL: Unexpected EOF inside of comment.
	Description	During the parse of the definition file for a LOAD operation, an unclosed comment resulted in a premature EOF.
	Action	Verify the definition file; close the comment.
21	ERROR: Could not set symbol `Name'.
	Description	On a GET ARGUMENT operation, a value could not be set for the specified symbol.
	Action	Verify that the symbol name is valid; verify that the value is not too long.
22	ERROR: Unknown command.
	Description	For the UNIX interface, the specified command is unknown.
	Action	Verify the command.
23	INFO: Empty definition file `Filename'; no object(s) found.
	Description	For the LOAD or COMPILE operation, the definition file did not contain any object definitions.
	Action	Define some objects.
24	INFO: No proxies found.
	Description	No proxies were found matching the specified criteria.
	Action	Modify or eliminate the Remote Host, Remote User, or Local User fields.
25	FATAL: Input line is too long.
	Description	For LOAD or COMPILE commands, a line in the input definition file is too long.
	Action	Divide the line across multiple lines; use the concatenation character.
26	ERROR: Repository error.
	Description	The operation failed due to a repository error.
	Action	Refer to associated messages for additional information.
27	ERROR: An internal software error occurred.
	Description	An internal software error occurred. The operation was not completed.
	Action	Contact BEA Technical Support.
28	FATAL: Exceeded scope limit.
	Description	The limit of nested scopes for COMPILE operations was exceeded.
	Action	Reduce the number of nested module and interface definitions.
29	ERROR: `Name' already defined in this scope.
	Description	This definition conflicts with a previous definition of the same name in this scope.
	Action	Determine whether the two identifiers should have the same name.
30	ERROR: `Name' not defined.
	Description	This identifier is not defined within the scope of this usage.
	Action	Define the identifier.
31	ERROR: `Name' not defined in scope.
	Description	This identifier is not defined within the specified scope.
	Action	Define the identifier in the specified scope.
32	ERROR: `Name' has incorrect type for qualifier.
	Description	This identifier cannot be used as a qualifier in a scoped name because it is not a type that can contain other objects.
	Action	Correct the scoped name.
33	ERROR: `Name' is not a valid type specification.
	Description	This specified identifier cannot be used as a type specification.
	Action	Correct the type specification.
34	ERROR: Not a simple type, use a type name instead.
	Description	A struct, union, or enum has been used where a simple type is required.
	Action	Use a type name instead of a struct, union, or enum.
35	ERROR: Size must be an integer constant.
	Description	The size of a bounded string, bounded sequence, or array must be an integer constant.
	Action	Enter an integer for the size.
36	ERROR: Size must be a positive value.
	Description	The size of a bounded string, bounded sequence, or array must be a positive integer constant.
	Action	Enter an positive integer for the size.
37	ERROR: Case label has wrong type.
	Description	The type of the constant expression in the case label does not match the type specified in the switch statement.
	Action	Enter an expression of the correct type.
38	ERROR: Case label has invalid value.
	Description	The value of the constant expression in the case label is invalid for the data type specified in the switch statement. The value may be too large or too small for the data type, or negative for an unsigned data type.
	Action	Enter an expression of the correct value.
39	ERROR: Expression has wrong type.
	Description	The value of the expression does not match the defined type.
	Action	Enter an expression of the correct type.
40	ERROR: Expression value out of range.
	Description	The value of the expression is not within the range of the defined data type.
	Action	Enter an expression within the range of the data type.
41	ERROR: String is too long.
	Description	The length of the string expression exceeds the size of the defined bounded string.
	Action	Increase the size of the string.
42	ERROR: Cyclic type reference must be in a Sequence.
	Description	A cyclic reference to a type must be contained within a sequence.
	Action	Move the cyclic type reference into a sequence.
43	ERROR: Constant has no value.
	Description	A reference has been made to a constant definition that has no defined value.
	Action	Define a value for the constant.
44	ERROR: `Name' is not a valid switch type.
	Description	The specified type is not a valid type for a switch statement. Valid types are long, short, unsigned long, unsigned short, char, boolean, or enum.
	Action	Enter one of the valid types.
45	ERROR: Only one default label allowed.
	Description	Only one default label is allowed in a switch statement.
	Action	Remove the duplicate default label.
46	ERROR: Duplicate label value.
	Description	More than one case label contains the same value. Label values must be unique.
	Action	Remove the duplicate case label value.
47	ERROR: Structure is empty.
	Description	The structure definition contains no members. A structure must contain at least one member.
	Action	Add at least one member to the structure.
48	ERROR: No full interface definition found for `Name'.
	Description	The full interface definition for the specified forward reference is not found.
	Action	Remove the forward reference or add an interface definition.
49	ERROR: `Name' must be an exception.
	Description	The identifier specified in the raises statement is not an exception.
	Action	Correct the name to specify an exception.
50	ERROR: `Name' is a malformed context property.
	Description	This context property is not correctly specified. A context property is a sequence of alphanumeric, '.', '_', and '*' characters. The first character must be an alphabetic character. An asterisk may be used only as the last character of the string.
	Action	Correct the context property.
51	ERROR: `Name' is not a valid constant type.
	Description	The specified type is not a valid type for a constant statement. Valid types are long, short, unsigned long, unsigned short, char, boolean, float, or double, plus any previously defined name of these types.
	Action	Enter a valid type.
52	ERROR: `DataType' and `Name' types can not be mixed in expression.
	Description	The specified expression contains mixed types (for example, integers mixed with floats). A mixed-type expression is illegal.
	Action	Eliminate the use of mixed types in the expression.
53	ERROR: Division by zero.
	Description	An expression attempts to divide by zero.
	Action	Correct the expression to remove the division by zero.
54	ERROR: Shift value out of range.
	Description	The right operand in the shift operator is invalid. It must be in the range 0 <= right operand < 32.
	Action	Correct the right operand.
55	ERROR: Operator only applies to integers.
	Description	The specified operator applies only to operands of type integer.
	Action	Specify an integer operand.
56	ERROR: Operator not applicable to values of type `DataType'.
	Description	The specified operator does not apply to operands of the specified type.
	Action	Specify an operand of the correct type.
57	ERROR: Unary operator `Name' not allowed with operand of type `DataType'.
	Description	The specified unary operand does not support an operand of the specified type.
	Action	Correct the unary operand.
58	ERROR: Interface `Name' not fully defined yet.
	Description	The specified interface has not been fully defined.
	Action	Move the definition of the interface so that the definition is completed before this reference.
59	ERROR: `Name' is not an interface.
	Description	An interface can only inherit from interfaces. The specified item is not an interface.
	Action	Correct the inheritance statement to specify only interfaces.
60	ERROR: Inheritance conflict: `Name' inherited from both `Base1' and `Base2'.
	Description	An inheritance conflict has occurred. The specified element is inherited from two different base interfaces. References to base interface elements must be unambiguous.
	Action	Resolve the ambiguity by qualifying the element name with its interface name.
61	ERROR: Pointer types are not allowed.
	Description	Pointer types are not allowed in definitions.
	Action	Utilize a construct such as sequence.
62	ERROR: Union body is empty.
	Description	The union body contains no statements. It must contain at least one case.
	Action	Add a case to the body of the union statement.
63	ERROR: Missing case label.
	Description	A case label is required for each element in the union statement.
	Action	Add a case label to the union statement.
64	ERROR: Enum is empty.
	Description	The enum statement contains no identifiers. An enum statement must contain at least one identifier.
	Action	Add an identifier to the enum statement.
65	FATAL: Unexpected end of file.
	Description	During the parse of the definition file, the end of the file was reached before parsing was completed. This problem indicates an error in the definition file.
	Action	Correct the error and retry.
66	ERROR: Character literal is empty.
	Description	The character literal does not contain a character.
	Action	Add a character to the literal.
67	ERROR: Bad identifier name `Name'.
	Description	The specified identifier name is invalid (for example, illegal characters, starts with _, and so on). An identifier name consists of alphanumeric and underscore (_) characters. The first character must be an alphabetic character.
	Action	Verify the identifier name.
68	FATAL: Unexpected end of file inside of literal.
	Description	During the parse of the definition file, an unclosed literal resulted in a premature end of file.
	Action	Verify the definition file; close the literal.
69	FATAL: Unexpected end of line inside of literal.
	Description	During the parse of the definition file, an unclosed literal was found.
	Action	Verify the definition file; close the literal.
70	WARN: Identifier `Name' already referenced in this scope.
	Description	The specified identifier has already been referenced in this scope of the definition.
	Action	Verify the definition.
71	WARN: Identifier should be spelled `Name'.
	Description	An identifier for a definition must be spelled consistently (with respect to case) throughout a specification.
	Action	Correct the identifier spelling.
72	WARN: Module declarations are not allowed inside interfaces.
	Description	Module declarations are not allowed inside interface definitions. Module declarations are allowed only at the top level or inside other module definitions.
	Action	Move the module declaration.
73	WARN: Module is empty.
	Description	The module definition is empty. Modules usually contain other definitions, such as interfaces, typedefs, and so on.
	Action	Add definitions to the module.
74	WARN: Interface declarations are not allowed inside interfaces.
	Description	Interface declarations are not allowed inside other interface definitions. Interface declarations are allowed only at the top level or inside module definitions.
	Action	Move the interface declaration.
75	WARN: Operation declarations are only allowed inside interfaces.
	Description	Operation declarations are allowed only inside interfaces.
	Action	Move the operation declaration inside an interface definition.
76	WARN: Oneway operations can not have a return value.
	Description	Oneway operations do not return results, data, or exceptions.
	Action	Modify the operation declaration to remove the return value.
77	WARN: Oneway operations can not have a raises list.
	Description	Oneway operations do not return results, data, or exceptions.
	Action	Modify the operation declaration to remove the raises list.
78	WARN: Oneway operations can only have 'in' parameters.
	Description	Oneway operations do not return results, data, or exceptions.
	Action	Modify the operation declaration to remove the 'inout' or 'out' parameter mode.
79	WARN: Attribute declarations are only allowed inside interfaces.
	Description	Attribute declarations are only allowed inside interfaces.
	Action	Move the attribute declaration inside an interface definition.
80	WARN: `val' can not inherit from itself.
	Description	`val' can not inherit from itself.
	Action	Modify the inheritance of `val' so that is does not refer to itself.
81	WARN: Duplicate base interface `val'.
	Description	`val' was already found in the inheritance for this interface.
	Action	Modify the inheritance of the interface to remove the duplication.
82	WARN: Missing semicolon, inserted here.
	Description	A semicolon was missing from the idl definition, most likely after the closing bracket of a module or an interface.
	Action	Modify the idl to add the missing semicolon.
83	WARN: Missing inheritance list.
	Description	The compiler found a (':') that was not followed by a scoped name, indicating the inheritance of the object.
	Action	Either remove the colon (':') (which removes any inheritance), or modify the idl to add the base object after the (':').
84	WARN: Missing parameter mode, assuming 'in'.
	Description	The operation was missing the parameter mode for at least one parameter. By default, the parameter is assigned a mode of 'in'.
	Action	Modify the operation to specify the parameter mode.
85	WARN: Missing exceptions.
	Description	The raises clause is missing a list of exceptions.
	Action	Modify the raises clause to specify the exceptions that will be raised by this operation.
86	WARN: Missing context names.
	Description	The context clause is missing a list of contexts.
	Action	Modify the context clause to specify the contexts.
87	ERROR: Keyword should be spelled `Name'.
	Description	The OMG IDL file contains keywords that have the wrong case.
	Action	Find the keyword with the wrong case and correct it.
88	WARN: The float literal is invalid.
	Description	The specified literal is not a valid float literal.
	Action	Verify the definition file and correct the literal.
89	WARN: Unterminated character literal.
	Description	The specified character literal is not terminated by a closing quote.
	Action	Verify the definition file and close the character literal.
90	WARN: Ignored illegal character or escape sequence `val'.
	Description	A character was found which is not allowed by the OMG idl specification.
	Action	Modify the idl to comply with the OMG idl specification.
91	WARN: No argument found.
	Description	The specified keyword requires an argument, but none has been included.
	Action	Add the appropriate argument for this keyword or remove the keyword.
93	INFO: Duplicate definition of `Name' ignored.
	Description	The named definition occurs more than once.
	Action	Remove the duplicate definition.
94	WARN: Implementation declarations are not allowed inside implementations.
	Description	Implementation declarations are not allowed inside other implementation definitions. Implementation declarations are allowed only at the top level or inside module definitions.
	Action	Move the implementation declaration.
95	ERROR: `Name' is not an implementation.
	Description	An implementation can inherit only from implementations. The specified item is not an implementation.
	Action	Correct the inheritance statement to specify only implementations.
96	WARN: Duplicate base implementation `Name'.
	Description	A base implementation is specified more than once in the inheritance list.
	Action	Remove the duplicate base implementation from the inheritance list.
97	ERROR: `Name' must be an interface.
	Description	The identifier specified in the interface list is not an interface.
	Action	Specify an interface.
98	ERROR: Bad argument type for argument `ArgumentName' in operation `Name'.
	Description	For operations that generate client stubs, the argument type for the specified operation is not a supported WLE argument data type.
	Action	Specify a valid argument data type.
99	ERROR: Bad argument type for result in operation `Name'.
	Description	For GENERATE INTERFACE or IMPLEMENTATION, the return type for the specified operation or method is not a supported WLE return data type.
	Action	Specify a valid return data type.