CMDTUX Messages 6600-6699

6620

WARN: Bad hex value for LADBG, ignored

Description

The environmental variable LADBG contains incorrectly formated hex value, it will be ignored.

Action

Shutdown the LAUTHSVR server, and correct the error, and then reboot it.

See Also

LAUTHSVR(5)

6621

ERROR: Unsupported LADBG format, ignored

Description

The environmental variable LADBG only support hex or decimal number.

Action

Shutdown the LAUTHSVR server, and correct the error, and then reboot it.

See Also

LAUTHSVR(5), tpusrdel(1), tpusradd(1)

6622

INFO: Set debug registry val

Description

The debugging registry is set to the specified value val.

Action

None.

See Also

LAUTHSVR(5), tpusrdel(1), tpusradd(1)

6623

ERROR: Memory allocation failure

Description

The system does not have enough memory to process environmental variables.

Action

Check system memroy usage, if problem persist contact your BEA Customer Support.

See Also

LAUTHSVR(5)

6624

ERROR: Memory allocation failure

Description

The system does not have enough memory to process environmental variables.

Action

Check system memroy usage, if problem persist contact your BEA Customer Support.

See Also

LAUTHSVR(5), tpusrdel(1), tpusradd(1)

6625

ERROR: Unable to advertise AUTHSVC.

Description

Unable to advertise service AUTHSVC.

Action

Contact your BEA Customer Support.

See Also

LAUTHSVR(5)

6626

ERROR: Authentication level must be USER_AUTH, ACL or MANDATORY_ACL.

Description

The Tuxedo SECURITY must be configured with USER_AUTH, ACL, or MANDATORY_ACL.

Action

Correct the error in TUXCONFIG and then reboot the Tuxedo.

See Also

LAUTHSVR(5), tmboot(1), tmshutdown(1)

6627

ERROR: Configuration file fname specified previously

Description

The LAUTHSVR configured in the ubbconfig specified with more than one "-f" option.

Action

Correct the ubbconfig error, and reload the configuration.

See Also

LAUTHSVR(5), tmloadcf(1)

6628

ERROR: None hexdecimal value specified in initial debugging level!

Description

The initial debugging value is not specified with correct hex number format.

Action

Correct the error.

See Also

LAUTHSVR(5)

6629

ERROR: None numerical value specified in initial debugging level!

Description

The initial debugging value is not numerical.

Action

Correct the error.

See Also

LAUTHSVR(5)

6630

ERROR: Unknown command line switch sw

Description

The LAUTHSVR is configured with unsupported command line switch sw.

Action

Correct the error in the ubbconfig.

See Also

LAUTHSVR(5), ubbconfig(5)

6631

ERROR: Memory allocation failure

Description

The system does not have enough memory to process system information.

Action

Check system memroy usage, if problem persist contact your BEA Customer Support.

See Also

LAUTHSVR(5)

6632

ERROR: Memory allocation failure

Description

The system does not have enough memory to process system information.

Action

Check system memroy usage, if problem persist contact your BEA Customer Support.

See Also

LAUTHSVR(5)

6633

ERROR: Process pname configuration file failed

Description

The LAUTHSVR failed to process its configuration file.

Action

Correct the problem in previous ULOG error message, and reboot the LAUTHSVR.

See Also

LAUTHSVR(5), tmboot(1)

6634

WARN: Error occurred, dynamic configuration disabled

Description

Unable to get necessary resources to do dynamic configuration. This feature will be disabled.

Action

To enable this feature, look at the previous ULOG error message, correct the problem, then reboot LAUTHSVR.

See Also

LAUTHSVR(5), tmboot(1)

6635

ERROR: Unable to create connection to LDAP server

Description

Unable to get necessary resources to handle background LDAP connection handling.

Action

Check the previous ULOG error message, and correct it.

See Also

LAUTHSVR(5)

6636

WARN: Failed to stop dynamic configuration

Description

Unable to stop the background dynamic configuration handling.

Action

Contact your BEA Customer Support.

See Also

LAUTHSVR(5)

6637

WARN: Configuration file <fname> is removed

Description

The LAUTHSVR configuration file is removed, the dynamic configuration update is stopped.

Action

Restore the configuration file, or ignore this warning message.

See Also

LAUTHSVR(5)

6638

INFO: Configuration file <fname> restored

Description

The LAUTHSVR configuration file is restored, the dynamic configuration update is enabled.

Action

None.

See Also

LAUTHSVR(5)

6639

INFO: Serious error encountered in configuration file <fname>, chage ignored

Description

The background dynamic configuration manager encountered error while parsing the configuration file.

Action

Check the previous ULOG error message and correct the error.

See Also

LAUTHSVR(5)

6640

WARN: Dynamic cnfiguration already installed

Description

The LAUTHSVR internal error, that it is trying to install second copy of dynamic configuration manager.

Action

Contact your BEA Customer Support.

See Also

LAUTHSVR(5)

6641

ERROR: Failed to initialize synchronization structure

Description

Unable to create synchronization structure to control access to the shared resource.

Action

Check whehter the OS support the threads. If it does support the thread check the system configuration for maximum number of thread supported per process. If the system limit reached, change your system configuration. If problem persist, contact your BEA Customer Support. Correct the error.

See Also

LAUTHSVR(5)

6642

ERROR: Failed to install dynamic configuration

Description

Unable to get enough resources to install dynamic configuration manager.

Action

Check the previous ULOG error message, and correct the error.

See Also

LAUTHSVR(5)

6643

ERROR: Memory allocation failure

Description

The system does not have enough memory to process LAUTHSVR configuration.

Action

Check system memroy usage, if problem persist contact your BEA Customer Support.

See Also

LAUTHSVR(5)

6644

ERROR: None integer specified in initial debugging level!

Description

The specified debugging level information is not in correct integer format.

Action

Correct the problem and reboot the LAUTHSVR server.

See Also

LAUTHSVR(5)

6645

ERROR: Memory allocation failure

Description

The system does not have enough memory to process user authentication request.

Action

Check system memroy usage, if problem persist contact your BEA Customer Support.

See Also

LAUTHSVR(5)