CMDTUX Messages 6300-6399

6301

ERROR: A TLOGDEVICE cannot be configured if the NO_XA option is set

Description

The identifier for TLOGDEVICE as specified in the MACHINES section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file.

See Also

ubbconfig(5) and tmloadcf (1)

6303

ERROR: TLOGOFFSET cannot be configured if the NO_XA option is set

Description

The identifier for TLOGOFFSET as specified in the MACHINES section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6305

ERROR: A TLOGNAME cannot be configured if the NO_XA option is set

Description

The identifier for TLOGNAME as specified in the MACHINES section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6307

ERROR: TLOGSIZE cannot be configured if the NO_XA option is set

Description

The identifier for TLOGSIZE as specified in the MACHINES section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6309

ERROR: TMSNAME cannot be configured if the NO_XA option is set

Description

The identifier for TMSNAME as specified in the GROUPS section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6311

ERROR: CLOSEINFO cannot be configured if the NO_XA option is set

Description

The identifier for CLOSEINFO as specified in the GROUPS section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6313

ERROR: OPENINFO cannot be configured if the NO_XA option is set

Description

The identifier for OPENINFO as specified in the GROUPS section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6315

ERROR: SICACHEENTRIESMAX must be >= 0 and < 32768.

Description

The SICACHEENTRIESMAX parameter in the SERVERS section must be greater than or equal to 0 and less than 322768.

Action

Correct the value of SICACHEENTRIESMAX and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6320

ERROR: Can't tpadmcall buffer buf

Description

ud was unable to send a buffer to tpadmcall to process. Additional information is printed indicating the cause of the failure.

Action

Check the reason for the failure. No action required.

See Also

ud(1), TM_MIB(5)

6321

ERROR: AUTOTRAN specified in an application with the NO_XA option.

Description

The identifier for AUTOTRAN as specified in the SERVICES section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6322

ERROR: AUTOTRAN specified in an application with the NO_XA option.

Description

The identifier for AUTOTRAN as specified in the SERVICES section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6323

ERROR: Unlicensed System Binary

Description

A valid license file has not been installed in $TUXDIR/udataobj/lic.txt. This license file must have a section for Engine with the specific version number..

Action

Buy a license and install the provided file in udataobj/lic.txt.

6325

ERROR: SICACHEENTRIESMAX must be >= 0 and < 32768.

Description

The SICACHEENTRIESMAX parameter in the SERVERS section must be greater than or equal to 0 and less than 322768.

Action

Correct the value of SICACHEENTRIESMAX and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6327

ERROR: SICACHEENTRIESMAX must be >= 0 and < 32768.

Description

The SICACHEENTRIESMAX parameter in the SERVERS section must be greater than or equal to 0 and less than 322768.

Action

Correct the value of SICACHEENTRIESMAX and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6329

ERROR: SICACHEENTRIESMAX must be >= 0 and < 32768.

Description

The SICACHEENTRIESMAX parameter in the SERVERS section must be greater than or equal to 0 and less than 322768.

Action

Correct the value of SICACHEENTRIESMAX and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6330

ERROR: AUTOTRAN specified in an application with the NO_XA option.

Description

The identifier for AUTOTRAN as specified in the SERVICES section of the UBBCONFIG can not be set if the OPTIONS in the RESOURCE section has the NO_XA option set.

Action

Correct the incompatible value of the UBBCONFIG file and re-run tmloadcf(1).

See Also

ubbconfig(5) and tmloadcf (1)

6331

ERROR: Memory allocation failure.

Description

The system ran out of memory in the BRIDGE or BSBRIDGE

Action

Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.

6332

ERROR: Error sending keepalive packet

Description

While sending the keepalive packet for BRIDGE communication, an error occurred.

Action

Check the network on the machine with the affected BRIDGE or BSBRIDGE.