Corporate Info  |  News  |  Solutions  |  Products  |  Partners  |  Services  |  Events  |  Download  |  How To Buy
	http://www.oracle.com/technology/documentation/index.html   |   Site Map   |   Search   |   PDF Files   |   Contact   |   Glossary
Tuxedo Doc Home   |   Messages   |   Catalog List   |   Previous   |   Next

LIBTUX Messages 600-699

600	ERROR: [Invalid buffer type information type]
	Description	The buffer type information provided in the configuration file was incorrect.
	Action	Check the configuration file, verify that the buffer type provided is correct, and repeat the operation.
	See Also	ubbconfig(5), tmloadcf(1)
601	ERROR: [Invalid buffer subtype information subtype_val]
	Description	The buffer subtype information provided in the configuration file was incorrect.
	Action	Check the configuration file, verify that the buffer type provided is correct, and repeat the operation.
	See Also	ubbconfig(5), tmloadcf(1)
602	ERROR: TUXCONFIG environment variable not set
	Description	The TUXCONFIG environment variable is not set.
	Action	Set and export the TUXCONFIG environment variable, which should be the same as defined in the UBBCONFIG file.
	See Also	ubbconfig(5)
603	ERROR: TUXCONFIG file filename does not exist
	Description	The TUXCONFIG file, filename, does not exist.
	Action	Check the TUXCONFIG environment variable to see if it matches with the definition of the TUXCONFIG in the UBBCONFIG file. Then, check to see if the TUXCONFIG file has been generated. If not, use tmloadcf(1) to create the TUXCONFIG file.
	See Also	tmloadcf(1), ubbconfig(5)
604	ERROR: Cannot get file status on TUXCONFIG file filename, errno = errno_val
	Description	Cannot get the file status on the TUXCONFIG file, filename.
	Action	Check the UNIX errno for reasons and take appropriate actions accordingly.
	See Also	stats(2) in UNIX system reference manuals
605	ERROR: TUXOFFSET environment variable must be >= 0
	Description	The TUXOFFSET environment variable is less than 0.
	Action	Specify a value for the TUXOFFSET environment variable that is greater than or equal to 0. This TUXOFFSET value must be the same as defined in the UBBCONFIG file.
	See Also	ubbconfig(5)
607	ERROR: Cannot open section section_name of the TUXCONFIG: file
	Description	The section_name of the TUXCONFIG file cannot be opened. The TUXCONFIG file might be corrupted.
	Action	You can shut down the application and re-load the TUXCONFIG file using tmloadcf. If the error still occurs, contact your BEA TUXEDO system Technical Support.
	See Also	tmloadcf(1)
608	ERROR: Memory allocation failure
	Description	Memory allocation failed for adding new sections in the TUXCONFIG file.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
610	ERROR: Cannot close the TUXCONFIG file
	Description	The TUXCONFIG file in the VTOC table cannot be closed.
	Action	Check the permission and the existence of the TUXCONFIG file, or contact your BEA TUXEDO system Technical Support.
612	ERROR: Read an entry from the VTOC table failed
	Description	Reading an entry from the disk table failed. Possible causes: the logical table file descriptor was corrupted the read page offset was set incorrectly by the system the table itself got corrupted which caused read() to fail.
	Action	Check your disk tables such as VTOC for possible corruptions and/or damages. If this error still occurs, contact your BEA TUXEDO system Technical Support.
	See Also	read(2) in UNIX system reference manuals
614	ERROR: Cannot write to the section_name of the TUXCONFIG file which is not opened
	Description	Cannot write to the section_name of the TUXCONFIG file which was never opened.
	Action	Check your TUXCONFIG file, or contact your BEA TUXEDO system Technical Support.
	See Also	tmunloadcf(1), write(2) in UNIX system reference manuals
615	ERROR: Write to the section_name of the TUXCONFIG file failed
	Description	Write to the section_name of the TUXCONFIG file in VTOC table failed. Possible causes: the logical table file descriptor was corrupted the write page offset was set incorrectly by the system the table itself got corrupted which caused write() to fail.
	Action	Check your disk tables such as VTOC for possible corruptions and/or damages. If this error still occurs, contact your BEA TUXEDO system Technical Support.
	See Also	write(2) in UNIX system reference manuals
616	ERROR: The routing section of the TUXCONFIG file cannot be located
	Description	The routing section of the TUXCONFIG file cannot be located. Possible causes: the TUXCONFIG file might be corrupted the TUXCONFIG environment variable might not be set the TUXOFFSET environment variable was less than zero.
	Action	Contact your BEA TUXEDO system Technical Support. See Messages 602, 605, and 607 in this chapter for explanation.
624	ERROR: Data tables for routing section full
	Description	Data routing tables in the Bulletin Board are full when parsing the routing range and creating the data routing entries.
	Action	This is a system error, contact your BEA TUXEDO system Technical Support.
625	ERROR: More than one wild card in entry range
	Description	More than one wild-card (*) range for the short routing data was specified in the data routing entry.
	Action	Check your UBBCONFIG file for multiple definitions of wild-card ranges for the short routing data. Only one wild-card range is allowed per routing entry and it should be the last (ranges following it will be ignored).
	See Also	ubbconfig(5)
626	ERROR: Range values out of order upper_range < lower_range
	Description	The range values for the short routing data are out of order, that is, the upper range value is less than the lower range value.
	Action	Check routing range values for the short routing data in your UBBCONFIG file. The lower range value must be less than or equal to the upper range value.
	See Also	ubbconfig(5)
627	ERROR: More than one wild card in entry range
	Description	More than one wild-card (*) range for the integer routing data was specified in the data routing entry.
	Action	Check your UBBCONFIG file for multiple definitions of wild-card ranges for the integer routing data. Only one wild-card range is allowed per routing entry and it should be the last (ranges following it will be ignored).
	See Also	ubbconfig(5)
628	ERROR: Range values out of order upper_range < lower_range
	Description	The range values for the integer routing data are out of order, that is, the upper range value is less than the lower range value.
	Action	Check routing range values for the integer routing data in your UBBCONFIG file. The lower range value must be less than or equal to the upper range value.
	See Also	ubbconfig(5)
629	ERROR: More than one wild card in entry range
	Description	More than one wild-card (*) range for the long routing data was specified in the data routing entry.
	Action	Check your UBBCONFIG file for multiple definitions of wild-card ranges for the long routing data. Only one wild-card range is allowed per routing entry and it should be the last (ranges following it will be ignored).
	See Also	ubbconfig(5)
630	ERROR: Range values out of order upper_range < lower_range
	Description	The range values for the long routing data are out of order, that is, the upper range value is less than the lower range value.
	Action	Check routing range values for the long routing data in your UBBCONFIG file. The lower range value must be less than or equal to the upper range value.
	See Also	ubbconfig(5)
631	ERROR: More than one wild card in entry range
	Description	More than one wild-card (*) range for the float routing data was specified in the data routing entry.
	Action	Check your UBBCONFIG file for multiple definitions of wild-card ranges for the float routing data. Only one wild-card range is allowed per routing entry and it should be the last (ranges following it will be ignored).
	See Also	ubbconfig(5)
632	ERROR: Range values out of order upper_range < lower_range
	Description	The range values for the float routing data are out of order, that is, the upper range value is less than the lower range value.
	Action	Check routing range values for the float routing data in your UBBCONFIG file. The lower range value must be less than or equal to the upper range value.
	See Also	ubbconfig(5)
633	ERROR: More than one wild card in entry range
	Description	More than one wild-card (*) range for the double routing data was specified in the data routing entry.
	Action	Check your UBBCONFIG file for multiple definitions of wild-card ranges for the double routing data. Only one wild-card range is allowed per routing entry and it should be the last (ranges following it will be ignored).
	See Also	ubbconfig(5)
634	ERROR: Range values out of order upper_range < lower_range
	Description	The range values for the double routing data are out of order, that is, the upper range value is less than the lower range value.
	Action	Check routing range values for the double routing data in your UBBCONFIG file. The lower range value must be less than or equal to the upper range value.
	See Also	ubbconfig(5)
635	ERROR: More than one wild card in entry range
	Description	More than one wild-card (*) range for the char routing data was specified in the data routing entry.
	Action	Check your UBBCONFIG file for multiple definitions of wild-card ranges for the char routing data. Only one wild-card range is allowed per routing entry and it should be the last (ranges following it will be ignored).
	See Also	ubbconfig(5)
636	ERROR: Range values out of order upper_range < lower_range
	Description	The range values for the char routing data are out of order, that is, the upper range value is less than the lower range value.
	Action	Check routing range values for the char routing data in your UBBCONFIG file. The lower range value must be less than or equal to the upper range value.
	See Also	ubbconfig(5)
637	ERROR: More than one wild card in entry range
	Description	More than one wild-card (*) range for the string routing data was specified in the data routing entry.
	Action	Check your UBBCONFIG file for multiple definitions of wild-card ranges for the string routing data. Only one wild-card range is allowed per routing entry and it should be the last (ranges following it will be ignored).
	See Also	ubbconfig(5)
638	ERROR: Range values out of order for the string routing data
	Description	The range values for the string routing data are out of order, that is, the upper range value is less than the lower range value.
	Action	Check routing range values for the string routing data in your UBBCONFIG file. The lower range value must be less than or equal to the upper range value.
	See Also	ubbconfig(5)
639	ERROR: More than one wild card in entry range
	Description	More than one wild-card (*) range for the carray routing data was specified in the data routing entry.
	Action	Check your UBBCONFIG file for multiple definitions of wild-card ranges for the carray routing data. Only one wild-card range is allowed per routing entry and it should be the last (ranges following it will be ignored).
	See Also	ubbconfig(5)
640	ERROR: Range values out of order for the carray routing data
	Description	The range values for the carray routing data are out of order, that is, the upper range value is less than the lower range value.
	Action	Check routing range values for the carray routing data in your UBBCONFIG file. The lower range value must be less than or equal to the upper range value.
	See Also	ubbconfig(5)
641	ERROR: Unknown field type was specified for data routing entry
	Description	An unknown field type was specified in the data routing entry.
	Action	Check the field types specified in the ROUTING section of the UBBCONFIG file.
	See Also	ubbconfig(5)
642	ERROR: Expected colon to separate server group range
	Description	Within a range and a server group pair, the range is separated from the server group by a colon (:) in the ROUTING section of the UBBCONFIG file.
	Action	Check the range and server group specified in the ROUTING section of the UBBCONFIG file. A colon (:) is expected to separate the range and the server group.
	See Also	ubbconfig(5)
643	ERROR: Expected comma after group name grpname,string
	Description	Within a range and a server group pair, a comma (,) is expected after server group name in the ROUTING section of the UBBCONFIG file.
	Action	Check the range and the server group specified in the ROUTING section of the UBBCONFIG file. A comma (,) is expected after the server group name.
	See Also	ubbconfig(5)
644	ERROR: Expecting keyword MAX
	Description	The keyword MAX is expected to indicate the maximum value for the data type of the associated field in the ROUTING section of the UBBCONFIG file.
	Action	Check the range and server group specified in the ROUTING section of the UBBCONFIG file. The keyword MAX should be specified to indicate the maximum value for the data type of the associated field.
	See Also	ubbconfig(5)
645	ERROR: Expecting keyword MIN
	Description	The keyword MIN is expected to indicate the minimum value for the data type of the associated field in the ROUTING section of the UBBCONFIG file.
	Action	Check the range and the server group specified in the ROUTING section of the UBBCONFIG file. The keyword MIN should be specified to indicate the minimum value for the data type of the associated field.
	See Also	ubbconfig(5)
646	ERROR: Expecting keyword MIN or MAX
	Description	The keyword MAX or MIN is expected to indicate the maximum or minimum value for the data type of the associated field in the ROUTING section of the UBBCONFIG file.
	Action	Check the range and server group specified in the ROUTING section of the UBBCONFIG file. The keyword MAX or MIN should be specified to indicate the maximum or the minimum value for the data type of the associated field.
	See Also	ubbconfig(5)
647	ERROR: Value out of range for a short value
	Description	The routing value for a short routing data is out of range.
	Action	Check routing range values for the short routing data in the ROUTING section of the UBBCONFIG file.
	See Also	ubbconfig(5)
648	ERROR: Value out of range for an int value
	Description	The routing value for an integer routing data is out of range.
	Action	Check routing range values for the integer routing data in the ROUTING section of the UBBCONFIG file.
	See Also	ubbconfig(5)
649	ERROR: Value out of range for a long value
	Description	The routing value for a long routing data is out of range.
	Action	Check routing range values for the long routing data in the ROUTING section of the UBBCONFIG file.
	See Also	ubbconfig(5)
650	ERROR: Expecting a ' ', '+', '-' or number after 'e/E' in float/double
	Description	A ' ', '+', '-' or number after 'e' or 'E' is expected for float or double routing values.
	Action	Check the routing range values of the float and double in the ROUTING section of the UBBCONFIG file.
	See Also	ubbconfig(5)
651	ERROR: Value out of range for a float value
	Description	The routing value for a float routing data is out of range.
	Action	Check routing range values for the float routing data in the ROUTING section of the UBBCONFIG file.
	See Also	ubbconfig(5)
652	ERROR: Value out of range for a double value
	Description	The routing value for a double routing data is out of range.
	Action	Check routing range values for the double routing data in the ROUTING section of the UBBCONFIG file.
	See Also	ubbconfig(5)
653	ERROR: Expected single quote to begin char routing data value
	Description	A single quote (') is expected at the beginning of char routing data.
	Action	Check routing range values for the char routing data in the ROUTING section of the UBBCONFIG file. A char routing data must be begun with a single quote (').
	See Also	ubbconfig(5)
654	ERROR: Expected single quote to end char routing data value
	Description	A single quote (') is expected at the end of char routing data.
	Action	Check routing range values for the char routing data in the ROUTING section of the UBBCONFIG file. A char routing data must be ended with a single quote (').
	See Also	ubbconfig(5)
655	ERROR: No more string pool free space available for routing strings and carrays
	Description	The routing string pool in the Bulletin Board is full when filling the data routing section with string and carray data.
	Action	This is a system error, contact your BEA TUXEDO system Technical Support.
656	ERROR: Expected single quote for string/carray routing data value
	Description	A single quote (') is expected for string and carray routing data.
	Action	Check routing range values for string and carray routing data in the ROUTING section of the UBBCONFIG file. The string and carray routing data must be within single quotes (').
	See Also	ubbconfig(5)
657	ERROR: No more string pool free space available for routing strings and carrays
	Description	There is not enough routing free string pool space in the Bulletin Board when filling the data section with string and carray data.
	Action	This is a system error, contact your BEA TUXEDO system Technical Support.
659	ERROR: Discovered a NULL character in string routing data value
	Description	A NULL character is found in the string routing data.
	Action	Check the string routing data for NULL characters in the ROUTING section of the UBBCONFIG file. A string value is terminated with a NULL character.
	See Also	ubbconfig(5)
660	ERROR: [Unable to find server group section of TUXCONFIG file]
	Description	A BEA TUXEDO system internal function was used to retrieve server group information from the TUXCONFIG file, but the function failed.
	Action	Contact your BEA TUXEDO system Technical Support for assistance.
661	ERROR: Invalid logical machine name - lmid
	Description	The logical machine name identifier provided is invalid. The most likely reason for that is a duplicate logical machine identifier.
	Action	Check the configuration file and ensure that no duplicate logical machine names are being used. If so, correct the name and try the operation again.
	See Also	ubbconfig(5), tmloadcf(1)
662	ERROR: Invalid logical machine name - lmid
	Description	The logical machine name identifier provided is invalid. The most likely reason for that is a duplicate logical machine identifier.
	Action	Check the configuration file and ensure that no duplicate logical machine names are being used. If duplicates are present, correct the name and try the operation again.
	See Also	ubbconfig(5), tmloadcf(1)
663	ERROR: Invalid logical machine name for server group
	Description	The logical machine name identifier provided for the server group is invalid.
	Action	Check the configuration file and ensure that the LMID used for the server group is correct. Then try the operation again.
	See Also	ubbconfig(5), tmloadcf(1)
664	ERROR: Duplicate server group entry
	Description	A duplicate entry for server groups was defined.
	Action	Check the configuration file and ensure that the server group names and IDs are unique. Then try the operation again.
	See Also	ubbconfig(5), tmloadcf(1)
665	ERROR: Invalid server group name - svrgrp_name
	Description	Cannot retrieve server group from the Bulletin Board because an invalid server group name was given.
	Action	This is a system error, contact your BEA TUXEDO system Technical Support.
666	ERROR: Message operation failed because the queue was removed
	Description	msgsnd to a queue failed because the queue was removed.
	Action	Check the message queues, or contact your BEA TUXEDO system Technical Support.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
667	ERROR: Message operation failed because of the bad message type
	Description	msgsnd to a queue failed because of the bad message type.
	Action	Check the message type in msgsnd(). The message is probably corrupted. Contact your BEA TUXEDO system Technical Support.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
668	ERROR: Message operation failed because the message size < 0
	Description	msgsnd to a queue failed because the message size is less than zero.
	Action	Check the message size in msgsnd(). The message is probably corrupted. Contact your BEA TUXEDO system Technical Support.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
669	ERROR: Message operation failed because of the invalid message queue identifier
	Description	msgsnd to a queue failed because of invalid message queue identifier. This can also occur if a request is made by a client who exits before the request is satisfied. The cleanup after the client exits removes the message queue.
	Action	Check the message queue identifier in msgsnd(). The message may be corrupted. Contact your BEA TUXEDO system Technical Support.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
670	ERROR: Message operation failed because the message is too big
	Description	msgsnd to a queue failed because the message is too big.
	Action	Check the size of the message in msgsnd().
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
671	ERROR: Message operation failed because the message queue is empty
	Description	msgsnd to a queue failed because the message queue is empty.
	Action	Check the message queues.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
672	ERROR: Message operation failed because the message queue or the system is full
	Description	msgsnd to a queue failed because the message queue or the system is full.
	Action	Check kernel parameters for message queues. Re-configure your system to meet your needs.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
673	ERROR: Message operation failed because the access permissions were denied
	Description	msgsnd to a queue failed because the message queue cannot be accessed.
	Action	Check the message queue permissions.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
674	ERROR: Message operation failed because of a bad address
	Description	msgsnd to a queue failed because the message pointer is pointing to an illegal address.
	Action	Check the address of the message queue pointer, or contact your BEA TUXEDO system Technical Support.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
675	ERROR: Message operation failed due to unknown causes
	Description	msgsnd to a queue failed due to unknown causes.
	Action	Contact your BEA TUXEDO system Technical Support.
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
678	ERROR: Message send/receive failure for remote procedure call
	Description	msgsnd/rcv failed for remote procedure call requests that are sent to the DBBL (or BBL in SHM mode). Possible causes: cannot find DBBL a server died messages send/receive failed.
	Action	Check DBBL, servers, and message queues, or contact your BEA TUXEDO system Technical Support. See Messages 503, 505, and 506 in this chapter for explanation
	See Also	intro(2), msgsnd(2), msgrcv(2), msgctl(2) in UNIX system reference manuals
679	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc() failed while making a private copy of the bulletin board.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
680	ERROR: Effective UID or GID does not match bulletin board
	Description	The calling process's effective user-id, UID, or group-id, GID, is incorrect. They should match the UID and GID specified in the RESOURCES or *MACHINES section of the configuration file.
	Action	Run the process with the correct effective UID and GID.
681	ERROR: Failure to create message queue
	Description	A UNIX system message queue could not be created during BEA TUXEDO system process initialization.
	Action	Verify the UNIX's kernel parameters related to message queues, and increase if necessary. In particular, check MSGMNI. The BEA TUXEDO system's multi-server single queue, MSSQ, feature allows multiple servers to share the same queue, reducing the number required.
	See Also	BEA TUXEDO Installation Guide
682	ERROR: Send/receive error for remote procedure call
	Description	A message send failed. The message send failure may have resulted from a message type switch function failure, an invalid message length, or a low level message send failure.
	Action	Check for a partitioned network, corrupted shared memory, all administrative processes are running, and sysgen parms for messages are appropriate.
683	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc() failed while creating a system message buffer.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
684	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc() failed while a server process was trying to advertise its services.
	Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
687	ERROR: Received message with an unknown release number X
	Description	A BEA TUXEDO system message was received with an unknown release number in its message header. Messages from both the current release and the previous release are understood. This does not include minor "point" maintenance releases. For example, a 4.2.1 BEA TUXEDO system process understands 4.2.1, 4.2, and 4.1 message formats. It does not understand a release 4.0 message, since that is two major releases old. There is a different problem if the unknown release number is 0 or a very large number. It has been observed that if the underlying TCP/IP network is unreliable, and drops bytes from the middle of messages, this "unknown release number" error may occur frequently. It would typically be reported by the BRIDGE or WSH process. The problem is that the BEA TUXEDO system message header describes how many bytes follow the header. If some are lost by the network, all subsequent message headers will not be in the correct position in the data stream.
	Action	Upgrade any machines in the network running an old release of the BEA TUXEDO system. Note that the MASTER and BACKUP must be upgraded first, so they are always running the most recent version. Investigate and resolve any networking problems. TCP/IP should guarantee reliable end-to-end transport of data.
689	ERROR: Received a message that is smaller than system minimum
	Description	A BEA TUXEDO system message was received by the process, and is known to be invalid because it was too small.
	Action	A likely cause is a compressed message being received by a process linked with release 4.2 or earlier BEA TUXEDO system libraries. The message compression feature was introduced in release 4.2.1, and should not be enabled until the entire application is running 4.2.1 or a later release. This includes application client and server processes, which need to be relinked.
695	ERROR: Unknown table type given
	Description	An internal BEA TUXEDO system table was requested, and could not be read because its type is unknown.
	Action	Contact your BEA TUXEDO system Technical Support.
696	ERROR: Missing search key
	Description	An internal BEA TUXEDO system table was requested, and could not be read because a search key was not provided to the low-level access routine.
	Action	Contact your BEA TUXEDO system Technical Support.
697	ERROR: Missing search key
	Description	An internal BEA TUXEDO system table was requested, and could not be read because a search key was not provided to the low-level access routine.
	Action	Contact your BEA TUXEDO system Technical Support.
698	ERROR: Invalid search key
	Description	An internal BEA TUXEDO system table was requested, and could not be read because an invalid search key was passed to the low-level access routine.
	Action	Contact your BEA TUXEDO system Technical Support.
699	ERROR: Missing search key
	Description	An internal BEA TUXEDO system table was requested, and could not be read because a search key was not provided to the low-level access routine.
	Action	Contact your BEA TUXEDO system Technical Support.