Corporate Info  |  News  |  Solutions  |  Products  |  Partners  |  Services  |  Events  |  Download  |  How To Buy
	http://www.oracle.com/technology/documentation/index.html   |   Site Map   |   Search   |   PDF Files   |   Contact   |   Glossary
Tuxedo Doc Home   |   Messages   |   Catalog List   |   Previous   |   Next

CMDTUX Messages 4300-4399

4306	ERROR: Could not send saved messages to site
	Description	While the BRIDGE or BSBRIDGE is negotiating the link level encryption parameters, messages to the remote BRIDGE are saved. An error occurred while sending these saved messages to the remote BRIDGE after the negotiation was complete.
	Action	Check the network on the machine with the affected BRIDGE or BSBRIDGE.
4307	ERROR: Cannot ASCII encode password (errno = val)
	Description	An error occurred while converting a non-ASCII tlisten password file into ASCII for authentication purposes.
	Action	Contact your BEA TUXEDO system Technical Support.
4309	WARN: Invalid protocol response from site
	Description	The tlisten on the remote site sent an invalid link level encryption negotiation opcode.
	Action	The tlisten on the remote site may be attempting to circumvent link level encryption. Monitor your network for malicious use. Contact your BEA TUXEDO system Technical Support.
4310	ERROR: Could not get first Diffie-Hellman packet
	Description	The process attempting to contact the tlisten could not generate the first encryption packet.
	Action	Contact your BEA TUXEDO system Technical Support.
4311	ERROR: NADDR parameter is not a correct internet address.
	Description	The NADDR parameter in the NETWORK section of the UBBCONFIG file was not in the correct format.
	Action	Any address in the NADDR field that starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change the NADDR field to comply with the known formats. If you believe that your address is in the proper format, contact your BEA TUXEDO system Technical Support.
4312	ERROR: NLSADDR parameter is not a correct internet address.
	Description	The NLSADDR parameter in the NETWORK section of the UBBCONFIG file was not in the correct format.
	Action	Any address in the NLSADDR field which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Change the NLSADDR field to comply with the known formats. If you believe that your address is in the proper format, contact your BEA TUXEDO system Technical Support.
4313	ERROR: Remote node can't interpret internet address
	Description	A BEA TUXEDO system release greater than or equal to Release 6.3 attempted to send an internet address to an older release.
	Action	Releases of the BEA TUXEDO system prior to the Release 6.3 release do not understand the internet address naming schemes. When interoperating with an older release, the older method of specifying addresses must be used. Replace internet addresses with the older "0x" style of address.
4314	ERROR: An error occurred when val attempted to access the service manager
	Description	While attempting to get the NT service name, an error occurred while opening the service manager.
	Action	Contact your BEA TUXEDO system Technical Support.
4315	ERROR: An error occurred when val attempted to allocate memory
	Description	While attempting to get the NT service name the task ran out of memory.
	Action	Check the memory on the system where the command was run. If it seems that there should be enough memory for this operation, contact your BEA TUXEDO system Technical Support.
4316	ERROR: An error occurred when val attempted to set the service status
	Description	While attempting to set the NT service status an error occurred.
	Action	Contact your BEA TUXEDO system Technical Support.
4317	ERROR: An error occurred when val attempted to register the service
	Description	While attempting to register the NT service an error occurred.
	Action	Contact your BEA TUXEDO system Technical Support.
4318	ERROR: An error occurred when val attempted to set the service status
	Description	While attempting to set the NT service status an error occurred.
	Action	Contact your BEA TUXEDO system Technical Support.
4319	ERROR: An error occurred when val attempted to access the registry
	Description	While attempting to access the NT registry an error occurred.
	Action	Contact your BEA TUXEDO system Technical Support.
4320	ERROR: An error occurred when val attempted to access the registry
	Description	While attempting to access the NT registry an error occurred.
	Action	Contact your BEA TUXEDO system Technical Support.
4322	ERROR: An error occurred when val attempted to start the service
	Description	While attempting to start the specified NT service an error occurred.
	Action	Contact your BEA TUXEDO system Technical Support.
4323	INFO: Listener Process Started
	Description	The tlisten process has started properly
	Action	No action necessary.
4324	ERROR: can't create buffer - tpalloc() failed - val
	Description	A memory allocation failure occurred in tmconfig
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4325	ERROR: tpcall() failed, val
	Description	While tmconfig was processing a request, tpcall failed.
	Action	Check the error code that tpcall returned. Check the userlog to see if any more information is available. Contact your BEA TUXEDO system Technical Support.
4328	ERROR: Memory allocation failure
	Description	While tlisten was allocating memory for the network address it ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4329	ERROR: Memory allocation failure
	Description	While tlisten was allocating memory for the network address it ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4330	ERROR: Illegal character in the address val
	Description	An illegal tlisten network address was specified.
	Action	Specify the tlisten network address with the -l option.
4331	ERROR: can't execute val
	Description	The AS400 could not execute the given command.
	Action	Check the command syntax to be sure it is proper. If it is proper and the executable referenced in the command line is currently executable, contact your BEA TUXEDO system Technical Support.
4332	ERROR: can't execute val
	Description	The AS400 could not execute the given command.
	Action	Check the command syntax to be sure it is proper. If it is proper and the executable referenced in the command line is currently executable, contact your BEA TUXEDO system Technical Support.
4333	ERROR: Memory allocation failure
	Description	Memory allocation failed while building a server.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4334	ERROR: Memory allocation failure
	Description	The AS400 ran out of memory in the tmloadcf process.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4335	ERROR: Memory allocation failure
	Description	The AS400 ran out of memory in the tmloadcf process.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4336	ERROR: Could not get application parameters
	Description	tmconfig could not find the TUXCONFIG file or could not read the TUXCONFIG file.
	Action	Ensure that the TUXCONFIG environment variable points to the appropriate configuration file. If the configuration file does not exist, it can be created from the UBBCONFIG file using tmloadcf. If it does exist, the file may be corrupted, or may have been a file generated by an older release of BEA TUXEDO system. Shut down the system, remove the file, and recreate it with tmloadcf. If the trouble persists, contact your BEA TUXEDO system Technical Support.
4337	ERROR: TUXCONFIG is not set
	Description	The TUXCONFIG environment variable must be set for tmconfig to work properly
	Action	Set the TUXCONFIG environment variable to point to the TUXCONFIG file of the application which you would like to configure.
4338	ERROR: TUXCONFIG is not set
	Description	The TUXCONFIG environment variable must be set for ud or ud32 to work properly
	Action	Set the TUXCONFIG environment variable to point to the TUXCONFIG file of the application you would like to use ud or ud32 on.
4339	ERROR: Could not get application parameters
	Description	ud or ud32 could not find the TUXCONFIG file or could not read the TUXCONFIG file.
	Action	Ensure that the TUXCONFIG environment variable points to the appropriate configuration file. If the configuration file does not exist, it can be created from the UBBCONFIG file using tmloadcf. If it does exist, the file may be corrupted, or may have been a file generated by an older release of BEA TUXEDO system. Shut down the system, remove the file, and recreate it with tmloadcf. If the trouble persists, contact your BEA TUXEDO system Technical Support.
4340	ERROR: Could not establish network address val - check device and address
	Description	The BRIDGE process could not establish its listening address for incoming network connections.
	Action	Check the NADDR and BRIDGE parameters for this machine in the NETWORK section of the configuration file.
4341	ERROR: Missing port number in the address val
	Description	The BRIDGE process could not establish a connection to the remote machine and address. There may be networking problems, or the remote machine may have crashed.
	Action	Check that the remote machine is up. Check network connectivity between the machines. Check that the BRIDGE is running on the remote machine at the given address. The BRIDGE process will automatically reestablish a connection between the machines on demand, when possible. To prevent thrashing, the link will be suspended for five minutes if an automatic reconnect attempt fails. No further automatic reconnection attempts are made during this interval. If desired, use tmadmin(1)'s reconnect command to initiate a reconnection attempt manually. Manual attempts are allowed during the five-minute suspension interval.
4342	ERROR: Unable to reconnect to machine, address
	Description	The BRIDGE process could not reconnect to machine during recovery from a networking problem.
	Action	Check that machine is up. Check network connectivity between the machines. Check that the BEA TUXEDO system is running on machine. The BRIDGE processes will automatically reestablish a connection between the machines on demand, when possible. To prevent thrashing, the link will be suspended for five minutes if an automatic reconnect attempt fails. No further automatic reconnection attempts are made during this interval. If desired, use tmadmin(1)'s reconnect command to initiate a reconnection attempt manually. Manual attempts are allowed during the five-minute suspension interval.
	See Also	Messages 1375 and 1374 and tmadmin (1)'s reconnect command
4343	ERROR: Could not establish listening endpoint address
	Description	tlisten could not establish an endpoint for listening at the given address.
	Action	Ensure that the listening endpoint is free for use by the tlisten process. If it is not, choose a different endpoint. On some operating systems, there is a long delay while the listening port is cleared. Wait 5 minutes, and try the command again.
4344	ERROR: Can't put FLDTBLDIR32 into environment
	Description	An error occurred while tmconfig32 was setting the FLDTBLDIR32 variable.
	Action	Contact your BEA TUXEDO system Technical Support.
4345	ERROR: Can't put FIELDTBLS32 into environment
	Description	An error occurred while tmconfig32 was setting the FLDTBLDIR32 variable.
	Action	Contact your BEA TUXEDO system Technical Support.
4346	ERROR: Cannot run command on /etc/passwd
	Description	command (tpaddusr, tpmodusr, or tpdelusr) was run with a filename of /etc/passwd. These commands may delete important information from /etc/passwd and cannot be used to modify it directly.
	Action	Modify the /etc/passwd file directly using a text editor or use a different user file.
4348	ERROR: An error has occurred in completing the MIB request
	Description	The sbbl was not able to finish a MIB request. The DBBL or BBL sent a message to that effect to the requestor.
	Action	Check the log for related messages.
4349	ERROR: Memory allocation failure
	Description	While checking the status of the sbbl process, the DBBL or BBL ran out of memory.
	Action	Make sure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4350	INFO: BBL started on machine - Release val
	Description	This message indicates that a new machine has been booted and records the internal release number. This information may be useful to BEA TUXEDO system support, if necessary.
	Action	No action necessary.
4351	INFO: BBL on machine - Release val
	Description	This message is printed by the DBBL during the first sanity check after midnight for each booted machine. This information may be useful to BEA TUXEDO system support, if necessary.
	Action	No action necessary.
4352	WARN: Service name must be <= len characters in length; val will be truncated
	Description	While building a server, one of the specified service names is longer than the maximum allowed. The name will be truncated.
	Action	No action is required. However, it is recommended that the name be shortened to the maximum allowed, as indicated by the message.
4353	ERROR: Port number cant be bigger than max-port in the address address
	Description	The port number portion of address is too large.
	Action	Any address which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. port_number must be less than max-port. Ensure that the port_number portion of address complies with this limit.
4354	ERROR: Can't parse the address address
	Description	While attempting to resolve address, an error occurred.
	Action	Any address which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name and port number portion of address can be located by your server.
4355	ERROR: Unable to determine license level
	Description	An error occurred while retrieving the current license attributes.
	Action	Contact your BEA TUXEDO system Technical Support.
4356	ERROR: No license for /Events
	Description	You do not have a license to use /Events.
	Action	Purchase a license for /Events. If you believe that you own and have installed the license for /Events, contact your BEA TUXEDO system Technical Support.
4357	ERROR: Unable to determine license level
	Description	An error occurred while retrieving the current license attributes.
	Action	Contact your BEA TUXEDO system Technical Support.
4358	ERROR: No license for /Events
	Description	You do not have a license to use /Events.
	Action	Purchase a license for /Events. If you believe that you own and have installed the license for /Events, contact your BEA TUXEDO system Technical Support.
4359	ERROR: Unable to determine license level
	Description	An error occurred while retrieving the current license attributes.
	Action	Contact your BEA TUXEDO system Technical Support.
4360	ERROR: No license for Transactions
	Description	You do not have a license to use Transactions.
	Action	Purchase a license for Transactions. If you believe that you own and have installed the license for Transactions, contact your BEA TUXEDO system Technical Support.
4363	ERROR: Unable to allocate message buffter
	Description	Message allocation failed for getting a message buffer by sbbl when sending message to DBBL to update sbbl sanity table.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4364	ERROR: Can not get DBBL record from BB
	Description	sbbl cannot find DBBL entry in the Bulletin Board. The Bulletin Board may be corrupted.
	Action	Contact your BEA TUXEDO system Technical Support.
4365	ERROR: Can not send msg to DBBL
	Description	sbbl cannot send message to DBBL to update sbbl sanity table.
	Action	Contact your BEA TUXEDO system Technical Support.
4366	ERROR: An error has occurred in completing the MIB request
	Description	DBBL took actions to send an error message to the blocking MIB operation requestor when DBBL found an expired entry in the sbbl sanity table. The possible cause could be sbbl cannot successfully register with Bulletin Board.
	Action	Reduce the number of blocking MIB operation at the same time. If the problem still occurs contact your BEA TUXEDO system Technical Support.
4367	ERROR: An error has occurred in completing the MIB request
	Description	sbbl took actions to send an error message to the blocking MIB operation requestor when sbbl cannot successfully register with Bulletin Board as a regular client process.
	Action	Reduce the number of blocking MIBS operation at the same time. If the problem still occurs contact your BEA TUXEDO system Technical Support.
4368	ERROR: Could not allocate internal TPINIT typed buffer
	Description	Memory allocation failed for getting a TPINIT buffer by sbbl when registering with Bulletin Board as a regular client.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4369	WARN: DBBLWAIT * 2 is greater than BLOCKTIME. DBBLWAIT = val,BLOCKTIME = val
	Description	The value used for DBBLWAIT (* 2) is greater than the value in BLOCKTIME.
	Action	Check the values used for both variables and adjust accordingly.
4370	WARN: DBBLWAIT * 2 is greater than BLOCKTIME. DBBLWAIT = val,BLOCKTIME = val
	Description	The value used for DBBLWAIT (* 2) is greater than the value in BLOCKTIME.
	Action	Check the values used for both variables and adjust accordingly.
4371	ERROR: Can't resolve host name in address address
	Description	While attempting to resolve the host name portion of address, an error occurred.
	Action	Any address which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the host name portion of address can be located by your DNS server.
4372	ERROR: Unknown address type: address
	Description	The given address does not correspond to a type known by the system.
	Action	The BEA TUXEDO system understands several types of address format. Addresses which start with // must be internet addresses. Addresses which start with 0x are hexadecimal representations of the address. Other formats may or may not be understood by the BEA TUXEDO system.
4373	ERROR: Can't resolve port number in address address
	Description	While attempting to resolve the port number portion of address, an error occurred.
	Action	Any address which starts with // must be a valid internet address. The following formats are recognized by the system: //host.name:port_number and //#.#.#.#:port_number. Other formats may be recognized. Make sure that DNS is working properly in your network, and that the port number portion of address can be located by your server.
4374	ERROR: Can't convert the address address to binary format
	Description	An error occurred while converting address to an internal binary representation.
	Action	Contact your BEA TUXEDO system Technical Support.
4393	ERROR: tprealloc for TPINIT failed - reason-code
	Description	ud or ud32 could not resize the TPINIT buffer
	Action	ud or ud32 may attempt to resize the TPINIT buffer when there is more user authentication data than expected. reason-code may provide insight into the cause of this failure. Make sure enough memory exists on the system running ud or ud32. If it appears that there should be enough memory to ud or ud32, and this error happens consistently, contact the BEA TUXEDO system Technical Support.
4376	WARN: Incompatible license information (val)
	Description	While booting a new node, the licensed features did not match those features licensed on the master node. This could potentially cause inconsistent results if the master node is migrated to this site or if certain capabilities are accessed from that site.
	Action	Ensure that the license file in $TUXDIR/udataobj on each machine in the application has the same features licensed to insure consistent behavior.
4377	ERROR: Permissions violation on SET request
	Description	A permissions violation has occurred while attempting to process an /AdminAPI SET request on the indicated class object. The attribute TA_BADFLD is set on the reply to indicate the field that is in violation of permissions.
	Action	The administrator can tune permissions for any attribute user combination to the maximum supported by the system. However, write access is not supported on all attributes in all class object states. Therefore, the update may need to be delayed until the class object is in a different state.
4378	ERROR: temp file creation failed
	Description	Creation of a temporary file in tmconfig using crtsrcpf on the AS/400 failed.
	Action	Ensure that there is sufficient space in /qsys.lib/qtemp.lib and re-run the operation.
4379	ERROR: temp file creation failed
	Description	Creation of a temporary file in tmconfig using crtsrcpf on the AS/400 failed.
	Action	Ensure that there is sufficient space in /qsys.lib/qtemp.lib and re-run the operation.
4382	ERROR: You do not have a valid SDK license
	Description	buildserver(1) was running without having a valid BEA TUXEDO system SDK license (e.g., only an RTK license was installed).
	Action	Buy a BEA TUXEDO system SDK license.
4383	ERROR: Memory allocation failure
	Description	An attempt to dynamically allocate memory from the operating system using malloc failed while parsing the UBBCONFIG file.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4384	ERROR: Memory allocation failure
	Description	An attempt to dynamically allocate memory from the operating system using malloc failed while parsing the UBBCONFIG file.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
4385	WARN: value val does not fit in character
	Description	While parsing the UBBCONFIG file, a hex escape sequence was found with a value larger than will fit in a single character (i.e., greater than 0xff).
	Action	Correct the value and re-run tmloadcf(1).
4386	WARN: dubious escape val
	Description	While parsing the UBBCONFIG file, a backslash escape preceding a character that is not a valid escape sequence (t, n, f, b, r, 0, backslash, n, x, or X).
	Action	Correct the value and re-run tmloadcf(1).
4387	WARN: value val does not fit in character
	Description	While parsing the UBBCONFIG file, an octal escape sequence was found with a value larger than will fit in a single character (i.e., greater than 0xff).
	Action	Correct the value and re-run tmloadcf(1).
4388	WARN: dubious escape val
	Description	While parsing the UBBCONFIG file, a backslash escape preceding a character that is not a valid escape sequence (t, n, f, b, r, 0, backslash, n, x, or X).
	Action	Correct the value and re-run tmloadcf(1).
4389	ERROR: string: -F option fails to reopen stderr
	Description	While running tmboot or tmshutdown on the AS/400, the program could not re-direct the standard error output into a file.
	Action	Re-run the operation. Ensure that there is sufficient file space.
4390	ERROR: Cannot open file file for reading
	Description	The event server couldn't open file file for reading the subscription database.
	Action	The event server reads a new copy of the subscription database from the temporary file file. This message indicates that the server couldn't open the temporary file for reading. Check the file system parameters and take corrective action.
4391	ERROR: can't open input file file
	Description	An error occurred attempting to open the input file specified as -ifile on the command line for ud or ud32.
	Action	Make sure the input file file exists and is readable.
4392	ERROR: can't open output file file
	Description	An error occurred attempting to open the output file file for write as specified by -ofile on the command line for ud or ud32.
	Action	Make sure file system limit has not been exceeded and user has write permissions for the directory in which the output file is to be created.