Corporate Info  |  News  |  Solutions  |  Products  |  Partners  |  Services  |  Events  |  Download  |  How To Buy
	http://www.oracle.com/technology/documentation/index.html   |   Site Map   |   Search   |   PDF Files   |   Contact   |   Glossary
Tuxedo Doc Home   |   Messages   |   Catalog List   |   Previous   |   Next

CMDTUX Messages 900-999

905	ERROR: Memory allocation failure
	Description	While executing tmloadcf, an attempt dynamically to allocate memory from the operating system using malloc() failed while parsing the UBBCONFIG file.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
	See Also	tmloadcf(1)
906	ERROR: Memory allocation failure
	Description	While executing tmloadcf, an attempt dynamically to allocate memory from the operating system using malloc() failed while parsing the UBBCONFIG file.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
	See Also	tmloadcf(1)
908	ERROR: Can't read *MACHINES section
	Description	During the tmshutdown process, the MACHINES section of the configuration file could not be read.
	Action	Verify that the environment variable TUXCONFIG is set correctly and exported, or that TUXCONFIG is not corrupted (try a tmunloadcf), or TUXCONFIG was propagated to all machines in the configuration.
	See Also	tmshutdown(1)
909	ERROR: Memory allocation failure
	Description	During the tmshutdown process, memory could not be allocated for a structure that holds information pertaining to the DBBL process.
	Action	Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
	See Also	tmshutdown(1)
910	ERROR: No DBBL exists
	Description	During the tmshutdown process, information pertaining to the DBBL in shared memory could not be located.
	Action	Ensure that the application IPC key is correct, or that no other application is using the same IPC key, or that the parameter TUXDIR is set correctly.
	See Also	tmshutdown(1)
911	ERROR: Memory allocation failure
	Description	During the tmshutdown process, memory could not be allocated for a structure that holds information pertaining to a BBL process.
	Action	Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
	See Also	tmshutdown(1)
912	ERROR: Memory allocation failure
	Description	During the tmshutdown process, memory could not be allocated for a structure that holds status information pertaining to the local BRIDGE.
	Action	Remove processes that may be tying up physical memory, ensure that the application IPC key is correct, or verify that the UNIX sysgen process sizing parameters are correct.
	See Also	tmshutdown(1)
913	ERROR: Can't shutdown BBL on PE machine causes partitioning
	Description	During the tmshutdown process, a determination is made if the BRIDGE local to the MASTER can be shut down. This determination fails if remote BBLs are active.
	Action	Determine why remote BBLs are still active and use pclean if necessary.
	See Also	tmshutdown(1)
918	ERROR: Can't shutdown servers, Memory allocation failure
	Description	During the tmshutdown process, memory could not be allocated for a list of servers to be shut down.
	Action	Kill any processes that may be tying up physical memory, verify that the UNIX sysgen specification for process sizing is correct, or ensure that the application IPC key is correct.
	See Also	tmshutdown(1)
919	ERROR: Can't shutdown TMS servers, error reading *GROUPS section
	Description	During the tmshutdown process, the GROUPS section of the configuration file could not be read.
	Action	Verify that the environment variable TUXCONFIG is set correctly and exported, or that TUXCONFIG is not corrupted (try a tmunloadcf), or TUXCONFIG was propagated to all machines in the configuration.
	See Also	tmshutdown(1)
920	ERROR: Can't shutdown servers, error reading *SERVERS section
	Description	During the tmshutdown process, the SERVERS section of the configuration file could not be read.
	Action	Verify that the environment variable TUXCONFIG is set correctly and exported, or that TUXCONFIG is not corrupted (try a tmunloadcf), or TUXCONFIG was propagated to all machines in the configuration.
	See Also	tmshutdown(1)
922	ERROR: Memory allocation failure
	Description	During the tmshutdown process, memory could not be allocated for a new link in an ordered list of processes to be shut down.
	Action	Try a partial shutdown if the configuration is too big, or ensure that the UNIX sysgen process sizing is correct.
	See Also	tmshutdown(1)
924	WARN: Can't find Server Group = svrgroup Id = srvid
	Description	During the tmshutdown process, a search of the BBL for a list of server ids failed.
	Action	Check for an erroneous IPC key or corrupted shared memory (two or more applications sharing the same IPC key).
	See Also	tmshutdown(1)
925	WARN: Bad Machine ID, machine_id in bulletin board
	Description	During the tmshutdown process, if an acknowledgment to an orderly shutdown message is not received from a remote process in a given time interval, the bridge on the remote machine is then asked, via a message, to send that process a software termination signal, SIGTERM. An invalid machine id associated with the remote process or BRIDGE is indicated by this message.
	Action	Check for an erroneous IPC key or corrupted shared memory (two or more applications sharing the same IPC key).
	See Also	tmshutdown(1)
932	INFO: System Shutdown Canceled
	Description	During the tmshutdown process, an interrupt was received from the user's terminal terminating the shutdown.
	Action	No action required.
	See Also	tmshutdown(1)
933	INFO: Server svrgrp/srvid not running
	Description	During tmshutdown -d, an entry in the BBL for the indicated process could not be found. Either the process was not booted or was previously shut down.
	Action	No action required.
	See Also	tmshutdown(1)
934	WARN: Can't update status of Server Group grpname Id srvid
	Description	During the tmshutdown process, the status of the process being terminated could not be updated. Either a BBL lock could not be obtained, the machine id was incorrect, or the server id did not match an entry in the BBL.
	Action	Check for an invalid IPC key or a corrupted BBL.
	See Also	tmshutdown(1)
937	INFO: Still running
	Description	During tmshutdown -n, indicates that the process, administrative or server, is still active.
	Action	No action required.
	See Also	tmshutdown(1)
938	WARN: Can't report BB resource usage on svrgrp/srvid Memory allocation failure
	Description	During tmshutdown -n, space for the list of system IPC resources held by each BBL could not be allocated.
	Action	Remove processes that are tying up physical memory, and verify that the UNIX sysgen parms for processes are sized adequately.
	See Also	tmshutdown(1)
939	ERROR: Failed
	Description	During the tmshutdown process, space for the reply to the message directing an administrative process or server to shut down could not be allocated, and the debugging option was specified, or the -q option was not specified. This directs the failed message to standard error.
	Action	Remove processes that are tying up physical memory, and verify that the UNIX sysgen parms for processes are sized adequately.
	See Also	tmshutdown(1)
940	ERROR: Memory allocation failure
	Description	During the tmshutdown process, space for the reply to the message directing an administrative process or server to shut down could not be allocated.
	Action	Remove processes that are tying up physical memory, and verify that the UNIX sysgen parms for processes are sized adequately.
	See Also	tmshutdown(1)
941	WARN: No active alternate LMID for migration
	Description	During tmshutdown -R, the system discovered that none of the alternative machine locations specified for migration were active (did not have a running BBL).
	Action	Check for a partitioned network, make sure that the migration machine or the group migration values specified in the configuration file are correct, and the corresponding BBL(s) are active and functioning.
942	WARN: Can't shutdown server
	Description	During tmshutdown -q, the shutdown message send to a server failed. Either the receiving process is dead, no acknowledgment to the send was received, or the send itself failed.
	Action	Check for a partitioned network or a dead server on the remote PE.
	See Also	tmshutdown(1)
943	INFO: Server (svrgrp/srvid) was shutdown for migration
	Description	During the tmshutdown process, the shutdown message send to a server failed because it had migrated or was in the process of migrating.
	Action	No action required.
	See Also	tmshutdown(1)
944	WARN: Can't shutdown server (svrgrp/srvid)
	Description	During tmshutdown -q, the shutdown message send to a server failed. Either the receiving process is dead, no acknowledgment to the send was received, or the send itself failed.
	Action	Check for a partitioned network or a dead server on the remote PE.
	See Also	tmshutdown(1)
945	WARN: Server was shutdown for migration
	Description	During the tmshutdown process, the reply to the shutdown message sent to a server on a remote machine was not received in a specified time interval, nor was it in the process of migrating.
	Action	Check for a partitioned network or a dead server on the remote PE.
	See Also	tmshutdown(1)
946	INFO: Server (svrgrp/srvid) was shutdown for migration
	Description	During the tmshutdown process, the reply to the shutdown message sent to a server on a remote machine was not received in a specified time interval. The server was shut down during a prior migration, or is in the process of shutting down from a recent migration request.
	Action	No action required.
	See Also	tmshutdown(1)
947	WARN: Can't shutdown server (svrgrp/srvid)
	Description	During tmshutdown -q, the reply to the shutdown message sent to a process on a remote machine was not received in a specified time interval. Another possibility is that the server died; shutdown of an inactive server causes a warning message.
	Action	Check for network partition and resubmit tmshutdown, or do kill -9 on the remote machine and clean up IPC resources.
	See Also	tmshutdown(1)
949	WARN: Shutdown failed
	Description	During the tmshutdown process, the message sent to a process on a remote machine, telling the process to stop in an orderly fashion, returned with a failure indication.
	Action	Resubmit tmshutdown, or do kill -9 on the remote machine and clean up IPC resources.
	See Also	tmshutdown(1)
950	INFO: BB resources on grpname not removed
	Description	During tmshutdown -n, the system resource information associated with a Bulletin Board is displayed but not removed. Examples of system resource information are shared memory and semaphores.
	Action	No action required.
	See Also	tmshutdown(1)
951	INFO: BB resources on grpname not removed
	Description	During tmshutdown -n, the system resource information associated with a Bulletin Board is displayed but not removed. Examples of system resource information are shared memory and semaphores.
	Action	No action required.
	See Also	tmshutdown(1)
952	ERROR: Memory allocation failure
	Description	During the tmshutdown, process space could not be allocated for all of the server table entry structures associated with each BBL in the configuration.
	Action	Check for wrong shared memory IPC key or corrupted shared memory, or kill extraneous processes that may be tying up physical memory.
	See Also	tmshutdown(1)
953	ERROR: Can't find BBL's
	Description	During the tmshutdown process, no BBL server table entries were located in the Bulletin Board, or a lock could not be obtained to search the Bulletin Board.
	Action	Check for wrong shared memory IPC key or corrupted shared memory, or kill the process holding the Bulletin Board lock.
	See Also	tmshutdown(1)
962	ERROR: BB resources not removed
	Description	The -n option was specified with tmshutdown and the system resource information (for example, shared memory or semaphores) associated with a Bulletin Board could not be found. Either the message request for this information failed, or the message request to the PE returned with an indication of no such information.
	Action	Check for a partitioned network, network failure, or no application running on the remote PE(s).
	See Also	tmshutdown(1)
963	WARN: Status of BB resources unknown
	Description	The system resource information associated with a Bulletin Board could not be found during tmshutdown. Examples of system resource information are shared memory and semaphores. Either the message request for this information failed, or the message request to the PE returned with an indication of no such information.
	Action	Check for a partitioned network, network failure, or no application running on the remote PE(s).
	See Also	tmshutdown(1)
971	ERROR: Invalid option option_val
	Description	The option specified is not a valid option to the tmunloadcf command.
	Action	Correct the options to the tmunloadcf command as per the usage message.
	See Also	tmunloadcf(1)
973	ERROR: Invalid argument - argval
	Description	The argument specified is not a valid argument to the tmunloadcf command. There are no options or arguments to tmunloadcf.
	Action	Correct the argument to the tmunloadcf command as per the usage message - there are no arguments to the command.
	See Also	tmunloadcf(1)
976	ERROR: TUXCONFIG environment variable not set
	Description	The TUXCONFIG environment variable is not set. TUXCONFIG must be set to the path to the UBBCONFIG file.
	Action	Set the TUXCONFIG environment variable to the full path of the UBBCONFIG file.
	See Also	tmunloadcf(1)
977	ERROR: Error in reading TUXCONFIG file
	Description	An error occurred when trying to read the TUXCONFIG file pointed to by the TUXCONFIG environment variable. Surrounding messages may give more information as to the cause.
	Action	Make sure the TUXCONFIG file is set appropriately and the file has correct permissions. See possible surrounding messages for more information. It is possible that the TUXCONFIG file is corrupted.
	See Also	tmunloadcf(1)
978	ERROR: malloc failure
	Description	An attempt dynamically to allocate memory from the operating system using malloc() failed while allocating space for the entries in the TUXCONFIG file.
	Action	Ensure that the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
	See Also	tmunloadcf(1), malloc(3) in UNIX reference manuals
979	ERROR: Option -d argument arg_value not numeric
	Description	The -d option to the ud command specifies the maximum delay time in seconds before timeout. The -d option requires an argument, which must be numeric. The option argument supplied was not numeric.
	Action	Correct the argument to the ud command so that the -d option has a numeric argument, and reexecute the command.
	See Also	ud(1)
980	ERROR: Cannot use the -d and -r options together
	Description	The -d and -r options to ud are mutually exclusive. The -d option specifies the maximum delay in receiving a reply before timeout. The -r option states that no reply is expected.
	Action	Change the arguments to the ud command so that the -d and -r options are not both specified and reexecute the command.
	See Also	ud(1)
981	ERROR: Cannot use the -d and -r options together
	Description	See message 980 for an explanation.
	Action	See message 980 for an explanation.
	See Also	ud(1)
982	ERROR: Argument arg_value to -s not numeric
	Description	The -s option to ud specifies a sleep time between requests. This option requires an option argument, which must be numeric. The option argument specified by the user was not numeric.
	Action	Correct the arguments to the ud command so that the -s option has a numeric subargument, and reexecute the command.
	See Also	ud(1)
983	ERROR: Argument arg_value to -t not numeric
	Description	The -t option to ud specifies a transaction timeout value in seconds. This option requires an option argument, which must be numeric. The option argument specified by the user was not numeric.
	Action	Correct the arguments to the ud command so that the -t option has a numeric subargument, and reexecute the command.
	See Also	ud(1)
984	ERROR: Can't have transaction and no reply
	Description	The user specified options to ud that combined the transaction mode option, -t, with the no reply option, -r. This is not allowed.
	Action	Change the arguments to the ud command so that the -r and -t options are not both specified and reexecute the command.
	See Also	ud(1)
985	ERROR: Cannot combine transaction (-t) and message delay (-d)
	Description	The user specified options to ud that combined the transaction mode option, -t, with the message delay option, -d. This is not allowed.
	Action	Change the arguments to the ud command so that the -d and -t options are not both specified and reexecute the command.
	See Also	ud(1)
988	ERROR: ud detected syntax error in fielded buffer #buf
	Description	One of the fielded buffers passed as input to the ud program has invalid syntax.
	Action	Inspect the input data to ud and correct any errors in the input format.
	See Also	ud(1)
989	ERROR: No service in FBFR
	Description	One of the input buffers to ud did not contain a service name.
	Action	Be sure to include a line with fieldname SRVCNM, a tab character, and the name of a service in every fielded buffer input to ud.
	See Also	ud(1)
991	ERROR: Can't send buffer buf
	Description	ud was unable to send a buffer to the requested service. It is also possible that the transaction or service timed out. A description of the particular error encountered is included in the latter half of the message.
	Action	To deal with the most common causes of error, verify that the service specified in the ud input buffer exists, is not a conversational service, and is available, that the service accepts FML input buffers, and that the server supports transactions if the -t option of ud was specified. The tpcall(3) manual page contains information on these and other conditions that could cause an error return from tpacall.
	See Also	ud(1), tpcall(3)
993	ERROR: Return packet time out
	Description	A service call request made by ud has timed out. This can occur either due to a transaction timeout or a blocking timeout.
	Action	Determine whether it is necessary to allocate a longer time for this transaction or service call to complete. If so, increase the time specified with the -t option if using transaction mode, or use the -d option if not running in transaction mode. Reexecute the failed request.
	See Also	ud(1), tpcall(3)
994	ERROR: Reply failure - tperrno_message
	Description	The tpgetrply() function was called from within ud to receive the response from a service request, and returned an error. A description of the particular error encountered is included in the latter part of the message.
	Action	Refer to the tpcall(3) manual page for information on the particular errors returned.
	See Also	ud(1), tpcall(3)
998	ERROR: Too many errors encountered, exiting
	Description	The ud command has encountered too many errors, and is exiting. The maximum number of allowable errors defaults to 25, and may be specified explicitly using the -e option.
	Action	Investigate the earlier errors reported by ud, and try to eliminate as many as possible. If it is an expected condition for a large number of service calls to return errors, invoke with the -e option to specify an explicit error limit.
	See Also	ud(1)